SAF-XC878M-16FFI 3V3 AC

XC87x - series expands Infineon’s 8-bit XC800 microcontroller (MCU) family to provide more scalable performance and up to 64KB Flash memory for cost-sensitive industrial and automotive applications. Operating at up to 26.7MHz and equipped with a 16-bit vector computer XC87x MCUs offers 16-bit performance at 8-bit costs. This exceptional performance, coupled with 2 independent PWM units with up to 10 PWM outputs and a 10-bit Analog- to-Digital Converter (ADC), makes these devices ideal for implementing Field Oriented Control (FOC) and Power Factor Correction (PFC) at the lowest system cost. The devices also are designed to enable simplified development of CAN (Controller Area Network) systems through an on-chip MultiCAN interface. The XC87x - series provides two package options XC878 in LQFP-64 and XC874 in VQFN-48 package.

ParametricSAF-XC878M-16FFI 3V3 AC
Clock Frequency  max26.7MHz
SRAM (incl. Cache)3.0kByte
CAN Nodes0
A/D Input Lines (incl. FADC)8
Program Memory64.0kByte
Type of MemoryFlash
FlexRayTMno
Number of ADC Modules1.0
Digital I/O Pins40
EEPROM Emulation (Data-Flash)yes
Timed I/O Pins (PWM, CAPCOM)14
Serial I/O Interfaces3
Type of Serial I/O InterfacesSPI
Type of Serial I/O InterfacesUART
Instruction Width ([bits])8
Instruction Set Architecture8051 (8-bit)
Peripheral Control Processorno
DMA Channels0
Timer/Counter4
External Bus Interfaceno
Fast Flash Programmingno
Temperature-40 to 85°C
Power Mode4
DSP Functionalityyes
On-chip Clock Generationyes
I/O Operation Voltages3.3V
Touch/LED Matrix Controlno
On-chip Voltage Regulatoryes
Real Time Clockno
Floating Point Unitno
Watchdog Timeryes
Oscillator Watchdogyes
QualificationIndustrial
Additional FeaturesIndustrial
Budgetary Price €€/1k-
Summary of Features:
  • Package: PG-LQFP-64
  • CAN Nodes: 0
  • Program Memory: 64.0 KByte
  • FlexRay™: no
  • Type of Serial I/O Interfaces: 2xUART, 1xSCC
Target Applications:
  • HVAC systems
  • Motor control
  • Pumps and fans
  • LED control
  • Roof module
  • Seat module
  • Center stack
  • Low cost BCM module
Application Notes
TitleSizeDateVersion
AP24026 - EMC and System-ESD Design Guidelines for Board LayoutEN2.9 MB15 Mar 201603_05
基于XC800的直流无刷风机180度控制方案设计指导 - 说明CN3.5 MB07 Mar 201101_00
基于XC800的直流无刷风机180度控制方案设计指导 - 软件664 KB07 Mar 2011
Power Saving Features - Application to XC8781.2 MB11 Mar 201001_00
XC878 Easy Kit: Playing music using the CAPCOM6 module using the SDCC Compiler5.8 MB01 Jun 201002_00
XC878 Class B Software Library1.7 MB31 Mar 200901_03
Presentations
TitleSizeDateVersion
XC878 Product Overview1.4 MB28 Jul 200801_01
XC800 Peripheral Highlights416 KB28 Jul 200801_00
User Manual
TitleSizeDateVersion
XC878 User's Manual6.3 MB13 Aug 200901_01
XC878用户手册15.6 MB11 Jan 201001_01
Product Brief
TitleSizeDateVersion
XC87x Family Product Brief322 KB10 Feb 2011
Errata Sheet
TitleSizeDateVersion
XC878CLM Series Errata Sheet1.2 MB18 Jan 201301_02
XC878LM Series Errata Sheet793 KB18 Jan 201301_01
Additional Technical Information
TitleSizeDateVersion
XC87x - Data SheetEN2.1 MB09 Mar 201101_05
Evaluation Boards
BoardFamilyDescriptionStatus
KIT_AK_2MOTORDRIVE_V1MicrocontrollerXC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23V–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Simultaneous control of two PMSMs with sensorless FOC & digital PFC with XE164. Sensorless FOC & digital PFC with XC878. V/f control of ACIM for quick evaluation.XC878XE164Fon request
KIT_AK_DAVEDRIVE_V3MicrocontrollerScalable low voltage PMSM motor driver kit with DAVE™ Drive auto code generator. Uses the full power of Infineon microcontrollers, e.g. it generates optimized FOC code for XC878 using a vector computer and XE164 with MAC unit supporting single cycle 16 x 16-bit multiplication and accumulation. This usually requires expert knowledge in both motor control and assembler programming.XC878XE164active and preferred
KIT_AK_FOCDRIVE_V1MicrocontrollerXC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23V–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Sensorless FOC of PMSM with XE164. Sensorless FOC of PMSM with XC878.XC878XE164Factive and preferred
KIT_XC878_EK_V1MicrocontrollerFor evaluation of XC864/XC878 including documentation, compiler, debugger, operating system, parallel cable and one extension board.XC864XC878discontinued
Development Tools
TitleSizeDateVersion
DAVE™ XC878CLM Series DIP file for DAVE™ (Microcontroller Configuration Tool)-latest version9.5 MB19 Aug 201002_02
DAVE™ XC878CLM Series DIP file for DAVE™ (Microcontroller Configuration Tool)9.1 MB08 Jul 200801_01
Design Information XC878 Key Chain285 KB05 Jun 2008
CN SAK-XC822MT-1FRA+AA
EN SAK-C505CA-2RM+CA
基于XC800的直流无刷风机180度控制方案设计指导 - 软件 SAK-XC822MT-1FRA+AA
Power Saving Features - Application to XC878 SAK-XC874-13FVA+5V+AC
XC878 Easy Kit: Playing music using the CAPCOM6 module using the SDCC Compiler SAK-XC874-13FVA+5V+AC
XC878 Class B Software Library low-cost-solutions-for-motor-control-and-automation
XC878 Product Overview SAF-XC878M-16FFI+5V+AC
XC800 Peripheral Highlights SAF-XC888CM-8RFA+AA
XC878 User's Manual SAK-XC874-13FVA+5V+AC
XC878用户手册 SAK-XC874-13FVA+5V+AC
XC87x Family Product Brief SAK-XC874-13FVA+5V+AC
XC878CLM Series Errata Sheet SAK-XC874-13FVA+5V+AC
XC878LM Series Errata Sheet SAK-XC874-13FVA+5V+AC
EN SAK-XC874-13FVA+5V+AC
DAVE™ XC878CLM Series DIP file for DAVE™ (Microcontroller Configuration Tool)-latest version SAK-XC874-13FVA+5V+AC
DAVE™ XC878CLM Series DIP file for DAVE™ (Microcontroller Configuration Tool) SAK-XC874-13FVA+5V+AC
Design Information XC878 Key Chain SAK-XC874-13FVA+5V+AC