AD7249 LC2MOS Dual 12-Bit Serial DACPORT

The AD7249 DACPORT® contains a pair of 12-bit, voltage-ouput, digital-to-analog converters with output amplifiers and Zener voltage reference on a monolithic CMOS chip. No external trims are required to achieve full specified performance. The output amplifiers are capable of developing +10 V across a 2 k(Ohm) load. The output voltage ranges with single supply operation are 0 V to +5 V or 0 V to +10 V, while an additional bipolar ±5V output range is available with dual supplies. The ranges are selected using the internal gain resistor. Interfacing to the AD7249 is serial, minimizing pin count and allowing a small package size. Standard control signals allow interfacing to most DSP processors and microcontrollers. The data stream consists of 16 bits, DB15 to DB13 are don't care bits, the 13th bit (DB12) is used as the channel select bit and the remaining 12 bits (DB11 to DB0) contain the data to update the DAC. The 16-bit data word is clocked into the input register on each falling SCLK edge. The data format is natural binary in both unipolar ranges, while either offset binary or twos complement format may be selected in the bipolar range. A CLR function is provided which sets the ouput to 0 V in both unipolar ranges and in the twos complement bipolar range, while with offset binary data format, the ouput is set to -REFIN. This function is useful as a power-on reset as it allows the outputs to be set to a known voltage level. The AD7249 features a serial interface which allows easy connection to both microcomputers and 16-bit digital signal processors with serial ports. The serial data may be applied at rates up to 2 MHz allowing a DAC update rate of 125 kHz. The AD7249 is fabricated on linear compatible CMOS (LC2MOS), an advanced, mixed technology process. It is packaged in 16-pin DIP and 16-pin SOIC packages. DACPORT is a registered trademark of Analog Devices, Inc.

Features and Benefits
  • Two 12-Bit CMOS DAC Channels with
  • On-Chip Voltage Reference
  • Output Amplifiers
  • Three Selectable Output Ranges per Channel
  • -5 V to + 5 V, 0 V to +5 V, 0 V to +10 V
  • Serial Interface
  • 125 kHz DAC Update Rate
  • Small Size: 16-Lead DIP or SOIC
  • Low Power Dissipation
Digital to Analog Converters
Data Sheets
Documentnote
AD7249: LC2MOS Dual 12-Bit Serial DACPORT® Data Sheet (Rev. D)PDF 149 kB
Application Notes
Documentnote
AN-214: Ground Rules for High Speed CircuitsPDF 356 kB
AN-348: Avoiding Passive-Component PitfallsPDF 931 kB
AN-225: 12-Bit Voltage-Output DACs for Single-Supply 5V and 12V SystemsPDF 237 kB
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
AD7249ANZ Production16 ld PDIPOTH 25-40 to 85C16.9214.17Y
AD7249AR Production16 ld SOIC - WideOTH 47-40 to 85C16.4113.74N
AD7249AR-REEL Production16 ld SOIC - WideREEL 1000-40 to 85C013.74N
AD7249ARZ Production16 ld SOIC - WideOTH 47-40 to 85C14.9212.49Y
AD7249ARZ-REEL Production16 ld SOIC - WideREEL 1000-40 to 85C012.49Y
AD7249BNZ Production16 ld PDIPOTH 25-40 to 85C21.1117.71Y
AD7249BR Production16 ld SOIC - WideOTH 47-40 to 85C20.517.18N
AD7249BR-REEL Production16 ld SOIC - WideREEL 1000-40 to 85C00N
AD7249BRZ Production16 ld SOIC - WideOTH 47-40 to 85C18.6415.62Y
AD7249BRZ-REEL Production16 ld SOIC - WideREEL 1000-40 to 85C015.62Y
AD7249SQ Production16 ld CerDIPOTH 25-55 to 125C47.9340.99N
Reference Materials
AD7249: LC2MOS Dual 12-Bit Serial DACPORT® Data Sheet (Rev. D) ad7249
AN-214: Ground Rules for High Speed Circuits ad1674
AN-348: Avoiding Passive-Component Pitfalls ad7813
AN-348: 避开无源元件的陷阱 adg901
AN-225: 12-Bit Voltage-Output DACs for Single-Supply 5V and 12V Systems ad7542
Digital to Analog Converters ICs Solutions Bulletin ad5590