AD841 Wideband, Unity-Gain Stable, Fast Settling Op Amp

The AD841 is a member of the Analog Devices, Inc., family of wide bandwidth operational amplifiers. This high speed/high precision family includes the AD842, which is stable at a gain of two or greater and has 100 mA minimum output current drive. These devices are fabricated using Analog Devices’ junction isolated complementary bipolar (CB) process. This process permits a combination of dc precision and wideband ac performance previously unobtainable in a monolithic op amp. In addition to its 40 MHz unity-gain bandwidth product, the AD841 offers extremely fast settling characteristics, typically settling to within 0.01% of final value in 110 ns for a 10 V step.

Unlike many high frequency amplifiers, the AD841 requires no external compensation. It remains stable over its full operating temperature range. It also offers a low quiescent current of 12 mA maximum, a minimum output current drive capability of 50 mA, a low input voltage noise of 15 nV/√Hz, and low input offset voltage of 1 mV maximum.

The 300 V/µs slew rate of the AD841, along with its 40 MHz gain bandwidth, ensures excellent performance in video and pulse amplifier applications. This amplifier is well suited for use in high frequency signal conditioning circuits and wide bandwidth active filters. The extremely rapid settling time of the AD841 makes it the preferred choice for data acquisition applications that require 12-bit accuracy. The AD841 is also appropriate for other applications such as high speed DAC and ADC buffer amplifiers and other wide bandwidth circuitry.

Applications
  • High Speed Signal Conditioning
  • Video and Pulse Amplifiers
  • Data Acquisition Systems
  • Line Drivers
  • Active Filters
  • Audio
  • Available in 14-pin plastic PDIP, 14-pin hermetic CERDIP, and 20-pin LCC packages
  • Chips and MIL-STD-883B parts available
Features and Benefits
  • Unity-Gain Bandwidth: 40 MHz
  • Fast Settling: 110 ns to 0.01%
  • Slew Rate: 300 V/µs
  • Full Power Bandwidth:
    4.7 MHz for 20 V p-p into a 500 Ω load
  • Input Offset Voltage: 1mV max
  • Input Voltage Noise:
    15 nV/√Hz typ
  • Open-loop gain:
    45 V/mV into a 1 kΩ load
  • Output current: 50 mA min
  • Supply current: 12 mA max
  • Amplifiers
    Data Sheets
    Documentnote
    AD841: Wideband, Unity-Gain Stable, Fast Settling Op Amp Data Sheet (Rev. C)PDF 354 kB
    AD841: Military Data Sheet
    Application Notes
    Documentnote
    AN-402: Replacing Output Clamping Op Amps with Input Clamping AmpsPDF 55 kB
    AN-581: Biasing and Decoupling Op Amps in Single Supply Applications (Rev. 0)PDF 166 kB
    AN-417: Fast Rail-to-Rail Operational Amplifiers Ease Design Constraints in Low Voltage High Speed SystemsPDF 228 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    5962-89641012A ProductionLCC:CER LEADLESS CHIP CARROTH 54-55 to 125C54.3449.11N
    AD841JCHIPS ProductionCHIPS OR DIEREEL 10025C00Y
    AD841JNZ Production14 ld PDIPOTH 250 to 70C5.084.32Y
    AD841SCHIPS ProductionCHIPS OR DIEREEL 10025C021.74Y
    AD841SE/883B Production20 ld LCCOTH 54-55 to 125C49.444.45N
    AD841SQ Production14 ld CerDIPOTH 25-55 to 125C19.8316.85N
    AD841SQ/883B Production14 ld CerDIPOTH 25-55 to 125C37.9834.18N
    Reference Materials
    AD841: Wideband, Unity-Gain Stable, Fast Settling Op Amp Data Sheet (Rev. C) ad841
    AD841: Military Data Sheet ad841
    AN-402: Replacing Output Clamping Op Amps with Input Clamping Amps ad829
    AN-581: Biasing and Decoupling Op Amps in Single Supply Applications (Rev. 0) ad829
    AN-417: Fast Rail-to-Rail Operational Amplifiers Ease Design Constraints in Low Voltage High Speed Systems ad829
    AN-402: 以输入箝位放大器取代输出箝位运算放大器 (Rev. 0) ad829
    AN-417: 在低压高速系统中利用快速轨到轨运算放大器减少设计限制 (Rev. 0) ad829
    AN-581: 单电源应用中的偏置和去耦运算放大器 (Rev. 0) ad829
    MT-060: Choosing Between Voltage Feedback and Current Feedback Op Amps ad829
    MT-032:理想的电压反馈型(VFB)运算放大器 ad829
    MT-059: 补偿输入电容对电流电压转换器所用电压反馈和电流反馈型运算放大器的影响 ad9631
    MT-058: 反馈电容对VFB和CFB运算放大器的影响 ad829
    MT-056: 高速电压反馈运算放大器 ad829
    MT-053:运算放大器失真:HD、THD、THD + N、IMD、SFDR、MTPR ad829
    MT-052:运算放大器噪声指数:不要被误导 ad829
    MT-050: 二阶系统的运算放大器总输出噪声计算 ad9631
    MT-049:单极点系统的运算放大器总输出噪声计算 ad829
    MT-048:运算放大器噪声关系:1/f噪声、均方根(RMS)噪声与等效噪声带宽 ad829
    MT-047:运算放大器噪声 ad829
    MT-033:电压反馈型运算放大器的增益和带宽 ad829
    MT-032: Ideal Voltage Feedback (VFB) Op Amp ad829