SLE 66R01L

Contactless Interface

- Operation frequency 13.56 MHz

- Data rate 106 kbit/s in both directions

- Contactless transmission of data and supply energy

64 byte EEPROM

Privacy Features

Data protection

NFC Forum™ Operation

Electrical characteristics

ParametricSLE 66R01L
Product Descriptionmy-d™ move lean
ApplicationsTransport Ticketing
InterfacesISO/IEC 14443-3 Type A
InterfacesNFC Forum Type 2 Tag operation
Memory1 fixed sector
EEPROM (admin)16.0Byte
EEPROM (user)48.0kByte
Security Featuresblock locking
Security Featuresindividual page locking
Security Featuresunique serial number
Distance (read/write)Typically up to 10cm and above
Data Rate106kbit/s to card
Data Rate106kbit/s to reader
Endurance10000
Delivery FormsNiAu-bump
Delivery FormsWafer sawn
Retention Time  min5.0year
ToolsEvaluation Kit Contactless
Summary of Features:
  • Physical interface and anticollision compliant to ISO/IEC 14443-3 Type A
  • Read / write distance up to 10 cm and more (influenced by external circuitry i.e. reader and inlay design)
  • Organized in 16 blocks of 4 bytes each
  • 48 bytes freely programmable user memory
  • 16 bytes of service area reserved for UID, configuration, LOCK Bytes, OTP block and manufacturer data
  • Read and write of 128 bytes of User Memory in less than 100 ms
  • Programming time per block < 4 ms
  • Endurance minimum 10,000 erase/write cycles (temperature dependent)
  • Data Retention minimum 5 years (temperature dependent)
  • Double Size UID (7 byte) according to ISO/IEC 14443 Type A
  • One Time Programmable (OTP) memory area
  • Locking mechanism for each block
  • Block Lock mechanism
  • Data integrity supported by 16 bit CRC, parity bit, command length check
  • Anti-tearing mechanism for OTP, password retry counter and value counter
  • Compliant to NFC Forum™ Type 2 Tag Operation
  • Support of Static and Dynamic Memory Structure according to NFC Forum™ Type 2 Tag Operation
  • On-Chip capacitance 17 pF + 5%
  • ESD protection minimum 2 kV
  • Ambient temperature -25°C ... +70°C (for the chip)
Summary of Features:
  • Physical interface and anticollision compliant to ISO/IEC 14443-3 Type A
  • Read / write distance up to 10 cm and more (influenced by external circuitry i.e. reader and inlay design)
  • Organized in 16 blocks of 4 bytes each
  • 48 bytes freely programmable user memory
  • 16 bytes of service area reserved for UID, configuration, LOCK Bytes, OTP block and manufacturer data
  • Read and write of 128 bytes of User Memory in less than 100 ms
  • Programming time per block < 4 ms
  • Endurance minimum 10,000 erase/write cycles (temperature dependent)
  • Data Retention minimum 5 years (temperature dependent)
  • Double Size UID (7 byte) according to ISO/IEC 14443 Type A
  • One Time Programmable (OTP) memory area
  • Locking mechanism for each block
  • Block Lock mechanism
  • Data integrity supported by 16 bit CRC, parity bit, command length check
  • Anti-tearing mechanism for OTP, password retry counter and value counter
  • Compliant to NFC Forum™ Type 2 Tag Operation
  • Support of Static and Dynamic Memory Structure according to NFC Forum™ Type 2 Tag Operation
  • On-Chip capacitance 17 pF + 5%
  • ESD protection minimum 2 kV
  • Ambient temperature -25°C ... +70°C (for the chip)
Data Sheet
TitleSizeDateVersion
Preliminary Data Sheet - my-d™ move lean - SLE 66R01L,EN1.1 MB30 May 201105_11
Product Information
TitleSizeDateVersion
Short Product Information - SLE 66R01L my-d™ move leanEN963 KB07 Dec 201505_10
Application Notes
TitleSizeDateVersion
Infineon-How to operate my-d™ devices in NFC Forum™ Type 2 Tag infrastructures-AN-v01_00-ENEN1.4 MB16 Jan 201511_11
Application Brochure
TitleSizeDateVersion
Transport Ticketing BrochureEN767 KB05 Apr 201503_15
Security for the connected worldEN1.5 MB18 Feb 201602_16
Product Selection Guide
TitleSizeDateVersion
Infineon Chip Card & Security ICs PortfolioEN2.1 MB03 Nov 201511_15
EN SLE+66R01L
EN SLE+66R01L
EN SLE+66R16P
EN S-COM86
EN SLF+9630
EN S-COM86