• 简体中文
• English

The ISL70244SEH features two low-power amplifiers optimized to provide maximum dynamic range. These op amps feature a unique combination of rail-to-rail operation on the input and output as well as a slew enhanced front end that provides ultra fast slew rates positively proportional to a given step size; thereby increasing accuracy under transient conditions, whether it’s periodic or momentary. They also offer low power, low offset voltage and low temperature drift, making it ideal for applications requiring both high DC accuracy and AC performance. With <5μs recovery for Single Event Transients (SET) (LET_TH = 86.4MeV•cm²/mg), the number of filtering components needed is drastically reduced. The ISL70244SEH is also immune to single-event latch-up as it is fabricated in Intersil’s proprietary PR40 Silicon On Insulator (SOI) process.

They are designed to operate over a single supply range of 2.7V to 40V or a split supply voltage range of ±1.35V to ±20V. Applications for these amplifiers include precision instrumentation, data acquisition, precision power supply controls and process controls.

The ISL70244SEH is available in a 10 Ld hermetic ceramic flatpack that operates across the temperature range of -55°C to +125°C.

Key Features

• Electrically screened to DLA SMD # 5962-13248 Acceptance tested to 50krad(Si) (LDR) wafer-by-wafer
• <5μs recovery from SET (LETTH = 86.4MeV•cm2/mg)
• Unity gain stable
• Rail-to-rail input and output
• Wide gain·bandwidth product: 19MHz
• Wide single and dual supply range: 2.7V to 40V maximum
• Low input offset voltage: 400μV (+25°C, maximum)
• Low current consumption (per amplifier): 1.2mA, typical
• No phase reversal with input overdrive
• Slew rate
  • Large signal: 60V/μs
• Operating temperature range: -55°C to +125°C
• Radiation tolerance
  • High dose rate (50-300rad(Si)/s): 300krad(Si)
  • Low dose rate (0.01rad(Si)/s): 100krad(Si)*
  • SEL/SEB LETTH (VS = ±19V): 86.4MeV•cm2/mg * Product capability established by initial characterization

Applications

• Precision instruments
• Active filter blocks
• Data acquisition
• Power supply control
• Process control