ISL32272E: Quad, ±16.5kV ESD Protected, 3.0V to 5.5V, Low Power, RS-422 Transmitters

The Intersil ISL32x7xE are ±16.5kV IEC61000-4-2 ESD Protected, 3.0V to 5.5V powered, QUAD transmitters for balanced communication using the RS-422 standard. These drivers have very low output leakage currents (±10µA), so they present a low load to the RS-422 bus.

Driver (Tx) outputs are tri-statable, and incorporate a hot plug feature to keep them disabled during power-up and down. Versions are available with a common EN/EN (‘172 pinout), a two channel EN12/EN34 (‘174 pinout), or a versatile combination of individual and group channel enables (see Table 1).

The ISL32372E, ISL32374E utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or from unterminated stubs in multidrop and multipoint applications. Drivers on the other versions are not limited, so they can achieve the 10Mbps or 32Mbps data rates. All versions are offered in Industrial and Extended Industrial (-40°C to +125°C) temperature ranges.

A 50% smaller footprint (compared to the TSSOP) is available with the ISL32179E’s QFN package. This device also features a logic supply pin (VL), that sets the switching points of the enable and DI inputs to be compatible with a lower supply voltage in mixed voltage systems. Two speed select pins allow the ISL32179E user to select from three slew rate options for 460kbps, 10Mbps, or 32Mbps data rates. Individual channel and group enable pins increase the ISL32179E’s flexibility.

Key Features
  • IEC61000 ESD Protection on RS-422 Outputs: ±16.5kV
    • Class 3 ESD Level on all Other Pins: 12kV HBM
    • High Machine Model ESD Level on all Pins: 700V
  • Wide Supply Range: 3.0V to 5.5V
  • Specified for +125°C Operation
  • Available in Industry Standard Pinouts (‘172/’174) or in a Space Saving QFN (ISL32179E) with Added Features
  • Logic Supply Pin (VL) Eases Operation in Mixed Supply Systems (ISL32179E Only)
  • User Selectable Data Rate (ISL32179E Only)
  • Hot Plug - Tx Outputs Remain Three-state During Power-up and Power-Down
  • Low Tx Leakage Allows > 256 Devices on the Bus
  • High Data Rates: up to 32Mbps
  • Low Quiescent Supply Current: 0.8mA (Max)
    • Low Shutdown Supply Current: 60µA
  • Current Limiting and Thermal Shutdown for Driver Overload Protection
  • Tri-statable Tx Outputs
  • 5V Tolerant Logic Inputs When VCC ≤ 5V
  • Pb-free (RoHS compliant)
Applications
  • Telecom Equipment
  • Motor Controllers / Encoders
  • Programmable Logic controllers
  • Industrial/Process Control Networks
Typical Diagram
Application Notes
TitleTypeUpdatedSizeOther Languages
AN1979: Surge Protection simplified with Intersil’s Overvoltage Protected (OVP) TransceiversPDF24 Aug 2016250 KB
AN1978: Surge Protection for Intersil’s Standard RS-485 TransceiversPDF18 Aug 2016199 KB
AN1976: Important Transient Immunity Tests for RS-485 NetworksPDF10 Aug 2016156 KB
AN1977: Transient Voltage Suppressors: Operation and FeaturesPDF09 Aug 2016198 KB
AN1980: Ground Potential Differences: Origin and RemediesPDF29 Jul 2016198 KB
Datasheets
TitleTypeUpdatedSizeOther Languages
ISL32172E, ISL32272E, ISL32372E, ISL32174E, ISL32274E, ISL32374E, ISL32179E DatasheetPDF13 Aug 2015944 KB
Tech Briefs
TitleTypeUpdatedSizeOther Languages
TB505: Understanding the Difference between HBM and IEC 61000-4-2 ESD ImmunityPDF29 Jul 2016121 KB
Order Information
Part NumberPackage TypeWeight(g)PinsMSL RatingPeak Temp (°C)RoHS Status
ISL32272EFBZ16 Ld SOIC0.152163260RoHS
ISL32272EFBZ-T16 Ld SOIC T+R0.152163260RoHS
ISL32272EFVZ16 Ld TSSOP0.054162260RoHS
ISL32272EFVZ-T16 Ld TSSOP T+R0.054162260RoHS
ISL32272EIBZ16 Ld SOIC0.152163260RoHS
ISL32272EIBZ-T16 Ld SOIC T+R0.152163260RoHS
ISL32272EIVZ16 Ld TSSOP0.054162260RoHS
ISL32272EIVZ-T16 Ld TSSOP T+R0.054162260RoHS
ISL32172E, ISL32272E, ISL32372E, ISL32174E, ISL32274E, ISL32374E, ISL32179E Datasheet 13 Aug 2015
16 Ld SOIC T+R ISL84523
20 Ld TSSOP T+R EL7583
ISL32174E
AN1979: Surge Protection simplified with Intersil’s Overvoltage Protected (OVP) Transceivers 24 Aug 2016
AN1978: Surge Protection for Intersil’s Standard RS-485 Transceivers 18 Aug 2016
AN1976: Important Transient Immunity Tests for RS-485 Networks 10 Aug 2016
AN1977: Transient Voltage Suppressors: Operation and Features 09 Aug 2016
AN1980: Ground Potential Differences: Origin and Remedies 29 Jul 2016
TB505: Understanding the Difference between HBM and IEC 61000-4-2 ESD Immunity 29 Jul 2016