| Parametric | TLE9861QXA20 |
|---|
| Instruction Set Architecture | ARM® Cortex® M3 |
|---|
| Solid Flash | 36.0kByte |
|---|
| RAM | 3.0kByte |
|---|
| Frequency | 24.0MHz |
|---|
| High Side Switch | 0 |
|---|
| Low Side Switch | 0 |
|---|
| High Voltage Monitor Input | 1 |
|---|
| GPIO | 10 |
|---|
| Interfaces | PWM |
|---|
| Operational Amplifier | Yes |
|---|
| MOSFET Drivers
(Low Side) | 2 |
|---|
| MOSFET Drivers
(High Side) | 2 |
|---|
| PN MOS DRIVER | No |
|---|
| Tj
max | 150.0°C |
|---|
| Sales Product Name | TLE9861QXA20 |
|---|
| OPN | TLE9861QXA20XUMA1 |
|---|
| Product Status | active and preferred |
|---|
| Package Name | PG-VQFN-48 |
|---|
| Completely lead free | yes |
|---|
| Halogen free | yes |
|---|
| RoHS compliant | yes |
|---|
| Packing Size | 2500 |
|---|
| Packing Type | TAPE & REEL |
|---|
| |
|---|
| Summary of Features:- Four current programmable Drivers with charge pump for N-Channel MOSFET
- Two Full duplex serial interface (UART)
- Two Synchronous serial channel (SSC)
- On-chip OSC and PLL for clock generation
- One high voltage monitoring input with wake up functionality
- High speed Operational amplifier for motor current sensing via shunt
- Measurement unit:
8-bit ADC module with 10 multiplexed inputs
10-bit ADC module with 8 multiplexed inputs, 5 external Analog inputs
On chip temperature and battery voltage measurement unit
- 8-bit ADC module with 10 multiplexed inputs
- 10-bit ADC module with 8 multiplexed inputs, 5 external Analog inputs
- On chip temperature and battery voltage measurement unit
- Independent Programmable window watchdog
- 5V/1.5V Internal supplies
- External Supply (VDDEXT): 5V+/-2% @ 20mA
- Power saving modes:
MCU slow-down Mode
Sleep Mode
Stop Mode
Cyclic wake-up Sleep Mode
- MCU slow-down Mode
- Sleep Mode
- Stop Mode
- Cyclic wake-up Sleep Mode
- 32 bit ARM Cortex M3 Core, up to 24 MHz clock frequency
- 36KB KByte flash memory for code and data
- 32 kByte Boot ROM memory in code space (used for boot code and IP storage)
- 3 kByte RAM memory
- Harvard architecture
- Thumb®-2 Instruction Set and hardware divide and multiplication unit
- Four 16-Bit timers
- Capture/compare unit for PWM signal generation (CCU6) with 2 x 16-bits timers
Benefits:- Complete system-on-chip for DC motor control
- Minimum number of external components reduce BOM cost
- PG-VQFN package with 7 x 7mm footprint enable PCB space saving
Target Applications:- Sunroof
- Power Window Lift
- Smart Motor Control via NFET H-Bridge
 |
