The AD9520-41 provides a multioutput clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from 1.4 GHz to 1.8 GHz. An external 3.3 V/5 V VCO/VCXO of up to 2.4 GHz can also be used.
The AD9520 serial interface supports both SPI and I2C® ports. An in-package EEPROM can be programmed through the serial interface and store user-defined register setting for power-up and chip reset.
The AD9520 features 12 LVPECL outputs in four groups. Any of the 1.6 GHz LVPECL outputs can be reconfigured as two 250 MHz CMOS outputs.
Each group of outputs has a divider that allows both the divide ratio (from 1 to 32) and phase (coarse delay) to be set.
The AD9520 is available in a 64-lead LFCSP and can be operated from a single 3.3 V supply. The external VCO can have an operating voltage up to 5.5 V. A separate output driver power supply can be from 2.375 V to 3.465 V.
The AD9520 is specified for operation over the standard industrial range of −40°C to +85°C.
1The AD9520 is used throughout this data sheet to refer to all the members of the AD9520 family. However, when AD9520-4 is used, it is referring to that specific member of the AD9520 family.
Features and Benefits | Clock & TimingRF & MicrowaveAD9520-x IBIS Models |
Document | note |
AD9520-4: 12 LVPECL/24 CMOS Output Clock Generator with Integrated 1.6 GHz VCO Data Sheet (Rev. A) | PDF 1621 kB |
Document | note |
AN-0983: Introduction to Zero-Delay Clock Timing Techniques | PDF 162 kB |
Document | note |
Document | note |
Part Number | Package | Packing Qty | Temp Range | Price 100-499 | Price 1000+ | RoHS |
---|---|---|---|---|---|---|
AD9520-4BCPZ Production | 64 ld LFCSP (9x9mm, 6.20mm exposed pad) | OTH 260 | -40 to 85C | 14.88 | 12.65 | Y |
AD9520-4BCPZ-REEL7 Production | 64 ld LFCSP (9x9mm, 6.20mm exposed pad) | REEL 750 | -40 to 85C | 14.88 | 12.65 | Y |
Part Number | Description | Price | RoHS |
---|---|---|---|
AD9520-4/PCBZ | Evaluation Board | 190 | Y |