SSM2306 2 W, Filterless, Class-D Stereo Audio Amplifier

The SSM2306 is a fully integrated, high efficiency, Class-D stereo audio amplifier designed to maximize performance for portable applications. The application circuit requires minimum external components and operates from a single 2.5 V to 5.0 V supply. It is capable of delivering 2 W of continuous output power with less than 10% total harmonic distortion plus noise (THD + N) driving a 4 Ω load from a 5.0 V supply.

The SSM2306 features an ultralow idle current, high efficiency, and a low noise modulation scheme. It operates with >87% efficiency at 1.4 W into 8 Ω from a 5.0 V supply and has a signal-to-noise ratio (SNR) that is better than 96 dB. Pulse-density modulation (PDM) offers lower electromagnetic interference (EMI) radiated emissions compared to other Class-D architectures.

The SSM2306 has a micropower shutdown mode with a typical shutdown current of 20 nA. Shutdown is enabled by applying a logic low to the SD pin.

The architecture of the device allows it to achieve a very low level of pop and click to minimize voltage glitches at the output during turn-on and turn-off, thereby reducing audible noise on activation and deactivation. The fully differential input of the SSM2306 provides excellent rejection of common-mode noise on the input. Input coupling capacitors can be omitted if the dc input common-mode voltage is approximately VDD/2.

The SSM2306 also has excellent rejection of power supply noise, including noise caused by GSM transmission bursts and RF rectification.

The SSM2306 has a preset gain of 18 dB that can be reduced by using external resistors.

The SSM2306 is specified over the commercial temperature range (−40°C to +85°C). It has built-in thermal shutdown and output short-circuit protection. It is available in a 16-lead, 3 mm × 3 mm lead frame chip scale package (LFCSP).

Applications

Features and Benefits
  • Filterless Class-D amplifier with built-in output stage
  • 2 W into 4 Ω and 1.4 W into 8 Ω at 5.0 V supply
  • Ultralow idle current with load resistance
  • >87% efficiency at 5.0 V, 1.4 W into 8 Ω speaker
  • Better than 96 dB signal-to-noise ratio (SNR)
  • Available in a 16-lead, 3 mm × 3 mm LFCSP
  • Single-supply operation from 2.5 V to 5.0 V
  • 20 nA ultralow shutdown current
  • Short-circuit and thermal protection
  • Pop-and-click suppression
  • Built-in resistors reduce board component count
  • Default fixed 18 dB gain and user-adjustable
  • Audio & Video Products
    Data Sheets
    Documentnote
    SSM2306: 2 W, Filterless, Class-D Stereo Audio Amplifier Data Sheet (Rev. A)PDF 408.87 K
    Application Notes
    Documentnote
    AN-938: Digital and Analog Measurement Units for Digital CMOS Microphone Preamplifier ASICs (Rev. 0)PDF 75 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    SSM2306CPZ-REEL Production16 ld LFCSP (3x3mm, 1.5mm exposed pad)REEL 5000-40 to 85C00.89Y
    SSM2306CPZ-REEL7 Production16 ld LFCSP (3x3mm, 1.5mm exposed pad)REEL 1500-40 to 85C00.89Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    SSM2306-EVALZEvaluation Board50.5Y
    SSM2306-MINI-EVALZEvaluation Board-1Y
    Reference Materials
    SSM2306: 2 W, Filterless, Class-D Stereo Audio Amplifier Data Sheet (Rev. A) ssm2306
    AN-938: 数字CMOS麦克风前置放大器ASIC的数字和模拟测量单位 (Rev. 0) ssm2166
    AN-938: Digital and Analog Measurement Units for Digital CMOS Microphone Preamplifier ASICs (Rev. 0) ssm2166
    CN-0162: Analog Audio Input, Class-D Output with the ADAU1701 SigmaDSP... adau1701