ADSP-21261 3rd Generation, Low-Cost, 150 MHz SHARC Processor
The ADSP-21261 is the lowest cost member of the third-generation of SHARC® programmable digital signal processors. A range of cost-sensitive applications such as voice recognition, medical appliances, measurement devices, high-quality audio, and automotive entertainment systems will benefit from the ADSP-21261’s integration of large on-chip memory and diverse set of peripherals.
The ADSP-21261 is well suited for use in cost sensitive, signal processing applications.
The ADSP-21261 is based on the SHARC (SIMD) core that supports execution of 32-bit fixed-point and 32/40-bit floating-point arithmetic formats. With its core running at 150MHz (6.67 ns instruction cycle time), the ADSP-21261 is capable of executing complex Fast Fourier Transform (FFT) operations—1024-point complex FFT in 61us. The processor’s single-instruction, multiple data (SIMD) mode effectively doubles the processor performance.
The ADSP-21261 offers a high level of integration, including 1 Mbit of on-chip dual-ported SRAM and 3Mbits of mask programmable ROM memory. This large on-chip dual-ported memory enables sustained processor and I/O performance without the need for external memory. System I/O is achieved through four full-duplex serial ports, four timers, a 16-bit parallel port, a serial peripheral interface (SPI), 18 zero-overhead Direct Memory Access (DMA) channels delivering fast data transfers without processor intervention and an innovative Digital Audio Interface (DAI) which provides the user complete software control through its Signal Routing Unit (SRU).
Connections are made using the flexible Signal Routing Unit (SRU), a matrix routing group of pins that provides configurable and flexible connectivity between all DAI components and the SRU. The peripherals connected through the DAI are: a precision clock generator (PCG), an input data port (IDP), four SPORTS (serial ports), six flag inputs, six flag outputs, three timers and the SRU. The IDP provides an additional input path to the DSP core, configurable as 8 channels of receive serial data or as 7 channels of receive serial data and a single channel of up to a 20-bit wide parallel data. This level of integration enables the designer to take full advantage of a wide variety of peripherals without sacrificing the overall system performance.
VisualDSP++ is an integrated software development environment, allowing for fast and easy development, debug, and deployment. The EZ-KIT Lite evaluation system provides an easy way to investigate the power of the ADI family of processors and begin to develop applications. Emulators are available for PCI and USB host platforms for rapid on-chip debugging. Additional development tools and algorithms are available from an extensive third-party development community.
Note: The functional block diagram is available in the data sheet.
Features and Benefits- 150MHz (6.67 ns) SIMD SHARC Core, capable of 900MFLOPS peak performance
- Code compatible with all SHARC Processors
- Supports IEEE-compatible 32-bit floating-point, 40-bit floating-point and 32-bit fixed-point data types
- 1Mbit on-chip dual-ported SRAM; 3Mbits mask-programmable ROM
- 4 independent Serial Ports - Supports: Standard DSP Serial mode, I2S mode, Left Justified Sample pair mode and TDM mode
- 18 Zero-overhead DMA channels
- SPI compatible interface and a 16-bit Parallel Port
- Digital Audio Interface (DAI)
- Software configurable PLL providing many multiplier ratios
- Four timers: 1 core and 3 general purpose timers
- 136-ball BGA (12mm x 12mm) and 144-lead LQFP (20mm x 20mm) packages available in Commercial and Industrial temp ranges
| BSDL Model Files |
Data Sheets
Application Notes
Document | note |
EE-112: Class Implementation in Analog C++ | PDF
31.54 K |
EE-356: Emulator and Evaluation Hardware Troubleshooting Guide for CCES Users (Rev. 2) EE-356: Associated Files | PDF
779.29 K |
EE-357: Static Voltage Scaling for ADSP-2148x SHARC® Processors (Rev. 1) EE-357: Code Example (Rev 1, 03/2013) | PDF
761 kB |
EE-355: Expert In-Circuit FLASH Programmer for SHARC® Processors (Rev. 1) EE-355: Code Example (Rev 1, 08/2012) | PDF
1045 kB |
EE-352: Soldering Considerations for Exposed-Pad Packages (Rev. 1) EE-352: Associated Files | PDF
680 kB |
EE-346: Using the On-Chip Thermal Diode on Analog Devices Processors (Rev. 2) EE-346: Code example (Rev 2, 08/2010) | PDF
203 kB |
EE-243: Using the Expert DAI for SHARC® Processors (Rev. 7) EE-243: Code example (Rev 7, 06/2010) | PDF
337 kB |
EE-349: ADSP-2146x Board Design Guidelines for DDR2 Memory (Rev. 3) EE-349: Schematics (Rev 3, 11/2012) | PDF
1037 kB |
EE-348: Estimating Power for ADSP-214xx SHARC®Processors (Rev. 4) EE-348: Power Calculator (Rev 4, 02/2011) | PDF
135 kB |
EE-345: Boot Kernel Customization and Firmware Upgradeability on SHARC Processors® (Rev. 1) EE-345: Code example (Rev 1, 10/2009) | PDF
331 kB |
EE-332: Cycle Counting and Profiling (Rev. 2) EE-332: Code example | PDF
142 kB |
EE-299: Estimating Power Dissipation for ADSP-21368 SHARC Processors | PDF
188 kB |
EE-322: Expert Code Generator for SHARC® Processors (Rev. 5) EE-322: Code Example (Rev 5, 01/2012) | PDF
742 kB |
EE-340: Connecting SHARC® and Blackfin® Processors over SPI (Rev. 1) EE-340: Code example | PDF
209 kB |
EE-320: Implementing an Ogg Vorbis Decoder on SHARC® Processors (Rev. 1) EE-320: Code example (Rev 1, 06/2008) | PDF
731 kB |
EE-120: Interfacing Assembly Language Programs to C | PDF |
ADSP-21161N SHARC On-chip SDRAM Controller (Rev. EE-163) | PDF |
EE-323: Implementing Dynamically Loaded Software Modules (Rev. 1) EE-323: Associated Code | PDF
0 |
EE-72: Generation Boot EPROMS for the SHARC's EZ-KIT Lite's (ADSP21061 with an ID=001) | PDF
200.37 K |
EE-329: Running FAT16 File Systems and DOS Commands on SHARC® Processors (Rev. 1) EE-329: Code Example (Rev 1, 09/2007) | PDF
868 kB |
EE-330: Windows Vista Compatibility in VisualDSP++ 5.0 Development Tools (Rev. 1) | PDF
276 kB |
EE-266: Programming S/PDIF on ADSP-2136x and ADSP-21371 SHARC® Processors (Rev. 2) EE-266: Code example (Rev 2, 08/2007) | PDF
1147 kB |
EE-231: In-Circuit Programming of an SPI Flash with SHARC® Processors (Rev. 2) EE-231: Code example (Rev 2, 08/2007) | PDF
74 kB |
EE-328: Migrating from ADSP-2106x/2116x to ADSP-2126x/2136x/2137x SHARC® Processors (Rev. 1) | PDF
101 kB |
EE-319: Estimating Power Dissipation for ADSP-21375 SHARC® Processors (Rev. 1) | PDF
131 kB |
EE-318: Estimating Power Dissipation for ADSP-21371 SHARC® Processors (Rev. 1) | PDF
131 kB |
EE-175: Emulator and Evaluation Hardware Troubleshooting Guide for VisualDSP++ Users (Rev. 14) EE-175: Associated Files | PDF
183 kB |
EE-280: In-Circuit Flash Programming on ADSP-2106x SHARC® Processors (Rev. 2) EE-280: Code Example (Rev 2, 03/2007) | PDF
276 kB |
EE-313: Land Pattern Compatibility Between 28x28 MQFP and LQFP Packages (Rev. 1) | PDF
41 kB |
EE-56: Tips and Tricks on SHARC® EPROM and Host Boot Loader (Rev. 3) | PDF
108 kB |
EE-84: External Port DMA Modes of Operation for SHARC Processors (Rev. 2) EE-084: Code Example (Rev 2, 2/2007) | PDF
99.1 K |
EE-223b: In-Circuit Flash Programming on SHARC® Processors (Rev. 2) EE-223: Code Example (Rev 2, 02/2007) | PDF
258 kB |
EE-253: Power Bypass Decoupling of SHARC® Processors (Rev. 1) | PDF
354 kB |
EE-296: Using the UART Port Controller on SHARC® Processors (Rev. 2) | PDF
114 kB |
EE-295: Implementing Delay Lines on SHARC® Processors (Rev. 1) EE-295: Code Example (Rev 1, 10/2006) | PDF
0 kB |
EE-305: Designing and Debugging Systems with SHARC Processors (Rev. 1) | PDF
151 kB |
EE-303: Using VisualDSP++® Thread-Safe Libraries with a Third-Party RTOS (Rev. 1) | PDF
56 kB |
EE-290: Managing the Core PLL on SHARC® Processors (Rev. 5) EE-290: Code Example (Rev 5, 03/2012) | PDF
409 kB |
EE-284: Implementing Overlays on ADSP-21160 SHARC® Processors (Rev. 1) EE-284: Software Code | PDF
323 kB |
EE-277: Estimating Power for the ADSP-21362 SHARC® Processors (Rev. 1) | PDF
130 kB |
EE-286: Interfacing SDRAM Memories to SHARC® Processors (Rev. 5) EE-286: Code Example (Rev 5, 11/2010) | PDF
1701 kB |
EE-278: Interfacing NAND Flash Memory with ADSP-21161 SHARC® Processors (Rev. 1) EE-278 Software Code | PDF
0 kB |
EE-285: Migrating from ADSP-21065L to ADSP-21375 SHARC® Processors (Rev. 2) | PDF
103 kB |
EE-279: Interfacing NAND Flash Memory with ADSP-2126x SHARC® Processors (Rev. 1) EE-279 Software Code | PDF
1088 kB |
EE-222: Interfacing the ADSP-21262 SHARC EZ-KIT Lite Boards to High-Speed Converter Evaluation Boards (Rev. 1) | PDF
479 kB |
EE-220: Using External Memory with Third Generation SHARC® Processors and the Parallel Port (Rev. 2) | PDF
80 kB |
EE-273: Using the VisualDSP++ Command-Line Installer (Rev. 1) | PDF
96 kB |
EE-270: Extended-Precision Fixed-Point Arithmetic on SIMD SHARC® Processors (Rev. 1) EE-270 Software Code | PDF
86 kB |
EE-250: Estimating Power Dissipation for Industrial Grade ADSP-21262 SHARC® Processors (Rev. 1) | PDF
91 kB |
EE-264: Interfacing MultiMediaCard™ with ADSP-2126x SHARC® Processors (Rev. 1) EE-264 Software Code | PDF
975 kB |
EE-268: Programming Asynchronous Sample Rate Converters on ADSP-2136x SHARC® Processors (Rev. 1) ZIP File: Software Code (04/2005) | PDF
- ADSP-2126x: 144 Pin LQFP Package adsp-21262
- ADSP-2126x: 136 Ball MBGA Package adsp-21262
- ADSP-21161: 225 ball PBGA Package Silicon (Rev. 1.2) adsp-21261
- EE-112: Class Implementation in Analog C++ adsp-ts101s
- EE-356: Emulator and Evaluation Hardware Troubleshooting Guide for CCES Users (Rev. 2) adsp-ts101s
- EE-356: Associated Files adsp-ts101s
- EE-357: Static Voltage Scaling for ADSP-2148x SHARC® Processors (Rev. 1) adsp-21262
- EE-357: Code Example (Rev 1, 03/2013) adsp-21262
- EE-355: Expert In-Circuit FLASH Programmer for SHARC® Processors (Rev. 1) adsp-21262
- EE-355: Code Example (Rev 1, 08/2012) adsp-21262
- EE-352: Soldering Considerations for Exposed-Pad Packages (Rev. 1) adsp-21262
- EE-352: Associated Files adsp-21262
- EE-346: Using the On-Chip Thermal Diode on Analog Devices Processors (Rev. 2) adsp-21262
- EE-346: Code example (Rev 2, 08/2010) adsp-21262
- EE-243: Using the Expert DAI for SHARC® Processors (Rev. 7) adsp-21262
- EE-243: Code example (Rev 7, 06/2010) adsp-21262
- EE-349: ADSP-2146x Board Design Guidelines for DDR2 Memory (Rev. 3) adsp-21262
- EE-349: Schematics (Rev 3, 11/2012) adsp-21262
- EE-348: Estimating Power for ADSP-214xx SHARC®Processors (Rev. 4) adsp-21262
- EE-348: Power Calculator (Rev 4, 02/2011) adsp-21262
- EE-345: Boot Kernel Customization and Firmware Upgradeability on SHARC Processors® (Rev. 1) adsp-21262
- EE-345: Code example (Rev 1, 10/2009) adsp-21262
- EE-332: 周期计数与分析 adsp-ts101s
- EE-332: Cycle Counting and Profiling (Rev. 2) adsp-ts101s
- EE-332: Code example adsp-ts101s
- EE-299: Estimating Power Dissipation for ADSP-21368 SHARC Processors adsp-21262
- EE-322: Expert Code Generator for SHARC® Processors (Rev. 5) adsp-21262
- EE-322: Code Example (Rev 5, 01/2012) adsp-21262
- EE-328: 将ADSP-2106x/2116x 的设计移植到ADSP-2126x/2136x/ 2137x SHARC®处理器系统 (Rev. 1) adsp-21262
- EE-305: 基于SHARC®处理器的系统设计与调试 (Rev. A) adsp-21262
- EE-340: SHARC®处理器和Blackfin®处理器的SPI 连接 (Rev. 1) adsp-21262
- EE-285: 从ADSP-21065L 转向使用ADSP-21375 SHARC®处理器 (Rev. 2) adsp-21262
- EE-175: 仿真器与EZ-KIT Lite®评估系统问题解决指南 (Rev. 10) adsp-ts101s
- EE-175: RMA forms (Rev 10, 11/2007) adsp-ts101s
- EE-68: JTAG 仿真技术参考 (Rev. 10) adsp-ts101s
- EE-340: Connecting SHARC® and Blackfin® Processors over SPI (Rev. 1) adsp-21262
- EE-340: Code example adsp-21262
- EE-320: Implementing an Ogg Vorbis Decoder on SHARC® Processors (Rev. 1) adsp-21262
- EE-320: Code example (Rev 1, 06/2008) adsp-21262
- EE-120: Interfacing Assembly Language Programs to C adsp-ts101s
- ADSP-21161N SHARC On-chip SDRAM Controller (Rev. EE-163) adsp-21262
- EE-323: Implementing Dynamically Loaded Software Modules (Rev. 1) adsp-21262
- EE-323: Associated Code adsp-21262
- EE-72: Generation Boot EPROMS for the SHARC's EZ-KIT Lite's (ADSP21061 with an ID=001) adsp-21262
- EE-329: Running FAT16 File Systems and DOS Commands on SHARC® Processors (Rev. 1) adsp-21262
- EE-329: Code Example (Rev 1, 09/2007) adsp-21262
- EE-330: Windows Vista Compatibility in VisualDSP++ 5.0 Development Tools (Rev. 1) adsp-ts101s
- EE-266: Programming S/PDIF on ADSP-2136x and ADSP-21371 SHARC® Processors (Rev. 2) adsp-21262
- EE-266: Code example (Rev 2, 08/2007) adsp-21262
- EE-231: In-Circuit Programming of an SPI Flash with SHARC® Processors (Rev. 2) adsp-21262
- EE-231: Code example (Rev 2, 08/2007) adsp-21262
- EE-328: Migrating from ADSP-2106x/2116x to ADSP-2126x/2136x/2137x SHARC® Processors (Rev. 1) adsp-21262
- EE-319: Estimating Power Dissipation for ADSP-21375 SHARC® Processors (Rev. 1) adsp-21262
- EE-318: Estimating Power Dissipation for ADSP-21371 SHARC® Processors (Rev. 1) adsp-21262
- EE-175: Emulator and Evaluation Hardware Troubleshooting Guide for VisualDSP++ Users (Rev. 14) adsp-ts101s
- EE-175: Associated Files adsp-ts101s
- EE-280: In-Circuit Flash Programming on ADSP-2106x SHARC® Processors (Rev. 2) adsp-21262
- EE-280: Code Example (Rev 2, 03/2007) adsp-21262
- EE-313: Land Pattern Compatibility Between 28x28 MQFP and LQFP Packages (Rev. 1) adsp-21262
- EE-56: Tips and Tricks on SHARC® EPROM and Host Boot Loader (Rev. 3) adsp-21262
- EE-84: External Port DMA Modes of Operation for SHARC Processors (Rev. 2) adsp-21262
- EE-084: Code Example (Rev 2, 2/2007) adsp-21262
- EE-223b: In-Circuit Flash Programming on SHARC® Processors (Rev. 2) adsp-21262
- EE-223: Code Example (Rev 2, 02/2007) adsp-21262
- EE-253: Power Bypass Decoupling of SHARC® Processors (Rev. 1) adsp-21262
- EE-296: Using the UART Port Controller on SHARC® Processors (Rev. 2) adsp-21262
- EE-295: Implementing Delay Lines on SHARC® Processors (Rev. 1) adsp-21262
- EE-295: Code Example (Rev 1, 10/2006) adsp-21262
- EE-305: Designing and Debugging Systems with SHARC Processors (Rev. 1) adsp-21262
- EE-303: Using VisualDSP++® Thread-Safe Libraries with a Third-Party RTOS (Rev. 1) adsp-ts101s
- EE-290: Managing the Core PLL on SHARC® Processors (Rev. 5) adsp-21262
- EE-290: Code Example (Rev 5, 03/2012) adsp-21262
- EE-284: Implementing Overlays on ADSP-21160 SHARC® Processors (Rev. 1) adsp-21262
- EE-284: Software Code adsp-21262
- EE-277: Estimating Power for the ADSP-21362 SHARC® Processors (Rev. 1) adsp-21262
- EE-286: Interfacing SDRAM Memories to SHARC® Processors (Rev. 5) adsp-21262
- EE-286: Code Example (Rev 5, 11/2010) adsp-21262
- EE-278: Interfacing NAND Flash Memory with ADSP-21161 SHARC® Processors (Rev. 1) adsp-21262
- EE-278 Software Code adsp-21262
- EE-285: Migrating from ADSP-21065L to ADSP-21375 SHARC® Processors (Rev. 2) adsp-21262
- EE-279: Interfacing NAND Flash Memory with ADSP-2126x SHARC® Processors (Rev. 1) adsp-21262
- EE-279 Software Code adsp-21262
- EE-222: Interfacing the ADSP-21262 SHARC EZ-KIT Lite Boards to High-Speed Converter Evaluation Boards (Rev. 1) adsp-21262
- EE-220: Using External Memory with Third Generation SHARC® Processors and the Parallel Port (Rev. 2) adsp-21262
- EE-273: Using the VisualDSP++ Command-Line Installer (Rev. 1) adsp-ts101s
- EE-270: Extended-Precision Fixed-Point Arithmetic on SIMD SHARC® Processors (Rev. 1) adsp-21262
- EE-270 Software Code adsp-21262
- EE-250: Estimating Power Dissipation for Industrial Grade ADSP-21262 SHARC® Processors (Rev. 1) adsp-21262
- EE-264: Interfacing MultiMediaCard™ with ADSP-2126x SHARC® Processors (Rev. 1) adsp-21262
- EE-264 Software Code adsp-21262
- EE-268: Programming Asynchronous Sample Rate Converters on ADSP-2136x SHARC® Processors (Rev. 1) adsp-21262
- ZIP File: Software Code (04/2005) adsp-21262
- EE-230: Code Overlays on the Third Generation SHARC® Family of Processors (Rev. 2) adsp-21262
- EE-230 Software Code (4/2005) adsp-21262
- EE-267: Implementing In-Place FFTs on SISD and SIMD SHARC® Processors (Rev. 1) adsp-21262
- EE-267 Software Code adsp-21262
- EE-261: Understanding Jitter Requirements of PLL-Based Processors (Rev. 1) adsp-ts101s
- EE-260: Interfacing AD7865 Parallel ADCs to ADSP-2136x SHARC® Processors (Rev. 1) adsp-21262
- EE-260 Software Code adsp-21262
- EE-259: Interfacing AD7865 Parallel ADCs to ADSP-21161 SHARC® Processors (Rev. 1) adsp-21262
- EE-259 Software Code adsp-21262
- EE-255: Porting PC-Based MP3 Player Software to ADSP-21262 SHARC® Processors (Rev. 1) adsp-21262
- EE-254: Interfacing ADSP-21365 SHARC® PDAP to ADSP-BF533 Blackfin® EBIU (Rev. 1) adsp-21262
- EE-254 Software Code adsp-21262
- EE-248: Interfacing AD7676 ADCs to ADSP-21365 SHARC® Processors (Rev. 1) adsp-21262
- EE-248 Software Code adsp-21262
- EE-247: Interfacing AD7676 ADCs to ADSP-21065L SHARC® Processors (Rev. 1) adsp-21262
- EE-247 Software Code adsp-21262
- EE-246: Interfacing AD7276 High-Speed Data Converters to ADSP-21262 SHARC® Processors (Rev. 1) adsp-21262
- EE-246 Software Code adsp-21262
- EE-244: Interfacing Gated Clocks to ADSP-21065L SHARC® Processors (Rev. 1) adsp-21262
- EE-244 Software Code adsp-21262
- EE-202: Using the Expert Linker for Multiprocessor LDFs (Rev. 3) adsp-ts101s
- EE-202 Software Code adsp-ts101s
- EE-241: SHARC® DSPs to TigerSHARC® Processors Code Porting Guide (Rev. 1) adsp-ts101s
- EE-241 Software Code adsp-ts101s
- EE-235: An Introduction to Scripting in VisualDSP++® (Rev. 1) adsp-ts101s
- EE-232: Configuring the Signal Routing Unit of ADSP-2126x SHARC® DSPs (Rev. 1) adsp-21262
- EE-219: Connecting Character LCD Panels to ADSP-21262 SHARC® DSPs (Rev. 1) adsp-21262
- EE-219 Software Code adsp-21262
- EE-216: Estimating Power Dissipation for ADSP-21262S SHARC® DSPs adsp-21262
- EE-210: SDRAM Selection and Configuration Guidelines for ADI Processors (Rev. 2) adsp-ts101s
- EE-189: Link Port Tips & Tricks For ADSP-2106x & ADSP-2116x SHARC® DSPs adsp-21262
- EE-212: Connecting the AD74111 Mono Audio Codec Evaluation Board to the ADSP-21161N SHARC® EZ-KIT™ Lite Board adsp-21262
- EE-212 Software Code adsp-21262
- EE-208: Considering the ADSP-21262 SHARC® DSP adsp-21262
- EE-209: Asynchronous Host Interface on ADSP-21161N SHARC® Processors (Rev. 2) adsp-21262
- EE-199: Link Port Booting the ADSP-21161 SHARC® DSP adsp-21262
- EE-199 Software Code adsp-21262
- EE-195: Moving from the ADSP-21160M SHARC® DSP to the ADSP-21160N SHARC DSP adsp-21262
- EE-194: Connecting the AD1836A Evaluation Board to the ADSP-21161N SHARC EZ-KIT Lite™ adsp-21262
- EE-194 Software Code adsp-21262
- EE-191: Implementing a Glueless UART Using The SHARC® DSP SPORTs adsp-21262
- EE-191 Software Code adsp-21262
- EE-177: SHARC® SPI Slave Booting (Rev. 3) adsp-21262
- EE-177: Code Example (Rev 3, 01/2007) adsp-21262
- EE-68: Analog Devices JTAG Emulation Technical Reference (Rev. 10) adsp-ts101s
- EE-141: Benchmarking C Code on the ADSP-2106x and the ADSP-2116x Family of DSPs adsp-21262
- EE-180: Using Code Overlays from ROM on the ADSP-21161N EZ-KIT Lite adsp-21262
- EE-180 Software Code adsp-21262
- EE-41: SHARC Link Port Timing Notes adsp-21262
- EE-166: ADSP-2106x EPROM Overlay Support with VisualDSP++ 2.0 adsp-21262
- EE-166 Software Code adsp-21262
- EE-148: Introduction to SHARC® Multiprocessor Systems using VisualDSP++™ adsp-21262
- EE-148 Software Code adsp-21262
- EE-160: Examining ADSP-21160 Link Port Backward Compatibility to the ADSP-2106x Link Ports adsp-21262
- EE-160 Software Code adsp-21262
- EE-140: Using the ADSP-21160 Serial Ports in Multi-channel Mode adsp-21262
- EE-138: Recommended Handling of Unused ADSP-21161 Pins adsp-21262
- EE-136: Using the Programmable I/O FLAGS and IOFLAG register on the ADSP-21161 adsp-21262
- EE-136 Software Code adsp-21262
- EE-134: Writing C Compatible Assembly Code Interrupt Handlers for the SHARC® Family adsp-21262
- EE-132: Placing C Code and Data Modules in SHARC memory using VisualDSP++™ adsp-21262
- EE-132 Software Code adsp-21262
- EE-128: DSP in C++: Calling Assembly Class Member Functions From C++ adsp-ts101s
- EE-127: The ADSP-21065L On-chip SDRAM Controller (Rev. 1) adsp-21262
- EE-126: The ABCs of SDRAMemories (Rev. 1) adsp-ts101s
- EE-116: SHARC Shortword DMA adsp-21262
- EE-116 Software Code adsp-21262
- EE-109: ADSP2106x : Using 2106x SPORT's as Timers adsp-21262
- EE-106: Link Port Open Systems Interconnect Cable Standard adsp-21262
- EE-98: Using External Bus Arbitration to Group More Than Two ADSP-21065L into a Multiprocessing Cluster adsp-21262
- EE-86: Interfacing SHARC 2106x DSPs to PLX 9080 PCI Bridge Chips adsp-21262
- EE-85: Recommended Handling of Unused SHARC Pins adsp-21262
- EE-77: SHARC Link Port Booting adsp-21262
- EE-70: ADSP-2106x SPORT DTx pins: Is There Potential MCM Data Contention Between Different SHARCs adsp-21262
- EE-69: Understanding and Using Linker Description Files on SHARC Processors (Rev. 2) adsp-21262
- EE-069: Code Example (Rev 2, 01/2007) adsp-21262
- EE-66: Using Memory Overlays adsp-21262
- EE-63: Considerations for FLASH PROMS with Timing Requirements adsp-21262
- EE-62: Accessing Short Word Memory In C adsp-21262
- EE-47: ADSP-2106x Link Ports - Maximum Throughput adsp-21262
- EE-46: SHARC Internal Power Measurements adsp-21262
- EE-44: How to design a DRAM Controller to interface a DRAM with the SHARC DSP adsp-21262
- EE-44 Software Code
adsp-21262
- EE-42: C-Programs on the ADSP-2106x adsp-21262
- EE-16: Using Token Passing to Control SHARC Link Port Bi-directional Communication adsp-21262
- EE-16 Software Code adsp-21262
- EE-110: A Quick Primar on ELF and DWARF File Formats adsp-ts101s
- EE-159: Initializing DSP System & Control Registers From C and C++ adsp-ts101s
- EE-151: Implementing Software Data Overlays for the ADSP-21161 Using the EZ-KIT adsp-21262
- EE-151 Software Code adsp-21262
- EE-104: Setting Up Streams with the VisualDSP Debugger adsp-ts101s
- EE-104 Software Code adsp-ts101s
- EE-74: Analog Devices Serial Port Development and Troubleshooting Guide adsp-21262
- EE-103: Performing Level Conversion Between 5v and 3.3v IC's adsp-ts101s
- EE-37: How to Interface an LCD to the 21xx and 2106x Family DSP's adsp-21262
- ADSP-2126x SHARC® Processor Hardware Reference (Rev. 5.1) adsp-21262
- CrossCore® Embedded Studio 2.4.0 Assembler and Preprocessor Manual (Rev. 1.8) adsp-21262
- CrossCore® Embedded Studio 2.4.0 Linker and Utilities Manual (Rev. 1.8) adsp-21262
- CrossCore® Embedded Studio 2.4.0 Loader and Utilities Manual (Rev. 1.8) adsp-21262
- CrossCore® Embedded Studio 2.4.0 C/C++ Compiler Manual for SHARC® Processors (Rev. 1.7) adsp-21262
- CrossCore Embedded Studio 2.4.0 C/C++ Library Manual for SHARC Processors (Rev. 1.7) adsp-21262
- lwIP for CrossCore® Embedded Studio 1.0.0 User’s Guide (Rev. 1.1) adsp-21262
- CrossCore软件许可指南,修订版1.1,2012年7月(pdf,360 kB) (Rev. 1.4) adsp-21262
- CrossCore® Software Licensing Guide (Rev. 1.5) adsp-21262
- VisualDSP++® 5.0 Assembler and Preprocessor Manual (Rev. 3.4) adsp-ts101s
- VisualDSP++® 5.0 C/C++ Compiler Manual for SHARC® Processors (Rev. 1.5) adsp-21262
- VisualDSP++® 5.0 Loader and Utilities Manual (Rev. 2.5) adsp-ts101s
- VisualDSP++® 5.0 Licensing Guide (Rev. 1.4) adsp-ts101s
- VisualDSP++® 5.0 Kernel (VDK) Users Guide (Rev. 3.5) adsp-ts101s
- VisualDSP++® 5.0 Linker and Utilities Manual (Rev. 3.5) adsp-ts101s
- VisualDSP++® 5.0 Run-Time Library Manual for SHARC® Processors (Rev. 1.5) adsp-21262
- VisualDSP++® 5.0 Users Guide (Rev. 3.0) adsp-ts101s
- VisualDSP++® 5.0 Quick Installation Reference Card (Rev. 3.1) adsp-ts101s
- VisualDSP++® 5.0 Getting Started Guide (Rev. 3.0) adsp-ts101s
- VisualDSP++® 5.0 Product Release Bulletin (Rev. 3.0) adsp-ts101s
- ICE-1000/ICE-2000 Emulator User’s Guide (Rev. 1.2) adsp-21262
- HPUSB, USB, and HPPCI Emulator User’s Guide (Rev. 3.2) adsp-21262
- ICE-100B Emulator User’s Guide (Rev. 1.1) adsp-21262
- ADSP-21261 SHARC Anomaly List for Revisions 0.1 (Rev. J) adsp-21261
- Summit-ICE PCI Emulator Hardware Installation Guide (Rev. 4) adsp-ts101s
- SHARC Processor Family adsp-21262
- SHARC Audio EZ-Extender手册,修订版1.1,2012年8月 (Rev. 1.1) adsp-21262
- SHARC® Audio EZ-Extender® Manual (Rev. 1.1) adsp-21262
- Blackfin/SHARC USB EZ-Extender手册,修订版1.1,2012年7月 (Rev. 1.1) adsp-21262
- Blackfin®/SHARC® USB EZ-Extender® Manual (Rev. 1.1) adsp-21262
- SHARC® USB EZ-Extender® Manual (Rev. 2.1) adsp-21262
- SHARC® EZ-Extender® Manual (Rev. 3.1) adsp-21262
- ADI Complementary Parts Guide - Supervisory Devices and DSP Processors adsp-ts101s
- An Efficient Asynchronous Sampling-rate Conversion Algorithm for... adsp-21262
|