ADA4932-1 Low Power Differential ADC Driver _ BDTIC a Leading Distributor in China

ADA4932-1 Low Power Differential ADC Driver

The ADA4932-1 / ADA4932-2 are the next generation AD8132 with higher performance and lower noise and power consumption. They are an ideal choice for driving high performance ADCs as a single-ended-to-differential or differential-to-differential amplifier. The output common-mode voltage is user adjustable by means of an internal common-mode feedback loop, allowing the ADA4932-1 / ADA4932-2 output to match the input of the ADC. The internal feedback loop also provides exceptional output balance as well as suppression of even-order harmonic distortion products.

With the ADA4932-1 / ADA4932-2, differential gain configurations are easily realized with a simple external four-resistor feedback network that determines the closed-loop gain of the amplifier.

The ADA4932-1 / ADA4932-2 were fabricated using the Analog Devices, Inc., proprietary silicon-germanium (SiGe) complementary bipolar process, enabling it to achieve low levels of distortion and noise at low power consumption.

The low offset and excellent dynamic performance of the ADA4932-1/ADA4932-2 make them well suited for a wide variety of data acquisition and signal processing applications.

The ADA4932-1 is available in a 16-lead LFCSP, and the ADA4932-2 is available in a 24-lead LFCSP. The pinouts are optimized to facilitate the printed circuit board (PCB) layout and minimize distortion. The ADA4932-1/ADA4932-2 are specified to operate over the −40°C to +105°C temperature range; both operate on supplies between +3 V and ±5 V.

Applications

Features and Benefits

High performance at low power

High speed

−3 dB bandwidth of 560 MHz, G = 1
0.1 dB gain flatness to 300 MHz
Slew rate: 2800 V/μs, 25% to 75%
Fast 0.1% settling time of 9 ns

−3 dB bandwidth of 560 MHz, G = 1

0.1 dB gain flatness to 300 MHz

Slew rate: 2800 V/μs, 25% to 75%

Fast 0.1% settling time of 9 ns

Low power: 9.6 mA per amplifier

Low harmonic distortion

100 dB SFDR at 10 MHz
90 dB SFDR at 20 MHz

100 dB SFDR at 10 MHz

90 dB SFDR at 20 MHz

Low input voltage noise: 3.6 nV/√Hz

±0.5 mV typical input offset voltage

Externally adjustable gain

Can be used with gains less than 1

Differential-to-differential or single-ended-to-differential operation

Adjustable output common-mode voltage

See data sheet for additional features

Amplifiers

Aerospace and Defense

Solutions

SPICE Models

ADA4932 SPICE Macro Model .CIR

Data Sheets

Document	note
ADA4932-1/ADA4932-2: Low Power Differential ADC Driver Data Sheet (Rev. E)	PDF 746.44 K

Application Notes

Document	note
AN-1363: Meeting Biasing Requirements of Externally Biased RF/Microwave Amplifiers with Active Bias Controllers (Rev. 0)	PDF 804.11 K
AN-282: Fundamentals of Sampled Data Systems	PDF 2131 kB
AN-0992: Active Filter Evaluation Board for Differential Amplifiers (Rev. 0)	PDF 85 kB
AN-1026: High Speed Differential ADC Driver Design Considerations (Rev. A)	PDF 355 kB
AN-649: Using the Analog Devices Active Filter Design Tool (Rev. 0)	PDF 5.3 M

User Guides

Document	note
UG-889: Evaluation Board for Single Differential Amplifiers Offered in 16-Lead LFCSP Packages (Rev. A)	PDF 200.15 K

Order Information

Part Number	Package	Packing Qty	Temp Range	Price 100-499	Price 1000+	RoHS
ADA4932-1YCPZ-R2 Production	16 ld LFCSP (3x3mm, 1.3mm exposed pad)	REEL 250	-40 to 105C	3.67	3.67	Y
ADA4932-1YCPZ-R7 Production	16 ld LFCSP (3x3mm, 1.3mm exposed pad)	REEL 1500	-40 to 105C	0	2.95	Y
ADA4932-1YCPZ-RL Production	16 ld LFCSP (3x3mm, 1.3mm exposed pad)	REEL 5000	-40 to 105C	0	2.95	Y

Evaluation Boards

Part Number	Description	Price	RoHS
EVAL-FDA-1CPZ-16	Evaluation Bare Board for 16 Lead LFCSP	18.25	Y
EVAL-FDA-1RMZ-8	Evaluation Bare Board for 8 Lead MSOP	18.25	Y
EVAL-FDA-1RZ-8	Evaluation Bare Board for 8 Lead SOIC	18.25	Y
FDA-FILTER-CPZ	Evaluation Board Filter for LFCSP	18.25	Y