ADM1073 -48 V Full Feature Hot Swap Controller

The ADM1073 is a full-feature, negative voltage, hot swap controller that allows boards to be safely inserted and removed from a live −48 V backplane. The part provides precise and robust current limiting, and protection against both transient and nontransient short circuits in overvoltage and undervoltage conditions. The ADM1073 can operate from a negative voltage of −18 V to −80 V and can tolerate transient voltages of up to −200 V.

Inrush current is limited to a programmable value by control-ling the gate drive of an external N-channel FET. The maximum current limit is set by the choice of the sense resistor, RSENSE.

A built-in soft start function allows control of the inrush current profile by an external capacitor on the soft start (SS) pin.

An external capacitor on the TIMER pin determines the time for which the FET gate is controlled to be high when maximum inrush current flows. The ADM1073 employs a limited consec-utive retry scheme, whereby, if the load capacitance is not fully charged within one attempt, the FET gate is pulled low and retries after a cooling period.

Features and Benefits
  • Precision In-Rush Linear Current Limit
  • Adjustable Soft Start In-Rush Current Limit Profiling
  • Precision Maximum On Time in Current Limit
  • Max On-Time Modulated by FET Drain Voltage for Additional SOA Protection
  • Adjustable PWM Retry Scheme and Multiple Device Cascading
  • Capability for Charging Large Capacitive Loads
  • Shunt Regulator Topology Allows For Very Large Transient Input Supplies
  • Precision UnderVoltage and OverVoltage Monitors with Separate UV and OV Pins and Programmable UV and OV Hysteresis
Power Management
Data Sheets
Documentnote
ADM1073: Full Feature-48 V Hot Swap Controller Data Sheet (Rev. B)PDF 309 kB
Application Notes
Documentnote
AN-805: Altering the ADM1073 Current Limit Level (Rev. 0)PDF 141 kB
AN-694: Hot Swap and Blocking FET Control Using 2 x ADM1073 Hot Swap ControllersPDF 105 kB
User Guides
Documentnote
UG-555: Using the ADM1073 Hot Swap Controller Evaluation KitPDF 219 kB
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
ADM1073ARUZ Production14 ld TSSOPOTH 96-40 to 85C2.282.13Y
ADM1073ARUZ-REEL Production14 ld TSSOPREEL 2500-40 to 85C02.13Y
ADM1073ARUZ-REEL7 Production14 ld TSSOPREEL 1000-40 to 85C02.13Y
Evaluation Boards
Part NumberDescriptionPriceRoHS
EVAL-ADM1073MEBZEvaluation Board44.53Y
Reference Materials
ADM1073: Full Feature-48 V Hot Swap Controller Data Sheet (Rev. B) adm1073
AN-805: 更改ADM1073的电流限值 (Rev. 0) adm1073
AN-805: Altering the ADM1073 Current Limit Level (Rev. 0) adm1073
AN-694: 利用2个ADM1073热插拔控制器进行热插拔和阻断FET控制 (Rev. A) adm1073
AN-694: Hot Swap and Blocking FET Control Using 2 x ADM1073 Hot Swap Controllers adm1073
UG-555: Using the ADM1073 Hot Swap Controller Evaluation Kit adm1073
ADM1073评估套件 adm1073
Hot Swap And Power Monitoring Bulletin adm1175
电源逆变器应用中隔离架构、电路和元件的选择 adp5040