ADATE304 200 MHz Dual Integrated DCL with Level Setting DACs, Per Pin PMU, and Per Chip VHH

The ADATE304 is a complete, single-chip solution that performs the pin electronic functions of the driver, the comparator, and the active load (DCL), per pin PMU, and dc levels for ATE applications. The device also contains an HVOUT driver with a VHH buffer capable of generating up to 13.5 V. Automatic test equipment Semiconductor test systems Board test systems Instrumentation and characterization equipment

The driver features three active states: data high mode, data low mode, and term mode, as well as an inhibit state. The inhibit state, in conjunction with the integrated dynamic clamp, facili-tates the implementation of a high speed active termination. The ADATE304 supports two output voltage ranges: −2.0 V to +6.0 V and −1.25 V to +6.75 V by adjusting the positive and negative supply voltages.

Each channel of the ADATE304 features a high speed window comparator per pin for functional testing, as well as a per pin PMU with FV, or FI and MV, or MI functions. All necessary dc levels for DCL functions are generated by on-chip 14-bit DACs. The per pin PMU features an on-chip 16-bit DAC for high accuracy and contains integrated range resistors to minimize external component counts.

The ADATE304 uses a serial bus to program all functional blocks and has an on-board temperature sensor for monitoring the device temperature.

Data Sheet, Rev. 0, 10/08

Features and Benefits
  • Driver
    3 level driver with high-Z mode and built-in clamps
    Precision trimmed output resistance
    Low leakage mode (typically <10 nA)
    Voltage range: −2.0 V to +6.0 V
    2.4 ns minimum pulse width, 2 V terminated
  • Comparator
    Window and differential comparator
    500 MHz input equivalent bandwidth
  • Load
    ±12 mA maximum current capability
  • Per pin PMU
    Force voltage range: −2.0 V to +6.0 V
    5 current ranges: 32 mA, 2 mA, 200 µA, 20 µA, 2 µA
  • Levels
    14-bit DAC for DCL levels
    Typically < ±5 mV INL (calibrated)
    16-bit DAC for PMU levels
    Typically < ±1.5 mV INL (calibrated) linearity in FV mode
  • HVOUT output buffer
    0 V to 13.5 V output range
  • 84-ball, 9 mm × 9 mm, flip-chip BGA package
  • 900 mW per channel with no load
  • Application Specific
    Data Sheets
    Documentnote
    ADATE304: 200 MHz Dual Integrated DCL with Differential Drive/Receive, Level Setting DACs and per pin PMU Data Sheet (Rev. 0)PDF 93 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADATE304BBCZ ProductionCHIP SCALE BGAOTH 260-40 to 85C43.5337Y
    ADATE304: 200 MHz Dual Integrated DCL with Differential Drive/Receive, Level Setting DACs and per pin PMU Data Sheet (Rev. 0) adate304