AD827 High Speed, Low Power Dual Op Amp

The AD827 is a dual version of Analog Device's industry-standard AD847 op amp. Like the AD847, it provides high speed, low power performance at low cost. The AD827 achieves a 300 V/µs slew rate and 50 MHz unity-gain bandwidth while consuming only 100 mW when operating from ±5 volt power supplies. Performance is specified for operation using ±5 V to ±15 V power supplies.

The AD827 offers an open-loop gain of 3,500 V/V into 500 Ohm loads. It also features a low input voltage noise of 15 nV/(root)Hz, and a low input offset voltage of 2 mV maximum. Common-mode rejection ratio is a minimum of 80 dB. Power supply rejection ratio is maintained at better than 20 dB with input frequencies as high as 1 MHz, thus minimizing noise feedthrough from switching power supplies.

The AD827 is also ideal for use in demanding video applications, driving coaxial cables with less than 0.04% differential gain and 0.19° differential phase errors for 643 mV p-p into a 75 Ohm reverse terminated cable.

The AD827 is also useful in multichannel, high speed data conversion systems where its fast (120 ns to 0.1%) settling time is of importance. In such applications, the AD827 serves as an input buffer for 8-bit to 10-bit A/D converters and as an output amplifier for high speed D/A converters.

Features and Benefits
  • High Speed
    50 MHz Unity Gain Stable Operation
    300 V/µs Slew Rate
    120 ns Settling Time
    Drives Unlimited Capacitive Loads
  • Excellent Video Performance
    0.04% Differential Gain @ 4.4 MHz
    0.198 Differential Phase @ 4.4 MHz
  • Good DC Performance
    2 mV max Input Offset Voltage
    15 mV/8C Input Offset Voltage Drift
    Available in Tape and Reel in
    Accordance with EIA-481A Standard
  • Low Power
    Only 10 mA Total Supply Current for
    Both Amplifiers ±5 V to ±15 V
    Supplies
  • Amplifiers
    AD827 SPICE Macro Model
    Data Sheets
    Documentnote
    AD827: High Speed, Low Power Dual Op Amp Data Sheet (Rev. C)PDF 222 kB
    AD827: Military Data Sheet
    Application Notes
    Documentnote
    AN-402: Replacing Output Clamping Op Amps with Input Clamping AmpsPDF 55 kB
    AN-581: Biasing and Decoupling Op Amps in Single Supply Applications (Rev. 0)PDF 166 kB
    AN-417: Fast Rail-to-Rail Operational Amplifiers Ease Design Constraints in Low Voltage High Speed SystemsPDF 228 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    5962-9211701M2A ProductionLCC:CER LEADLESS CHIP CARROTH 54-55 to 125C84.6180.45N
    5962-9211701MPA Production8 ld CerDIPOTH 48-55 to 125C37.2433.52N
    AD827AQ Production8 ld CerDIPOTH 48-40 to 85C9.838.88N
    AD827JCHIPS ProductionCHIPS OR DIEREEL 1400 to 70C08.8Y
    AD827JN Production8 ld PDIPOTH 500 to 70C7.877.11N
    AD827JNZ Production8 ld PDIPOTH 500 to 70C7.176.48Y
    AD827JRZ-16 Production16 ld SOIC - WideOTH 470 to 70C6.525.89Y
    AD827JRZ-16-REEL Production16 ld SOIC - WideREEL 10000 to 70C05.89Y
    AD827JRZ-16-REEL7 Production16 ld SOIC - WideREEL 2500 to 70C05.89Y
    AD827SCHIPS ProductionCHIPS OR DIEREEL 140-55 to 125C25.1822.89Y
    AD827SE/883B ProductionLCC:CER LEADLESS CHIP CARROTH 54-55 to 125C93.0584.13N
    AD827SQ Production8 ld CerDIPOTH 48-55 to 125C27.3124.69N
    AD827SQ/883B Production8 ld CerDIPOTH 48-55 to 125C40.9737.04N
    Reference Materials
    AD827: High Speed, Low Power Dual Op Amp Data Sheet (Rev. C) ad827
    AD827 SPICE Macro-Model, Rev. A 07/06, TRW ad827
    AD827j SPICE Macro-Model, Rev A 07/06, TRW ad827
    AD827a SPICE Macro-Model, Rev A 07/06, TRW ad827
    AD827: Military Data Sheet ad827
    AN-402: Replacing Output Clamping Op Amps with Input Clamping Amps ad829
    AN-581: Biasing and Decoupling Op Amps in Single Supply Applications (Rev. 0) ad829
    AN-417: Fast Rail-to-Rail Operational Amplifiers Ease Design Constraints in Low Voltage High Speed Systems ad829
    AN-402: 以输入箝位放大器取代输出箝位运算放大器 (Rev. 0) ad829
    AN-417: 在低压高速系统中利用快速轨到轨运算放大器减少设计限制 (Rev. 0) ad829
    AN-581: 单电源应用中的偏置和去耦运算放大器 (Rev. 0) ad829
    MT-060: Choosing Between Voltage Feedback and Current Feedback Op Amps ad829
    MT-032:理想的电压反馈型(VFB)运算放大器 ad829
    MT-058: 反馈电容对VFB和CFB运算放大器的影响 ad829
    MT-056: 高速电压反馈运算放大器 ad829
    MT-053:运算放大器失真:HD、THD、THD + N、IMD、SFDR、MTPR ad829
    MT-052:运算放大器噪声指数:不要被误导 ad829
    MT-050: 二阶系统的运算放大器总输出噪声计算 ad9631
    MT-049:单极点系统的运算放大器总输出噪声计算 ad829
    MT-048:运算放大器噪声关系:1/f噪声、均方根(RMS)噪声与等效噪声带宽 ad829
    MT-047:运算放大器噪声 ad829
    MT-032: Ideal Voltage Feedback (VFB) Op Amp ad829
    High Speed Amplifiers Selection Table ad8138