• 简体中文
• English

TLE4252G

The TLE4252 is a monolithic integrated low-drop voltage tracking regulator in a very small SMD package PG-TO263-5. It is designed to supply off-board systems, e.g. sensors in engine management systems under the severe conditions of automotive applications. Therefore the device is equipped with additional protection functions against reverse polarity and short circuit to GND and battery. With supply voltages up to 40 V the output voltage follows a reference voltage applied at the adjust input with high accuracy. The reference voltage applied directly to the adjust input or by an e.g. external resistor divider can be 1.5 V at minimum. The output is able to drive loads up to 250 mA at minimum while they follow e.g. the 5 V output of a main voltage regulator as reference with high accuracy. The TLE 4252 tracker can be switched into stand-by mode to reduce the current consumption to very low values. This feature makes the IC suitable for low power battery applications.

Parametric TLE4252G Operating Voltage  min  max 3.5V  40.0V Output Voltage Type adj. Accuracy 0.5% Output Current (max.) 200mA Regulator Type Linear->Tracker Dropout Voltage 280mV Quiescent Current 100µA Operating Temperature  min  max -40.0°C  150.0°C Over Voltage Protection no Enable (=Inhibit) yes Reset no Power Fail no Power Good no Status Output no Hold no Watchdog no Early Warning no Automotive Qualified yes Sales Product Name TLE4252G OPN TLE4252GATMA1 Product Status active and preferred Package Name PG-TO263-5 Completely lead free no Halogen free yes RoHS compliant yes Packing Size 1000 Packing Type TAPE & REEL Moisture Level 1

Summary of Features: Output tracking tolerance to reference ≤ ±0.2% Output voltage adjust down to 1.5 V 250 mA output current capability Enable function Very low current consumption in OFF mode Wide operation range: up to 40 V Wide temperature range: -40 °C ≤ T j ≤ 150 °C Output  protected  against  short  circuit  to  GND  and Battery Overtemperature protection Reverse polarity proof Green Product (RoHS compliant) AEC Qualified Benefits: Efficient and accurate voltage replication Heat distribution in the system Robust tracking supply Target Applications: Sensor Supply Heat distribution Secondary µcontroller supply

Data Sheet

Product Brochure

Application Notes

Product Selection Guide

Material Content SheetInfo

PCB Design Data

Evaluation Boards

Package Data

PCB Design Data