ADRF6516 31 MHz, Dual Programmable Filters and Variable Gain Amplifiers

The ADRF6516 is a matched pair of fully differential, low noise and low distortion programmable filters and variable gain amplifiers (VGAs). Each channel is capable of rejecting large out-of-band interferers while reliably boosting the desired signal, thus reducing the bandwidth and resolution requirements on the analog-to-digital converters (ADCs). The excellent matching between channels and their high spurious-free dynamic range over all gain and bandwidth settings make the ADRF6516 ideal for quadrature-based (IQ) communication systems with dense constellations, multiple carriers, and nearby interferers.

The filters provide a six-pole Butterworth response with 1 dB corner frequencies programmable through the SPI port from 1 MHz to 31 MHz in 1 MHz steps. The preamplifier that precedes the filters offers a SPI-programmable option of either 3 dB or 6 dB of gain. The preamplifier sets a differential input impedance of 1600 Ω and has a common-mode voltage that defaults to VPS/2 but can be driven from 1.1 V to 1.8 V.

The variable gain amplifiers that follow the filters provide 50 dB of continuous gain control with a slope of 15.5 mV/dB. Their maximum gains can be programmed to various values through the SPI. The output buffers provide a differential output impedance of 30 Ω and are capable of driving 2 V p-p into 1 kΩ loads. The output common-mode voltage defaults to VPS/2, but it can be adjusted down to 700 mV by driving the high impedance VOCM pin. Independent, built-in dc offset compensation loops can be disabled if fully dc-coupled operation is desired. The high-pass corner frequency is defined by external capacitors on the OFS1 and OFS2 pins and the VGA gain.

The ADRF6516 operates from a 3.15 V to 3.45 V supply and consumes a maximum supply current of 360 mA when programmed to the highest bandwidth setting. When disabled, it consumes <9 mA. The ADRF6516 is fabricated in an advanced silicon-germanium BiCMOS process and is available in a 32-lead, exposed paddle LFCSP. Performance is specified over the −40°C to +85°C temperature range.

Applications

Baseband I/Q receivers
Diversity receivers
ADC drivers
Point-to-point and point-to-multipoint radio
Instrumentation
Medical

Features and Benefits

Matched pair of programmable filters and VGAs

Continuous gain control range: 50 dB

Digital gain control: 15 dB

6-pole Butterworth filter: 1 MHz to 31 MHz in 1 MHz steps, 1 dB corner frequency

Preamplifier and postamplifier gain steps

IMD3: >65 dBc for 1.5 V p-p composite output

HD2, HD3: >65 dBc for 1.5 V p-p output

Differential input and output

Flexible output and input common-mode ranges

Optional dc offset compensation loop

SPI programmable filter corners and gain steps

Power-down feature

Single 3.3 V supply operation

RF & Microwave

Software & Systems Requirements

Data Sheets

Document	note
ADRF6516: 31 MHz, Dual Programmable Filters and Variable Gain Amplifiers Data Sheet (Rev. B)	PDF 1065 kB

Order Information

Part Number	Package	Packing Qty	Temp Range	Price 100-499	Price 1000+	RoHS
ADRF6516ACPZ-R7 Production	32 ld LFCSP (5x5mm)	REEL 1500	-40 to 85C	11.3	10.3	Y

Evaluation Boards

Part Number	Description	Price	RoHS
ADRF6516-EVALZ	Evaluation Board	150	Y

Reference Materials

Product Selection Guide：RF Source Booklet

ADRF6516：31 MHz、双通道可编程滤波器和可变增益放大器 (Rev. B) adrf6516

Windows 7 Drivers for the SPI Software adl5336

ADRF6516 Evaluation Board Software adrf6516

ADRF6516: 31 MHz, Dual Programmable Filters and Variable Gain Amplifiers Data Sheet (Rev. B) adrf6516

RF Source Booklet adf9010