ADP1653 Compact, High Efficiency, High Power, Flash/Torch LED Driver with Dual Interface

The ADP1653 is a very compact, high efficiency, high power, camera flash LED driver optimized for cellular phones. The high efficiency and dynamic LED current control of the device improve flash brightness and picture quality in dimly lit environments. Efficiency peaks at 92% and is higher than charge pump solutions over the Li-Ion battery range. Camera-enabled cellular phones, smart phones Digital still cameras, camcorders, PDAs

The device has a dual-mode interface that is configurable to 2-bit logic or an I2C® interface. The indicator and high power LED currents are programmable with external resistors or through the I2C interface. To maximize overall flash brightness, the ADP1653 offers an input to reduce flash LED current in less than 50 μs, referred to as the Tx mask. Tx masking reduces battery stress by scaling back flash LED current during an RF transmission.

The ADP1653 solution requires only four external components in I2C mode and fits in a 6.4 mm × 7.2 mm space. The part integrates multiple safety features such as soft start, flash timeout, output current limit, thermal protection, and overvoltage protection.

The ADP1653 operates over the −40°C to +125°C junction temperature range.

Data Sheet, Rev. B, 9/07

Features and Benefits
  • Small 6.4 mm × 7.2 mm solution
  • 2.2 μH power inductor
  • 92% peak efficiency
  • Tx masking within 50 μs
  • 2.1 A, 12 V power switch
  • Pin-selectable interface: 2-bit logic or I2C
  • Programmable flash and torch current
    Up to 200 mA in torch mode
    Up to 500 mA in flash mode
  • Programmable indicator LED current up to 20 mA
  • Programmable timer register: up to 820 ms flash timeout
  • 2.75 V to 5.5 V input voltage range
  • Low noise, 1.2 MHz PWM operation
  • Safety features
    Interrupt output pin
    Fault condition register Short-circuit protection
    Output overvoltage protection
    Thermal overload protection
    Integrated current limit and soft start
  • Power Management
    Data Sheets
    Documentnote
    ADP1653: Compact, High Efficiency, High Power, Flash/Torch LED Driver with Dual Interface Data Sheet (Rev. B)PDF 972.9 K
    Application Notes
    Documentnote
    AN-861: ADP1653 Evaluation and Test Methods (Rev. 0)PDF 937 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADP1653ACPZ-R7 Production16 ld LFCSP (3x3mm, 1.50mm exposed pad)REEL 1500-40 to 125C01.45Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    ADP1653-EVALZEvaluation Board-1Y
    ADP1653:小尺寸、高效率、大功率、闪光灯 / 手电筒模式 LED 驱动器,双模式接口 (Rev. B) adp1653
    ADP1653: Compact, High Efficiency, High Power, Flash/Torch LED Driver with Dual Interface Data Sheet (Rev. B) adp1653
    AN-861: ADP1653 Evaluation and Test Methods (Rev. 0) adp1653