ADL5567 4.3 GHz, Ultrahigh Dynamic Range, Dual Differential Amplifier

The ADL5567 is a high performance, dual differential amplifier optimized for intermediate frequencies (IF) and dc applications. The amplifier offers a low noise of 1.29 nV/√Hz and excellent distortion performance over a wide frequency range, making it an ideal driver for high speed 16-bit analog-to-digital converters (ADCs). The ADL5567 is ideally suited for use in high performance zero-IF and complex IF receiver designs. In addition, this device has excellent low distortion for single-ended input driver applications.

The ADL5567 provides a gain of 20 dB. For the single-ended input configuration, the gain is reduced to 18 dB. Using two external series resistors for each amplifier expands the gain flexibility of the amplifier and allows for any gain selection from 0 dB to 20 dB for a differential input and 0 dB to 18 dB for a single-ended input. In addition, this device maintains low distortion down to output common-mode levels of 1.25 V, and therefore providing an added capability for driving CMOS ADCs at ac levels up to 2 V p-p.

The quiescent current of the ADL5567 using a 5 V supply is typically 74 mA per amplifier in high performance mode. When disabled, each amplifier consumes only 3.5 mA, and has 58 dB input to output isolation at 100 MHz.

The device is optimized for wideband, low distortion, and low noise operation, giving it unprecedented performance for overall spurious-free dynamic range (SFDR). These attributes, together with its adjustable gain capability, make this device the amplifier of choice for driving a wide variety of ADCs, mixers, pin diode attenuators, SAW filters, and multielement discrete devices.

Fabricated on an Analog Devices, Inc., high speed silicon germanium (SiGe) process, the ADL5567 is supplied in a compact 4 mm × 4 mm, 24-lead LFCSP package and operates over the −40°C to +85°C temperature.

Applications

Features and Benefits

−3 dB bandwidth of 4.3 GHz

High performance (HP), low power (LP), and power down modes

Preset 20 dB gain can be reduced by adding external resistors

Channel to channel gain error: 0.04 dB at 500 MHz

Channel to channel phase error: 0.6° at 500 MHz

Differential or single-ended input to differential output

Internally dc-coupled inputs and outputs

Low noise input stage: 7.4 dB noise figure at 500 MHz

Low broadband distortion for supply = 5 V, HPmode, and 2 Vp-p

200 MHz: −94 dBc (HD2), −103 dBc (HD3)
500 MHz: −82 dBc (HD2), −82 dBc (HD3)

200 MHz: −94 dBc (HD2), −103 dBc (HD3)

500 MHz: −82 dBc (HD2), −82 dBc (HD3)

IMD3 of −104 dBc at 200 MHz and −90 dBc at 500 MHz

See data sheet for additional features

RF & Microwave

Fully Differential Amplifiers

Data Sheets

Document	note
ADL5567: 4.3 GHz, Ultrahigh Dynamic Range, Dual Differential Amplifier Data Sheet (Rev. 0)	PDF 744.49 K

Order Information

Part Number	Package	Packing Qty	Temp Range	Price 100-499	Price 1000+	RoHS
ADL5567ACPZN-R2 Obsolete	LFCSP:LEADFRM CHIP SCALE	REEL 250	-40 to 125C	0	0	Y
ADL5567ACPZN-R7 Production	LFCSP:LEADFRM CHIP SCALE	REEL 1500	-40 to 85C	0	13.75	Y

Evaluation Boards

Part Number	Description	Price	RoHS
AD-FMCADC7-EBZ	Evaluation Board	-1	Y
ADL5567-EVALZ	Evaluation Board	-1	Y

Reference Materials

Technical Articles：Designing High Speed Analog Signal Chains from DC to Wideband

ADL5567: 4.3 GHz, Ultrahigh Dynamic Range, Dual Differential Amplifier Data Sheet (Rev. 0) adl5567

Designing High Speed Analog Signal Chains from DC to Wideband adl5567