AD8027 Low Distortion, High Speed Rail-to-Rail Input/Output Amplifier

The AD8027/AD8028 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and a wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at 1 MHz). In applications that use a fraction of or use the entire input dynamic range and require low distortion, the AD8027/AD8028 are ideal choices.

Many rail-to-rail input amplifiers have an input stage that switches from one differential pair to another as the input signal crosses a threshold voltage, which causes distortion. The AD8027/AD8028 have a unique feature that allows the user to select the input crossover threshold voltage through the DISABLE/SELECT pin (DISABLE/SELECT x in the 10-lead MSOP, hereafter referred to as DISABLE/SELECT throughout this data sheet). This feature controls the voltage at which the complementary transistor input pairs switch. The AD8027/AD8028 also have intrinsically low crossover distortion.

With their wide supply voltage range (2.7 V to 12 V) and wide bandwidth (190 MHz), the AD8027/AD8028 amplifiers are designed to work in a variety of applications where speed and performance are needed on low supply voltages. The high performance of the AD8027/AD8028 is achieved with a quiescent current of only 6.5 mA (typical) per amplifier. The AD8027/AD8028 have a shutdown mode that is controlled via the DISABLE/SELECT pin.

The AD8027/AD8028 are available in 8-lead SOIC, 6-lead SOT-23, and 10-lead MSOP packages. The AD8028WARMZ-R7 is an automotive grade version, qualified for automotive applications. See the Automotive Products section for more details. The AD8027/AD8028 family is designed to work over the extended temperature range of −40°C to +125°C.

Applications

Features and Benefits
  • High speed
  • 190 MHz, −3 dB bandwidth (G = +1)
  • 100 V/µs slew rate
  • Low distortion
  • 120 dBc at 1 MHz SFDR
  • 80 dBc at 5 MHz SFDR
  • Selectable input crossover threshold
  • Low noise
  • 4.3 nV/√Hz
  • 1.6 pA/√Hz
  • Low offset voltage: 900 µV maximum
  • Low power: 6.5 mA per amplifier supply current
  • Power-down mode
  • No phase reversal: VIN > |VS| + 200 mV
  • Wide supply range: 2.7 V to 12 V
  • Small packaging: 8-lead SOIC, 6-lead SOT-23, 10-lead MSOP
  • Qualified for automotive applications (AD8028WARMZ-R7 only)
  • Amplifiers
    SPICE Models
    Reference Designs
    Data Sheets
    Documentnote
    AD8027/AD8028: Low Distortion, High-Speed Rail-to-Rail Input/Output Amplifiers Data Sheet (Rev. D)PDF 606 kB
    Application Notes
    Documentnote
    AN-402: Replacing Output Clamping Op Amps with Input Clamping AmpsPDF 55 kB
    AN-581: Biasing and Decoupling Op Amps in Single Supply Applications (Rev. 0)PDF 166 kB
    AN-417: Fast Rail-to-Rail Operational Amplifiers Ease Design Constraints in Low Voltage High Speed SystemsPDF 228 kB
    AN-649: Using the Analog Devices Active Filter Design Tool (Rev. 0)PDF 5.3 M
    User Guides
    Documentnote
    UG-838: Evaluation Board for Single, High Speed Op Amps Offered in 5-Lead SOT-23 and 6-Lead SOT-23 PackagesPDF 184.4 K
    UG-755: 8-Lead SOIC Amplifier Evaluation Board User GuidePDF 276 K
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    AD8027ARTZ-R2 Production6 ld SOT-23REEL 250-40 to 125C1.391.39Y
    AD8027ARTZ-REEL7 Production6 ld SOT-23REEL 3000-40 to 125C01.2Y
    AD8027ARZ Production8 ld SOICOTH 98-40 to 125C1.421.2Y
    AD8027ARZ-REEL Production8 ld SOICREEL 2500-40 to 125C01.2Y
    AD8027ARZ-REEL7 Production8 ld SOICREEL 1000-40 to 125C1.421.2Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    EVAL-HSOPAMP-1CPZEvaluation Board for 8-LD LFCSP18.25Y
    EVAL-HSOPAMP-1KSZEvaluation Bare Board for 5 and 6-lead SC70 Package18.25Y
    EVAL-HSOPAMP-1RJZEvaluation Bare Board for SOT-23 Package18.25Y
    EVAL-HSOPAMP-1RZEvaluation Bare Board for 8-lead SOIC Package18.25Y
    EVAL-HSOPAMP-E-1RZEvaluation Bare Board for 8 Lead SOIC dedicated feedback with epad connection18.25Y
    EVAL-HSOPAMP-N-1RZEvaluation Bare Board for 8 Lead SOIC w/Null or Compensation functionality on Pins 1 and or 818.25Y
    Reference Materials
    AD8027/AD8028: Low Distortion, High-Speed Rail-to-Rail Input/Output Amplifiers Data Sheet (Rev. D) ad8027
    AD8027/AD8028: 低失真、高速轨到轨输入/输出放大器 (Rev. C) ad8027
    AD8027 SPICE Model ad8027
    CN0332 Design & Integration Files adcmp601
    AN-402: Replacing Output Clamping Op Amps with Input Clamping Amps ad829
    AN-581: Biasing and Decoupling Op Amps in Single Supply Applications (Rev. 0) ad829
    AN-417: Fast Rail-to-Rail Operational Amplifiers Ease Design Constraints in Low Voltage High Speed Systems ad829
    AN-402: 以输入箝位放大器取代输出箝位运算放大器 (Rev. 0) ad829
    AN-417: 在低压高速系统中利用快速轨到轨运算放大器减少设计限制 (Rev. 0) ad829
    AN-581: 单电源应用中的偏置和去耦运算放大器 (Rev. 0) ad829
    AN-649: Using the Analog Devices Active Filter Design Tool (Rev. 0) ad8350
    UG-838: Evaluation Board for Single, High Speed Op Amps Offered in 5-Lead SOT-23 and 6-Lead SOT-23 Packages ad8055
    UG-755: 8-Lead SOIC Amplifier Evaluation Board User Guide ad9631
    MT-060: Choosing Between Voltage Feedback and Current Feedback Op Amps ad829
    MT-032:理想的电压反馈型(VFB)运算放大器 ad829
    MT-059: 补偿输入电容对电流电压转换器所用电压反馈和电流反馈型运算放大器的影响 ad9631
    MT-058: 反馈电容对VFB和CFB运算放大器的影响 ad829
    MT-056: 高速电压反馈运算放大器 ad829
    MT-053:运算放大器失真:HD、THD、THD + N、IMD、SFDR、MTPR ad829
    MT-052:运算放大器噪声指数:不要被误导 ad829
    MT-050: 二阶系统的运算放大器总输出噪声计算 ad9631
    MT-049:单极点系统的运算放大器总输出噪声计算 ad829
    MT-048:运算放大器噪声关系:1/f噪声、均方根(RMS)噪声与等效噪声带宽 ad829
    MT-047:运算放大器噪声 ad829
    MT-033:电压反馈型运算放大器的增益和带宽 ad829
    MT-032: Ideal Voltage Feedback (VFB) Op Amp ad829
    SAR ADC & Driver Quick-Match Guide ad7476
    High Speed Amplifiers Selection Table ad8138
    CN0332:磁阻(MR)式转速传感器 adp1720