AD8375 Ultralow Distortion IF VGA

The AD8375 is a digitally controlled, variable gain, wide bandwidth amplifier that provides precise gain control, high IP3, and low noise figure. The excellent distortion performance and high signal bandwidth make the AD8375 an excellent gain control device for a variety of receiver applications. Using an advanced high speed SiGe process and incorporating proprietary distortion cancellation techniques, the AD8375 achieves 50 dBm output IP3 at 200 MHz.

The AD8375 provides a broad 24 dB gain range with 1 dB resolution. The gain is adjusted through a 5-pin control interface and can be driven using standard TTL levels. The open-collector outputs provide a flexible interface, allowing the overall signal gain to be set by the loading impedance. Thus, the signal voltage gain is directly proportional to the load.

The AD8375 is powered on by applying the appropriate logic level to the PWUP pin. The quiescent current of the AD8375 is typically 130 mA. When powered down, the AD8375 consumes less than 5 mA and offers excellent input-to-output isolation.

Fabricated on an Analog Devices, Inc., high speed SiGe process, the AD8375 is supplied in a compact, thermally enhanced, 4 mm × 4 mm, 24-lead LFCSP package and operates over the temperature range of −40°C to +85°C.

Applications
  • Differential ADC drivers
  • High IF sampling receivers
  • Wideband multichannel receivers
  • Instrumentation

Data Sheet, Rev. 0, 8/07

Features and Benefits
  • Bandwidth of 630 MHz (−3 dB)
  • Gain range: −4 dB to +20 dB
  • Step size: 1 dB ± 0.2 dB
  • Differential input and output
  • Noise figure: 8 dB @ maximum gain
  • Output IP3 of ~50 dBm at 200 MHz
  • Output P1dB of 19 dBm at 200 MHz
  • Provides constant SFDR vs. gain
  • Parallel 5-bit control interface
  • Power-down feature
  • Single 5 V supply operation
  • 24-lead, 4 mm × 4 mm LFCSP
  • RF & Microwave
    Data Sheets
    Documentnote
    AD8375: Ultralow Distortion IF VGA Data Sheet (Rev. A)PDF 785 kB
    Application Notes
    Documentnote
    AN-1098: Methodology for Narrow-Band Interface Design Between High Performance Differential Driver Amplifiers and ADCs (Rev. 0)PDF 167 kB
    Frequently Asked Questions
    Documentnote
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    AD8375ACPZ-R7 Production24 ld LFCSP (4x4mm w/2.10mm EP)REEL 1500-40 to 85C04.54Y
    AD8375ACPZ-WP Production24 ld LFCSP (4x4mm w/2.10mm EP)REEL 64-40 to 85C5.224.54Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    AD8375-EVALZEvaluation Board99Y
    Reference Materials
    AD8375: Ultralow Distortion IF VGA Data Sheet (Rev A, 10/2012) AD8375
    AD8375: Ultralow Distortion IF VGA Data Sheet (Rev. A) ad8375
    AN-1098: 高性能差分驱动放大器与ADC之间的窄带接口设计方法 (Rev. 0) ad8375
    AN-1098: Methodology for Narrow-Band Interface Design Between High Performance Differential Driver Amplifiers and ADCs (Rev. 0) ad8375
    ug-202:混合信号数字预失真系统板(MSDPD)Platform ad8375
    RF Source Booklet adf9010