ADP1761 1 A, Low VIN, Low Noise, CMOS Linear Regulator

The ADP1761 is a low noise, low dropout (LDO) linear regulator. It is designed to operate from a single input supply with an input voltage as low as 1.10 V, without the requirement of an external bias supply to increase efficiency and provide up to 1 A of output current.

The low 30 mV typical dropout voltage at a 1 A load allows the ADP1761 to operate with a small headroom while maintaining regulation and providing better efficiency.

The ADP1761 is optimized for stable operation with small 10 μF ceramic output capacitors. The ADP1761 delivers optimal transient performance with minimal board area.

The ADP1761 is available in fixed output voltages ranging from 0.9 V to 1.5 V. The output of the adjustable output model can be set from 0.5 V to 1.5 V through an external resistor connected between VADJ and ground.

The ADP1761 has an externally programmable soft start time by connecting a capacitor to the SS pin. Short-circuit and thermal overload protection circuits prevent damage in adverse conditions. The ADP1761 is available in a small 16-lead LFCSP package for the smallest footprint solution to meet a variety of applications.

Applications
  • Regulation to noise sensitive applications such as radio frequency (RF) transceivers, analog-to-digital converter (ADC) and digital-to-analog converter (DAC) circuits, phase-locked loops (PLLs), voltage controlled oscillators (VCOs) and clocking integrated circuits
  • Field-programmable gate array (FPGA) and digital signal processor (DSP) supplies
  • Medical and healthcare
  • Industrial and instrumentation
Features and Benefits
  • 1 A maximum output current
  • Low input voltage supply range
    • VIN = 1.10 V to 1.98 V, no external bias supply required
  • VIN = 1.10 V to 1.98 V, no external bias supply required
  • Fixed output voltage range: VOUT_FIXED = 0.9 V to 1.5 V
  • Adjustable output voltage range: VOUT_ADJ = 0.5 V to 1.5 V
  • Ultralow noise: 2 μV rms, 100 Hz to 100 kHz
  • Noise spectral density
    • 4 nV/√Hz at 10 kHz
    • 3 nV/√Hz at 100 kHz
  • 4 nV/√Hz at 10 kHz
  • 3 nV/√Hz at 100 kHz
  • Low dropout voltage: 30 mV typical at 1 A load
  • Operating supply current: 4.5 mA typical at no load
  • ±1.5% fixed output voltage accuracy over line, load, and temperature
  • Excellent power supply rejection ratio (PSRR) performance
    • 67 dB typical at 10 kHz at 1 A load
    • 51 dB typical at 100 kHz at 1 A load
  • 67 dB typical at 10 kHz at 1 A load
  • 51 dB typical at 100 kHz at 1 A load
  • Excellent load/line transient response
  • Soft start to reduce inrush current
  • Optimized for small 10 μF ceramic capacitors
  • Current-limit and thermal overload protection
  • Power-good indicator
  • Precision enable
  • 16-lead, 3 mm × 3 mm LFCSP package
  • Power Management
    Design Tools
    Data Sheets
    Documentnote
    ADP1761: 1 A, Low VIN, Low Noise, CMOS Linear Regulator Data Sheet (Rev. A)PDF 857.46 K
    User Guides
    Documentnote
    UG-954: Evaluating the ADP1761/ADP1762/ADP1763 Low VIN, Low Noise, CMOS Linear Regulators (Rev. 0)PDF 478.97 K
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADP1761ACPZ-0.9-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    ADP1761ACPZ-1.0-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    ADP1761ACPZ-1.1-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    ADP1761ACPZ-1.2-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    ADP1761ACPZ-1.3-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    ADP1761ACPZ-1.5-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    ADP1761ACPZ-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    ADP1761ACPZ0.95-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    ADP1761ACPZ1.25-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 125C3.693.09Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    ADP1761-1.3-EVALZFixed 1.3V, ADP1761 Evaluation Board49Y
    ADP1761-ADJ-EVALZAdjustable, set to 1.1V, ADP1761 Evaluation Board49Y
    ADP1762-1.3-EVALZFixed 1.3V, ADP1762 Evaluation Board49Y
    ADP1762-ADJ-EVALZAdjustable, set to 1.1V, ADP1762 Evaluation Board49Y
    ADP1763-1.3-EVALZFixed 1.3V, ADP1763 Evaluation Board49Y
    ADP1763-ADJ-EVALZAdjustable, set to 1.1V, ADP1763 Evaluation Board49Y
    ADP1761: 1 A, Low VIN, Low Noise, CMOS Linear Regulator Data Sheet (Rev. A) adp1761
    ADI Linear Regulator Design Tool and Parametric Search adp2108
    UG-954: Evaluating the ADP1761/ADP1762/ADP1763 Low VIN, Low Noise, CMOS Linear Regulators (Rev. 0) adp1761