The ADRF6601 is a high dynamic range active mixer with an integrated phase-locked loop (PLL) and a voltage controlled oscillator (VCO). The PLL/synthesizer uses a fractional-N PLL to generate a fLO input to the mixer. The reference input can be divided or multiplied and then applied to the PLL phase frequency detector (PFD).
The PLL can support input reference frequencies from 12 MHz to 160 MHz. The PFD output controls a charge pump whose output drives an off-chip loop filter.
The loop filter output is then applied to an integrated VCO. The VCO output at 2 × fLO is applied to an LO divider, as well as to a programmable PLL divider. The programmable PLL divider is controlled by a sigma-delta (Σ-Δ) modulator (SDM). The modulus of the SDM can be programmed from 1 to 2047.
The active mixer converts the single-ended 50 Ω RF input to a 200 Ω differential IF output. The IF output can operate up to 500 MHz.
The ADRF6601 is fabricated using an advanced silicon-germanium BiCMOS process. It is available in a 40-lead, RoHS-compliant, 6 mm × 6 mm LFCSP with an exposed paddle. Performance is specified over the −40°C to +85°C temperature range.
Features and Benefits
| RF & MicrowaveSoftware & Systems Requirements |
| Document | note |
| ADRF6601: 300 MHz to 2500 MHz Rx Mixer with Integrated Fractional-N PLL and VCO Data Sheet (Rev. B) | PDF 1.41 M |
| Part Number | Package | Packing Qty | Temp Range | Price 100-499 | Price 1000+ | RoHS |
|---|---|---|---|---|---|---|
| ADRF6601ACPZ-R7 Production | 40 ld LFCSP (6x6mm w/4.1mm pad) | REEL 750 | -40 to 85C | 0 | 10.88 | Y |
| Part Number | Description | Price | RoHS |
|---|---|---|---|
| ADRF6601-EVALZ | Evaluation Board | 150 | Y |
