AFBR-2310Z AFBR-2310Z Fiber Optic Receiver for Multi GHz Analog Links
The AFBR-2310Z is a compact, high performance, cost effective receiver for multi GHz analog communication over single mode optical fiber.
The receiver incorporates a wide bandwidth, low dark current InGaAs/InP PIN photodiode packaged inside a TO-header, together with a high performance E-pHEMT RF amplifier and its bias network.
A receptacle designed according to the CEI/IEC 61754-13 standard allows coupling of the optical signal by means of a FC fiber patchcord.
The receiver is optimized for operation at 1310 nm and 1550 nm but may be used over a wide wavelength range ranging from 850 nm to 1600 nm, with reduced performance.
The amplifier low noise figure and PIN high responsivity allow for a high sensitivity and thus a high splitting ratio in branched Passive Optical Networks.
Access to the RF output as well as bias of PIN and amplifier is through a flexible printed circuit board. The RF output requires external AC coupling.
The receptacle is designed for assembly into a properly shaped aperture in the customer box wall or fixture.
Features- Compact package
- Low dark current PIN
- High performance RF amplifier
- FC Single mode fiber connectorized optical receptacle
- Low power consumption
- Flex interconnect to customer PCB
- Minimal external circuitry required
- RoHS6 compliant
- Pairs to AFBR-1310Z Fiber Optic Transmitter for Multi GHz analog links
Applications- Analog optical links for satellite signal distribution
- In-building antenna remote systems
Related Product | | Specification | Value |
|---|
| Lifecycle | Active | | Distrib. Inventory | Yes | | Emitter | FP Laser | | Fiber Type | Singlemode Glass | | RoHS6 Compliant | Y | | Maximum Distance (m) | 1310 | | Max Qty of Samples | 2 | | Nominal Optical Wavelength (nm) | 1310 | | Form Factor | Industrial |
|
Data Sheet (1)
