AD9910 1 GSPS, 14-Bit, 3.3 V CMOS Direct Digital Synthesizer

The AD9910 is controlled by programming its internal control registers via a serial I/O port. The AD9910 includes an integrated static RAM to support various combinations of frequency, phase, and/or amplitude modulation. The AD9910 also supports a user defined, digitally controlled, digital ramp mode of operation. In this mode, the frequency, phase, or amplitude can be varied linearly over time. For more advanced modulation functions, a high speed parallel data input port is included to enable direct frequency, phase, amplitude, or polar modulation. The AD9910 is specified to operate over the extended industrial temperature range (see the Absolute Maximum Ratings section for details). Applications Agile local oscillator (LO) frequency synthesis Programmable clock generators FM chirp source for radar and scanning systems Test and measurement equipment Acousto-optic device drivers Polar modulators Fast frequency hopping

The AD9910 is a direct digital synthesizer (DDS) featuring an integrated 14-bit DAC and supporting sample rates up to 1 GSPS. The AD9910 employs an advanced, proprietary DDS technology that provides a significant reduction in power con- sumption without sacrificing performance. The DDS/DAC combination forms a digitally programmable, high frequency, analog output synthesizer capable of generating a frequency agile sinusoidal waveform at frequencies up to 400 MHz.

The user has access to the three signal control parameters that control the DDS: frequency, phase, and amplitude. The DDS provides fast frequency hopping and frequency tuning resolu- tion with its 32-bit accumulator. With a 1 GSPS sample rate, the tuning resolution is ~0.23 Hz. The DDS also enables fast phase and amplitude switching capability.

The AD9910 is controlled by programming its internal control registers via a serial I/O port. The AD9910 includes an integrated static RAM to support various combinations of frequency, phase, and/or amplitude modulation. The AD9910 also supports a user defined, digitally controlled, digital ramp mode of operation. In this mode, the frequency, phase, or amplitude can be varied linearly over time. For more advanced modulation functions, a high speed parallel data input port is included to enable direct frequency, phase, amplitude, or polar modulation.

The AD9910 is specified to operate over the extended industrial temperature range (see the Absolute Maximum Ratings section for details).

Applications

Features and Benefits
  • 1 GSPS internal clock speed (up to 400 MHz analog output)
  • Integrated 1 GSPS, 14-bit DAC
  • 0.23 Hz or better frequency resolution
  • Phase noise ≤ −125 dBc/Hz @ 1 kHz offset (400 MHz carrier)
  • Excellent dynamic performance with >80 dB narrow-band SFDR
  • Serial input/output (I/O) control
  • Automatic linear or arbitrary frequency, phase, and amplitude sweep capability
  • See Data Sheet for Additional Information
RF & Microwave
AD9910 IBIS Model
Data Sheets
Documentnote
AD9910: 1 GSPS, 14-Bit, 3.3 V CMOS Direct Digital Synthesizer Datasheet (Rev. D)PDF 839 kB
Application Notes
Documentnote
AN-1389: Recommended Rework Procedure for the Lead Frame Chip Scale Package (LFCSP) (Rev. 0)PDF 133.7 K
AN-769: Generating Multiple Clock Outputs from the AD9540 (Rev. 0)PDF 0
AN-939: Super-Nyquist Operation of the AD9912 Yields a High RF Output Signal (Rev. 0)PDF 221 kB
AN-837: DDS-Based Clock Jitter Performance vs. DAC Reconstruction Filter Performance (Rev. 0)PDF 313 kB
AN-621: Programming the AD9832/AD9835PDF 202 kB
AN-557: An Experimenter's Project: (Rev. 0)PDF 368 kB
AN-419: A Discrete, Low Phase Noise, 125 MHz Crystal Oscillator for the AD9850PDF 101 kB
AN-237: Choosing DACs for Direct Digital SynthesisPDF 1156 kB
AN-423: Amplitude Modulation of the AD9850 Direct Digital SynthesizerPDF 37 kB
AN-345: Grounding for Low-and-High-Frequency CircuitsPDF 455 kB
AN-342: Analog Signal-Handling for High Speed and AccuracyPDF 468 kB
AN-823: Direct Digital Synthesizers in Clocking Applications Time (Rev. 0)PDF 115 kB
AN-280: Mixed Signal Circuit TechnologiesPDF 2101 kB
AN-605: Synchronizing Multiple AD9852 DDS-Based Synthesizers (Rev. 0)PDF 527 kB
AN-927: Determining if a Spur is Related to the DDS/DAC or to Some Other Source (For Example, Switching Supplies) (Rev. 0)PDF 170 kB
AN-587: Synchronizing Multiple AD9850/AD9851 DDS-Based Synthesizers (Rev. 0)PDF 116 kB
AN-953: Direct Digital Synthesis (DDS) with a Programmable Modulus (Rev. B)PDF 112 kB
AN-843: Measuring a Loudspeaker Impedance Profile Using the AD5933 (Rev. A)PDF 284 kB
AN-772: A Design and Manufacturing Guide for the Lead Frame Chip Scale Package (LFCSP) (Rev. 0)PDF 439 kB
AN-851: A WiMax Double Downconversion IF Sampling Receiver Design (Rev. 0)PDF 262 kB
AN-847: Measuring a Grounded Impedance Profile Using the AD5933 (Rev. A)PDF 294 kB
AN-632: Provisionary Data Rates Using the AD9951 DDS as an Agile Reference Clock for the ADN2812 Continuous-Rate CDR (Rev. 0)PDF 138 kB
AN-543: High Quality, All-Digital RF Frequency Modulation Generation with the ADSP-2181 and the AD9850 DDS
AN-543 - Monaural FM Transmitter AN-543 - Stereo FM Transmitter
PDF 49.25 K
User Guides
Documentnote
UG-207: Evaluation Board User Guide for AD9910PDF 956 kB
Product Highlight
Documentnote
Introducing Digital Up/Down Converters: VersaCOMM™ Reconfigurable Digital ConvertersPDF 63 kB
Technical Books
Documentnote
Frequently Asked Questions
Documentnote
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
AD9910BSVZ Production100 ld TQFP w/ 5mm exposed padOTH 90-40 to 85C41.5635.33Y
AD9910BSVZ-REEL Production100 ld TQFP w/ 5mm exposed padREEL 1000-40 to 85C035.33Y
Evaluation Boards
Part NumberDescriptionPriceRoHS
AD9910/PCBZEvaluation Board500Y
Reference Materials
AD9910: 1 GSPS, 14-Bit, 3.3 V CMOS Direct Digital Synthesizer Datasheet (Rev. D) ad9910
AD9910 ad9910
AN-1389: 引线框芯片级封装(LFCSP)的建议返修程序 (Rev. 0) ad9540
AN-1389: Recommended Rework Procedure for the Lead Frame Chip Scale Package (LFCSP) (Rev. 0) ad9856
AN-769: Generating Multiple Clock Outputs from the AD9540 (Rev. 0) ad9540
AN-939: Super-Nyquist Operation of the AD9912 Yields a High RF Output Signal (Rev. 0) ad9540
AN-837: DDS-Based Clock Jitter Performance vs. DAC Reconstruction Filter Performance (Rev. 0) ad9856
AN-621: Programming the AD9832/AD9835 ad9540
AN-557: An Experimenter's Project: (Rev. 0) ad9540
AN-419: A Discrete, Low Phase Noise, 125 MHz Crystal Oscillator for the AD9850 ad9540
AN-237: Choosing DACs for Direct Digital Synthesis ad9856
AN-423: Amplitude Modulation of the AD9850 Direct Digital Synthesizer ad9540
AN-345: Grounding for Low-and-High-Frequency Circuits ad9220
AN-342: Analog Signal-Handling for High Speed and Accuracy ad1674
AN-823: Direct Digital Synthesizers in Clocking Applications Time (Rev. 0) ad9856
AN-280: Mixed Signal Circuit Technologies ad1674
AN-605: Synchronizing Multiple AD9852 DDS-Based Synthesizers (Rev. 0) ad9540
AN-927: Determining if a Spur is Related to the DDS/DAC or to Some Other Source (For Example, Switching Supplies) (Rev. 0) ad9540
AN-587: Synchronizing Multiple AD9850/AD9851 DDS-Based Synthesizers (Rev. 0) ad9540
AN-772: 引脚架构芯片级封装(LFCSP)设计与制造指南 (Rev. 0) ad9540
AN-769: 基于AD9540产生多时钟输出 (Rev. 0) ad9540
AN-237: 放大器直接数字频率合成的DAC选型器应用漫谈 (Rev. 0) ad9540
AN-953: 具可编程模数的直接数字频率合成器(DDS) (Rev. 0) ad9540
AN-605: 同步多个基于DDS的频率合成器AD9852 (Rev. A) ad9540
AN-953: Direct Digital Synthesis (DDS) with a Programmable Modulus (Rev. B) ad9540
AN-939: 利用AD9912的超奈奎斯特频率操作得到高RF输出信号 (Rev. 0) ad9540
AN-927: 确定杂散来源是DDS/DAC还是其他器件(例如开关电源)[中文版] (Rev. 0) ad9540
AN-843: 用AD5933测量扬声器阻抗特性 (Rev. A) ad9830
AN-843: Measuring a Loudspeaker Impedance Profile Using the AD5933 (Rev. A) ad9830
AN-837: 基于DDS的时钟抖动性能与DAC重构滤波器性能的关系[中文版] (Rev. 0) ad9540
AN-772: A Design and Manufacturing Guide for the Lead Frame Chip Scale Package (LFCSP) (Rev. 0) ad9856
AN-823: 时钟应用中的直接数字频率合成器[中文版] (Rev. 0) ad9540
AN-851: 一种WiMax双下变频IF采样接收机设计方案[中文版] (Rev. 0) ad9540
AN-851: A WiMax Double Downconversion IF Sampling Receiver Design (Rev. 0) ad9856
AN-847: 用AD5933测量接地阻抗特性 (Rev. A) ad9856
AN-847: Measuring a Grounded Impedance Profile Using the AD5933 (Rev. A) ad9856
AN-345: 低频和高频电路接地 ad9540
AN-632: 利用AD9951 DDS作为ADN2812连续速率CDR的捷变参考时钟以提供数据速率 (Rev. 0) ad9540
AN-632: Provisionary Data Rates Using the AD9951 DDS as an Agile Reference Clock for the ADN2812 Continuous-Rate CDR (Rev. 0) ad9540
AN-621: AD9832/AD9835的编程 (Rev. 0) ad9540
AN-342: 高速、高精度处理模拟信号[中文版] (Rev. 0) ad9540
AN-557: 实验者项目: (Rev. 0) ad9540
AN-419: 用于完整的直接数字频率合成器AD9850的分立、低相位噪声、125MH晶振 (Rev. A) ad9540
AN-423: 直接数字频率合成器AD9850的幅度调制 (Rev. A) ad9540
AN-587: 同步多个基于DDS的频率合成器AD9850/AD9851 (Rev. 0) ad9540
AN-543: 利用ADSP-2181 DSP和AD9850直接数字频率合成器产生高质量、全数字RF频率调制 (Rev. A) ad9540
AN-543 - Monaural FM Transmitter ad9540
AN-543: High Quality, All-Digital RF Frequency Modulation Generation with the ADSP-2181 and the AD9850 DDS ad9540
AN-543 - Monaural FM Transmitter ad9540
UG-207: Evaluation Board User Guide for AD9910 ad9910
Introducing Digital Up/Down Converters: VersaCOMM™ Reconfigurable Digital Converters ad9856
RF Source Booklet adf9010
CN-0121: Synchronizing Multiple AD9910 1 GSPS Direct Digital Synthesizers adclk846
CN-0109: Low Jitter Sampling Clock Generator for High Performance ADCs Using... ad9512
Basics of Designing a Digital Radio Receiver (Radio 101) ad9856
Digital Up/Down Converters: VersaCOMM™ White Paper ad9856