ADV7184 Multiformat SDTV Video Decoder with Fast Switch Overlay Support

The ADV7184 integrated video decoder automatically detects and converts standard analog baseband television signals compatible with worldwide NTSC, PAL, and SECAM standards into 4:2:2 component video data compatible with 16- or 8-bit CCIR 601/CCIR 656.

The advanced, highly flexible digital output interface enables performance video decoding and conversion in line-locked, clock-based systems. This makes the device ideally suited for a broad range of applications with diverse analog video characteristics, including tape-based sources, broadcast sources, security and surveillance cameras, and professional systems.

The accurate 10-bit ADC provides professional quality video performance and is unmatched. This allows true 8-bit resolution in the 8-bit output mode.

The 12 analog input channels accept standard composite, S-video, and component video signals in an extensive number of combinations.

AGC and clamp-restore circuitry allow an input video signal peak-to-peak range of 0.5 V to 1.6 V. Alternatively, these can be bypassed for manual settings.

The fixed 54 MHz clocking of the ADCs and datapath for all modes allows very precise, accurate sampling and digital filtering. The line-locked clock output allows the output data rate, timing signals, and output clock signals to be synchronous, asynchronous, or line locked even with ±5% variation in line length. The output control signals allow glueless interface connections in most applications. The ADV7184 modes are set up over a 2-wire, serial, bidirectional port (I2C compatible).

SCART and overlay functionality are enabled by the ability of the ADV7184 to process CVBS and standard definition RGB signals simultaneously. Signal mixing is controlled by the fast blank pin. The ADV7184 is fabricated in a 3.3 V CMOS process. Its monolithic CMOS construction ensures greater functionality with lower power dissipation. It is packaged in a small, Pb-free, 80-lead LQFP.

Applications
  • High end DVD recorders
  • Video projectors
  • HDD-based PVRs/DVDRs
  • LCD TVs
  • Set-top boxes
  • Security systems
  • Digital televisions
  • AVR receivers
Features and Benefits
  • Multiformat video decoder supports NTSC (J/M/4.43), PAL (B/D/G/H/I/M/N), SECAM
  • Integrates four 54 MHz, 10-bit ADCs
  • SCART fast blank support
  • Clocked from a single 28.63636 MHz crystal
  • Line-locked clock-compatible (LLC)
  • Adaptive Digital Line Length Tracking (ADLLT™), signal processing, and enhanced FIFO management give mini-TBC functionality
  • 5-line adaptive comb filters
  • Proprietary architecture for locking to weak, noisy, and unstable video sources such as VCRs and tuners
  • Subcarrier frequency lock and status information output
  • Integrated automatic gain control (AGC) with adaptive peak white mode
  • Macrovision® copy protection detection
  • Chroma transient improvement (CTI)
Audio & Video Products
Data Sheets
Documentnote
ADV7184: Multiformat SDTV Video Decoder with Fast Switch Overlay Support Data Sheet (Rev. A)PDF 3126 kB
Application Notes
Documentnote
AN-1260: Crystal Design Considerations for Video Decoders, HDMI Receivers, and Transceivers (Rev. 0)PDF 126 kB
AN-1180: Optimizing Video Platforms for Automated Post-Production Self-Tests (Rev. 0)PDF 187 kB
AN-850: Adaptive Digital Line Length Tracking (Rev. 0)PDF 203 kB
User Guides
Documentnote
ADV7184 Design Support Files
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
ADV7184BSTZ Production80 ld LQFP (14x14mm)OTH 90-40 to 85C10.649.46Y
ADV7184: Multiformat SDTV Video Decoder with Fast Switch Overlay Support Data Sheet (Rev. A) adv7184
AN-1260: Crystal Design Considerations for Video Decoders, HDMI Receivers, and Transceivers (Rev. 0) adv7401
AN-1260:视频解码器、 HDMI 接收器和收发器的晶振设计考虑因素 adv7401
AN-1180: 针对生产后自测优化视频平台 (Rev. 0) adv7123
AN-1180: Optimizing Video Platforms for Automated Post-Production Self-Tests (Rev. 0) adv7123
AN-850: Adaptive Digital Line Length Tracking (Rev. 0) adv7401