| H-BRIDGE KIT 2GO | Motor Driver (F/H-Bridge) | The H-Bridge Kit 2GO is a ready to use evaluation kit. It is fully populated with all electronic components equipped with the H-Bridge IFX9201 combined with an ARM® Cortex™-M0 CPU. Realize your own DC motor control. It is designed for the control of DC motors or other inductive loads up to 6 A or up to 36 V of SupplyIFX9201SG | on request |
| KIT_AK_SMALL_ENGINE | High/Low Side Switch, Microcontroller, Motor Driver (F/H-Bridge), Transceiver | The Starter Kit for 1- / 2-Cylinder Combustion Engines includes: Small Engine Control Unit, MECTRONIK MECLAB™ configuration and calibration software, U-Connect XC2704 Interface Board USB-CAN and Cable HarnessBTS3410KP254TLE4253TLE6250TLE8080TLE8444XC2733 | active |
| H-BRIDGE EVAL KIT | Motor Driver (F/H-Bridge), High/Low Side Switch, Microcontroller | The H-Bridge Egal Kit is an universal evaluation kit for the complete range of Infineon Powertrain H-Bridges which are designed for (but not limited to) the control of DC motors or other inductive loads up to 8.6 A in automotive applications.In order to ease up the selection of the right H-Bridge for your particular application a selection oridges is provided. Each H-Brif H-Bdge comes soldered on a device adaptor boards that can easily be exchanged. TLE5205TLE5206TLE6209TLE7209TLE8209TLE9201XC2734 Uconnect | on request |
| DEMOBOARD BTM7752G | Motor Driver (F/H-Bridge) | The Trilith IC 3G - H-Bridge Demo Board contains one Trilith IC in a typical H-bridge configuration including peripheral components and reverse polarity protection. Control signals can be supplied via a 26 pin header connector or a 96 pin board connector. The board is compatible to all members of the Trilith IC 3G family in a PGDSO36 package (like BTM7752G and BTM7755G).BTM7752G | on request |
| DEMOBOARD BTN8962TA | Motor Driver (F/H-Bridge) | The NovalithIC H-Bridge/Dual-Halfbridge Demo Board contains two NovalithICs used as two half-bridges or in atypical H-bridge configuration including peripheral components and reverse polarity protection. Control signals canbe supplied via a 26 pin header connector. The board is suitable for all members of the NovalithIC family.BTN8962TA | on request |
| DEMOBOARD BTN8982TA | Motor Driver (F/H-Bridge) | The NovalithIC H-Bridge/Dual-Halfbridge Demo Board contains two NovalithICs used as two half-bridges or in atypical H-bridge configuration including peripheral components and reverse polarity protection. Control signals canbe supplied via a 26 pin header connector. The board is suitable for all members of the NovalithIC family.BTN8982TA | on request |
| DC-MOTORCONTR_BTN8982 | Microcontroller, Motor Driver (F/H-Bridge) | The DC motor control shield from Infineon is one of the first high current motor control boards being compatible to Arduino as well as to Infineon’s XMC1100 Boot Kit. It is capable of driving two uni-directional DC motors (half bridge configuration) or one bi-directional DC motor (H-Bridge configuration).BTN8982XMC1100 Boot Kit | on request |
