The AD7475 offers 1 MSPS throughput rates with 4.5 mW power consumption. Single-supply operation with VDRIVE function. The AD7475/AD7495 operate from a single 2.7 V to 5.25 V supply. The VDRIVE function allows the serial interface to connect directly to either 3 V or 5 V processor systems independent of VDD. Flexible power/serial clock speed management. The conversion rate is determined by the serial clock, allowing the conversion time to be reduced through the serial clock speed increase. The parts also feature shutdown modes to maximize power efficiency at lower throughput rates. This allows the average power consumption to be reduced while not converting. Power consumption is 1 μA when in full shutdown. No pipeline delay. The parts feature a standard successive approximation ADC with accurate control of the sampling instant via a CS input and once-off conversion control. Applications Battery-powered systems Personal digital assistants Medical instruments Mobile communications Instrumentation and control systems Data acquisition systems Optical sensors ol { margin-top:0px; margin-right:0px; margin-bottom:0px; margin-left:25px; padding-top:0px; padding-right:0px; padding-bottom:10px; padding-left:0px;} li { padding-top:0px; padding-right:0px; padding-bottom:5px; padding-left:0px; margin-top:0px; margin-right:0px; margin-bottom:0px; margin-left:0px;}
The AD7475/AD7495 are 12-bit, high speed, low power, successive-approximation ADCs that operate from a single 2.7 V to 5.25 V power supply with throughput rates up to 1 MSPS. They contain a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies above 1 MHz.
The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and conversion is initiated at this point. The conversion time is determined by the SCLK frequency. There are no pipeline delays associated with the part.
The AD7475/AD7495 use advanced design techniques to achieve very low power dissipation at high throughput rates. With 3 V supplies and a 1 MSPS throughput rate, the AD7475 consumes just 1.5 mA, while the AD7495 consumes 2 mA. With 5 V supplies and 1 MSPS, the current consumption is 2.1 mA for the AD7475 and 2.6 mA for the AD7495.
The analog input range for the parts is 0 V to REF IN. The 2.5 V reference for the AD7475 is applied externally to the REF IN pin, while the AD7495 has an on-board 2.5 V reference.
Product Highlights
Features and Benefits
| Analog to Digital Converters |
| Document | note |
| AD7475/AD7495: 1 MSPS, 12-Bit ADCs Data Sheet (Rev. C) | PDF 446 kB |
| Document | note |
| 8- to 18-Bit SAR ADCs ... From the Leader in High Performance Analog | PDF 1885 kB |
| Part Number | Package | Packing Qty | Temp Range | Price 100-499 | Price 1000+ | RoHS |
|---|---|---|---|---|---|---|
| AD7495AR Production | 8 ld SOIC | OTH 98 | -40 to 85C | 0 | 0 | N |
| AD7495AR-REEL Production | 8 ld SOIC | REEL 2500 | -40 to 85C | 0 | 0 | N |
| AD7495AR-REEL7 Production | 8 ld SOIC | REEL 1000 | -40 to 85C | 0 | 0 | N |
| AD7495ARM Production | 8 ld MSOP | OTH 50 | -40 to 85C | 0 | 0 | N |
| AD7495ARMZ Production | 8 ld MSOP | OTH 50 | -40 to 85C | 7.32 | 6.14 | Y |
| AD7495ARMZ-REEL7 Production | 8 ld MSOP | REEL 1000 | -40 to 85C | 0 | 6.14 | Y |
| AD7495ARZ Production | 8 ld SOIC | OTH 98 | -40 to 85C | 7.32 | 6.14 | Y |
| AD7495ARZ-REEL7 Production | 8 ld SOIC | REEL 1000 | -40 to 85C | 0 | 6.14 | Y |
| AD7495BRMZ Production | 8 ld MSOP | OTH 50 | -40 to 85C | 8.67 | 7.27 | Y |
| AD7495BRZ Production | 8 ld SOIC | OTH 98 | -40 to 85C | 8.67 | 7.27 | Y |
| AD7495BRZ-REEL7 Production | 8 ld SOIC | REEL 1000 | -40 to 85C | 0 | 7.27 | Y |
