TLE4473G V55-2

The TLE4473 is a monolithic integrated voltage regulator with two low dropout outputs, a main output Q1 for loads up to 300 mA and a stand by output Q2 providing a maximum of 190 mA. The stand-by regulator transforms an input voltage V I in the range of 5.6 V ≤ V I ≤ 42 V to an output voltage of V Q2 = 5.0 V ( ± 2%). The main output is tracked to the stand by output voltage and provides also 5 V. A versions of this device with 5 V/3.3 V and 5 V/2.6 V are also available, please refer to the data sheet TLE4473G V53/ TLE4473G V52. The Inhibit input INH1 disables the output Q1 only, whereas Inhibit input INH2 disables both, Q1 and Q2 output. The quiescent current then is 1 µA.

ParametricTLE4473G V55-2
Operating Voltage  min  max5.6V  42.0V
Output Voltage Type5.0V
Accuracy2.0%
Accuracy2.5%
Output Current (max.)300mA
Regulator TypeLinear->Multiple output
Dropout Voltage200mV
Quiescent Current250µA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionno
Enable (=Inhibit)yes
Resetyes
Power Failno
Power Goodno
Status Outputno
Holdno
Watchdogyes
Early Warningno
Automotive Qualifiedyes
Sales Product NameTLE4473G V55-2
OPNTLE4473GV552AUMA1
Product Statusactive and preferred
Package NamePG-DSO-12
Completely lead freeno
Halogen freeyes
RoHS compliantyes
Packing Size1000
Packing TypeTAPE & REEL
Summary of Features:
  • Stand-by Output 190 mA; 5 V  ±  2%
  • Main Output: 300 mA, 5 V Tracked to the Stand-by Output
  • Low Quiescent Current Consumption
  • Disable Function Separately for Both Outputs
  • Wide Operation Range: up to 42 V
  • Very low Dropout Voltage
  • 2 Independent Reset Circuits
  • Watchdog
  • Output Protected against Short Circuit
  • Wide temperature range: -40  ° C to 150  ° C
  • Over temperature protection
  • Overload protection
  • Green product (RoHS compliant)
  • AEC qualified
Benefits:
  • Robust Protection Features
  • Wide Input Operation and Temperature Range
Target Applications:
  • Automotive General
Data Sheet
TitleSizeDateVersion
TLE 4473GV55-2 DataSheet,EN350 KB15 Apr 201001_02
Product Brochure
TitleSizeDateVersion
What the designer should know: introduction to Automotive Linear Voltage Regulator3.9 MB17 Jul 2014
Application Notes
TitleSizeDateVersion
TLE4267/TLE4267-2 - INH/HOLD FunctionEN244 KB27 Apr 201501_33
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 Jan 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2013-08-28_22-26-35_MA000668590_PG-DSO-12-11.pdf23 KB31 Oct 201301_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 Oct 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 Oct 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 Oct 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 Oct 201301_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
Package Data
TitleSizeDateVersion
PG-DSO-12-11 | TLE4473GV552AUMA1EN496 KB11 Apr 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints & Symbols - Altium - v1.03.6 MB02 Oct 201301_00
PCB Footprints & Symbols - Cadence - v1.02.6 MB02 Oct 201301_00
PCB Footprints & Symbols - Eagle - v1.0569 KB02 Oct 201301_00
PCB Footprints & Symbols - Mentor - v1.03.5 MB02 Oct 201301_00
EN TLE4473G+V55-2
What the designer should know: introduction to Automotive Linear Voltage Regulator linear-post-regulators
EN TLE42764D+V50
EN TLE8203E
MCDS_2013-08-28_22-26-35_MA000668590_PG-DSO-12-11.pdf TLE4473G+V55-2
EN TLE4473G+V55-2
PCB Footprints & Symbols - Altium - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Cadence - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Eagle - v1.0 IFX1763XEJ+V33
PCB Footprints & Symbols - Mentor - v1.0 IFX1763XEJ+V33