TLE4678-2LD

The TLE4678-2LD is a monolithic integrated low dropout fixed output voltage regulator for loads up to 200 mA. An input voltage of up to 45 V is regulated to an output voltage of 5 V. The integrated reset and watchdog function, as well as several protection circuits, combined with a wide operating temperature range offered by the TLE4678-2LD make it suitable for supplying microprocessor systems in automotive environments.The watchdog circuitry will be disabled in case the output current drops below a programmable threshold, enabling a microcontroller to switch in stand-by mode. Modifying the reset threshold is possible by an optional resistor divider. The TLE4678-2LD is available in a small thermally enhanced PG-SSOP-14 exposed pad package.

ParametricTLE4678-2LD
Operating Voltage  min  max3.3V  45.0V
Output Voltage Type5.0V
Accuracy2.0%
Output Current (max.)0.20A
Regulator TypeLinear
Dropout Voltage100mV
Quiescent Current0.06mA
Operating Temperature  min  max-40.0°C  150.0°C
Over Voltage Protectionno
Enable (=Inhibit)no
Resetyes
Power Failno
Power Goodno
Status Outputno
Holdno
Watchdogyes
Early Warningno
Sales Product NameTLE4678-2LD
OPNTLE46782LDXUMA1
Product Statusactive and preferred
Package NamePG-TSON-10
Completely lead freeyes
Halogen freeyes
RoHS compliantyes
Packing Size5000
Packing TypeTAPE & REEL
Summary of Features:
  • Output Voltage 5 V ± 2%
  • Current Capability 200 mA
  • Ultra Low Current Consumption
  • Very Low Dropout Voltage
  • Watchdog Circuit for Monitoring a Microprocessor with Programmable Load-dependent Activating Threshold
  • Reset Circuit Sensing the Output Voltage with Programmable Switching Threshold and Delay Time
  • Reset Output Active Low Down to V Q = 1 V
  • Separated Reset and Watchdog Output
  • Excellent Line Transient Robustness
  • Maximum Input Voltage -14 V ≤ V I ≤ +45 V
  • Reverse Polarity Protection
  • Short Circuit Protected
  • Overtemperature Shutdown
  • Automotive Temperature Range -40 °C ≤ T j ≤ 150 °C
  • Available in a small thermally enhanced PG-TSON-10 package
  • Green Product (RoHS Compliant)
  • AEC Qualified
Benefits:
  • Robust protection features
  • Wide input operation and temperature range
Target Applications:
  • Automotive general ECU's
  • Supply with Watchdog requirements
  • BCM , Dashboard supply
  • Supply with safety requirements
Diagrams
Data Sheet
TitleSizeDateVersion
TLE4678-2LD Data Sheet,EN2.3 MB11 Jun 201501_00
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 Jan 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2015-06-25_15-59-28_MA001238828_PG-TSON-10-2.pdfEN27 KB25 Jun 201501_00
Evaluation Boards
BoardFamilyDescriptionStatus
TLS810C1EJV33 BOARDLinear Voltage RegulatorThe TLS810C1EJV33 is a linear voltage regulator of wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 8.5μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810C1EJV33 is available in 3.3V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. With extended operating range down to 2.75V, TLS810C1EJV33 is also suitable to supply automotive systems operating during cranking condition. TLS810C1EJV33 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.Channel=ff80808112ab681d0112ab69bfb202efTLS810C1EJV33on request
TLS810D1EJV50 BOARDLinear Voltage RegulatorThe TLS810D1EJV50 is a linear voltage regulator featuring wide input voltage range, low drop out voltage and ultra low quiescent current. With an input voltage range of 2.75V to 42V and ultra low quiescent of only 9μA the regulators are perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810D1EJV50 is available in 5.0V output voltage version with an accuracy of 2 % and output current capability up to 100mA. It is stable with only a small ceramic capacitor of 1μF at the output. The device can be switched on and off by the Enable feature leading to a current consumption of less than 1μA. With extended operating range down to 2.75V, TLS810D1EJV50 is also suitable to supply automotive systems operating during cranking condition. TLS810D1EJV50 includes internal protection features like output current limitation and over-temperature shutdown. The output voltage is supervised by the Reset feature, including under-voltage reset and delayed reset release at power-on.TLS810D1EJV50on request
Package Data
TitleSizeDateVersion
PG-TSON-10-2 | TLE46782LDXUMA1EN496 KB11 Apr 201601_00
EN TLE4678-2LD
EN TLE8203E
EN TLE4678-2LD
EN TLE4678-2LD