TLE4285G

The TLE4285 G is a 5-V fixed voltage regulator in a very small SMD package PG-SCT-595-5. The maximum input voltage is 45 V. The output is able to drive an output current of more than 10 mA while it regulates the output voltage within a 4% accuracy.The Power Fail Output (open collector) is switched to low in case of under-voltage at the output pin. To reduce external components the Power Fail Output has an internal pull-up resistor of 50 k Ω which is connected to the output Q. The device incorporates a temperature protection that disables the circuit at overtemperature.

ParametricTLE4285G
Operating Voltage  min  max6.0V  42.0V
Output Voltage Type5.0V
Accuracy4.0%
Output Current (max.)10mA
Regulator TypeLinear
Dropout Voltage800mV
Quiescent Current100µA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionno
Enable (=Inhibit)no
Resetno
Power Failyes
Power Goodno
Status Outputno
Holdno
Watchdogno
Early Warningno
Automotive Qualifiedyes
Sales Product NameTLE4285G
OPNTLE4285GHTSA1
Product Statusactive and preferred
Package NamePG-SCT595-5
Completely lead freeyes
Halogen freeno
RoHS compliantyes
Packing Size3000
Packing TypeTAPE & REEL
Moisture Level1
Summary of Features:
  • 15 mA current capability
  • Low quiescent current consumption
  • Power fail output
  • Wide operation range: up to 45 V
  • Wide temperature range: -40  ° C to 150  ° C
  • Output protected against short circuit
  • Over temperature protection
  • Very small SMD-Package PG-SCT-595-5
  • Green product (RohS compliant)
  • AEC qualified
Benefits:
  • Robust protection features
  • Wide input operation and temperature range
Target Applications:
  • Automotive general
Diagrams
Data Sheet
TitleSizeDateVersion
TLE4285,EN214 KB20 Jul 201202_02
Product Brochure
TitleSizeDateVersion
What the designer should know: introduction to Automotive Linear Voltage Regulator3.9 MB17 Jul 2014
Application Notes
TitleSizeDateVersion
TLE4267/TLE4267-2 - INH/HOLD FunctionEN244 KB27 Apr 201501_33
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 Jan 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2015-11-24_07-14-44_MA000044883_PG-SCT595-5-1.pdfEN23 KB24 Nov 201502_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 Oct 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 Oct 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 Oct 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 Oct 201301_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
Package Data
TitleSizeDateVersion
PG-SCT595-5-1 | TLE4285GHTSA1EN575 KB11 Apr 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 Oct 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 Oct 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 Oct 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 Oct 201301_00
EN TLE4285G
What the designer should know: introduction to Automotive Linear Voltage Regulator linear-post-regulators
EN TLE42764D+V50
EN TLE8203E
EN TLE4285G
EN TLE4285G
PCB Footprints & Symbols - Altium - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Cadence - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Eagle - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Mentor - v1.0 IFX1763XEJ+V33