ISL28136: 5MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amp

The ISL28136 is a low-power single operational amplifier optimized for single supply operation from 2.4V to 5.5V, allowing operation from one lithium cell or two Ni-Cd batteries. This device features a gain-bandwidth product of 5MHz and is unity-gain stable with a -3dB bandwidth of 13MHz.

This device features an Input Range Enhancement Circuit (IREC), which enables it to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.25V above the positive supply and to the negative supply with only a slight degradation of the CMRR performance. The output operation is rail-to-rail.

The part typically draws less than 1mA supply current while meeting excellent DC accuracy, AC performance, noise and output drive specifications. Operation is guaranteed over -40°C to +125°C temperature range.

Key Features
  • 5MHz Gain bandwidth product @ AV = 100
  • 13MHz -3dB unity gain bandwidth
  • 900µA typical supply current
  • 150µV maximum offset voltage (8 Ld SOIC)
  • 5nA typical input bias current
  • Down to 2.4V single supply voltage range
  • Rail-to-rail input and output
  • Enable pin
  • -40°C to +125°C operation
  • Pb-free (RoHS compliant)
Applications
  • Low-end audio
  • 4mA to 20mA current loops
  • Medical devices
  • Sensor amplifiers
  • ADC buffers
  • DAC output amplifiers
Typical Diagram
Application Notes
TitleTypeUpdatedSizeOther Languages
AN1728: Users Guide to Intersils Online Noninverting Op Amp DesignerPDF13 Nov 20141.04 MB
AN1652: iSim:PE Users GuidePDF13 Nov 20141.45 MB
AN1613: From SPICE Netlist to Allegro Design Sub-circuitPDF13 Nov 2014925 KB
AN1560: Making Accurate Voltage Noise and Current Noise Measurements on Operational Amplifiers Down to 0.1HzPDF13 Nov 20141.8 MB
AN1561: Radiated Interference in Audio CircuitsPDF13 Nov 2014370 KB
AN1556: Building an Accurate SPICE Model for Low Noise, Low Power Precision AmplifiersPDF13 Nov 2014866 KB
AN1548: Manual for the iSim Active Filter DesignerPDF13 Nov 20146.5 MB
Datasheets
TitleTypeUpdatedSizeOther Languages
ISL28136 DatasheetPDF17 Nov 2014674 KB
User Guides
TitleTypeUpdatedSizeOther Languages
ISL281x6EVAL1Z User GuidePDF13 Nov 2014201 KB
Order Information
Part NumberPackage TypeWeight(g)PinsMSL RatingPeak Temp (°C)RoHS Status
ISL28136FBZ8 Ld SOIC0.07283260RoHS
ISL28136FBZ-T78 Ld SOIC T+R0.07283260RoHS
ISL28136FHZ-T76 Ld SOT T+R0.01862260RoHS
ISL28136FHZ-T7A6 Ld SOT T+R0.01862260RoHS
ISL28136EVAL1ZN/ARoHS
ISL28136 Datasheet 17 Nov 2014
8 Ld SOIC T+R ISL1208
6 Ld SOT T+R ISL54504
ISL28136, ISL28236 Macromodel 31 Oct 2014
ISL28136
AN1728: Users Guide to Intersils Online Noninverting Op Amp Designer 13 Nov 2014
AN1652: iSim:PE Users Guide 13 Nov 2014
AN1613: From SPICE Netlist to Allegro Design Sub-circuit 13 Nov 2014
AN1560: Making Accurate Voltage Noise and Current Noise Measurements on Operational Amplifiers Down to 0.1Hz 13 Nov 2014
AN1561: Radiated Interference in Audio Circuits 13 Nov 2014
AN1556: Building an Accurate SPICE Model for Low Noise, Low Power Precision Amplifiers 13 Nov 2014
AN1548: Manual for the iSim Active Filter Designer 13 Nov 2014
ISL281x6EVAL1Z User Guide 13 Nov 2014