AD8366 DC to 600 MHz, Dual-Digital Variable Gain Amplifiers

The AD8366 is a matched pair of fully differential, low noise and low distortion, digitally programmable variable gain amplifiers (VGAs). The gain of each amplifier can be programmed separately or simultaneously over a range of 4.5 dB to 20.25 dB in steps of 0.25 dB. The amplifier offers flat frequency performance from dc to 70 MHz, independent of gain code. Baseband I/Q receivers Diversity receivers Wideband ADC drivers

The AD8366 offers excellent spurious-free dynamic range, suitable for driving high resolution analog-to-digital converters (ADCs). The NF at maximum gain is 11.4 dB at 10 MHz and increases ~2 dB for every 4 dB decrease in gain. Over the entire gain range, the HD3/HD2 are better than −90 dBc for 2 V p-p at the output at 10 MHz into 200 Ω. The two-tone intermodulation distortion of −90 dBc into 200 Ω translates to an OIP3 of 45 dBm (38 dBVrms). The differential input impedance of 200 Ω provides a well-defined termination. The differential output has a low impedance of ~25 Ω.

The output common-mode voltage defaults to VPOS/2 but can be programmed via the VCMA and VCMB pins over a range of voltages. The input common-mode voltage also defaults to VPOS/2 but can be driven down to 1.5 V. A built-in, dc offset compensation loop can be used to eliminate dc offsets from prior stages in the signal chain. This loop can also be disabled if dc-coupled operation is desired.

The digital interface allows for parallel or serial mode gain programming. The AD8366 operates from a 4.75 V to 5.25 V supply and consumes typically 180 mA. When disabled, the part consumes roughly 3 mA. The AD8366 is fabricated using Analog Devices, Inc., advanced silicon-germanium bipolar process, and it is available in a 32-lead exposed paddle LFCSP package. Performance is specified over the −40°C to +85°C temperature range.

Features and Benefits
  • Matched pair of differential, digitally controlled VGAs
  • Gain range: 4.5 dB to 20.25 dB
  • 0.25 dB gain step size
  • Operating frequency
       DC to 150 MHz (2 V p-p)
       3 dB bandwidth: 600 MHz
  • Noise figure (NF)
       11.4 dB at 10 MHz at maximum
          gain
       18 dB at 10 MHz at minimum
          gain
  • OIP3: 45 dBm at 10 MHz
  • HD2/HD3
       Better than −90 dBc for 2 V p-p
          output at 10 MHz at
          maximum gain
  • Differential input and output
  • Adjustable output common-mode
  • Optional dc output offset correction
  • Serial/parallel mode gain control
  • Power-down feature
  • Single 5 V supply operation
  • RF & Microwave
    S-Parameters
    Data Sheets
    Documentnote
    AD8366: DC to 600 MHz, Dual-Digital Variable Gain Amplifiers Data Sheet (Rev. A)PDF 513 kB
    Frequently Asked Questions
    Documentnote
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    AD8366ACPZ-R7 Production32 ld LFCSP (5x5x.85mm) w/2.7exposed padREEL 1500-40 to 85C06.57Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    AD8366-EVALZEvaluation Board99Y
    Reference Materials
    AD8366: DC to 600 MHz, Dual-Digital Variable Gain Amplifiers Data Sheet (Rev A, 03/2011) AD8366
    AD8366 S-Parameters ad8366
    AD8366: DC to 600 MHz, Dual-Digital Variable Gain Amplifiers Data Sheet (Rev. A) ad8366
    RF Source Booklet adf9010