AEIC-7272-S16 Quad Differential Line Driver
These line drivers are pin compatible with 26LS31 in applications where pin 4 = 5V and pin 12 = GND. Internal clamp diodes allow trouble-free operation when driving cable lengths exceeding 100m. Split supplies are provided to minimize standby power dissipation in high voltage applications. The logic should be powered from a regulated 5V supply at the VccBias pin. The output stages may then be powered by a separate supply at VccDrivers, up to 30V. Output voltage swings of 0.3V to VCC-1.9V are typical. The line driver outputs are protected against shorts to ground, shorts to Vcc and to other outputs, by a two-fold scheme of current limiting and thermal shutdown. This assures highly reliable operation in harsh environments.
This part is available in 16L SOIC (Pb-free) package.
For more information or to request a sample Click Here
Features- Supply (Bias) Voltage Range 3.5V to 30V
- Operation to 800KHz
- CMOS and TTL Compatible Inputs
- Separate logic bias and driver supply pins
- Optional single supply operation for moderate power applications
- High Impedance Buffered Inputs with hysteresis
- Tri-State outputs
- 80mA peak SINK/SOURCE current
Applications- Industrial encoder interfacing
- Industrial sensor interfacing
- Proximity switches
- Industrial controllers PLC
- Light barriers
- MR sensor systems
| | Specification | Value |
|---|
| Lifecycle | Active | | Distrib. Inventory | Yes | | Samples Available | Yes | | Counter Size | N/A | | Frequency | 800KHz | | RoHS6 Compliant | Y | | Package | SOIC |
|
Data Sheet (1)
Product Change Notice (PCN) (1)
