The Intersil X93154 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface.
The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon during a subsequent power-up operation.
The device is connected as a two-terminal variable resistor and can be used in a wide variety of applications including:
$$ Bias and Gain Control$$ LCD Contrast Adjustment
Key Features
- Solid-State Potentiometer
- 3-Wire Serial Interface
- 32 Wiper Tap Points
- Wiper Position Stored in Nonvolatile Memory and Recalled on Power-up
- 31 Resistive Elements
- Temperature Compensated
- Maximum Resistance Tolerance of ±30%
- Terminal Voltage, 0 to VCC
- Low Power CMOS
- VCC = 3V ±10%
- Active Current, 250µA max.
- Standby Current, 1µA max.
- High Reliability
- Endurance 200,000 Data Changes per Bit
- Register Data Retention, 100 years
- RTOTAL Value = 50kΩ
- Package
- Pb-free (RoHS Compliant)
DatasheetsTitle | Type | Updated | Size | Other Languages |
---|
X93154 Datasheet | PDF | 16 Jul 2015 | 265 KB | |
Order InformationPart Number | Package Type | Weight(g) | Pins | MSL Rating | Peak Temp (°C) | RoHS Status |
---|
|
X93154UM8I-3 | 8 Ld MSOP | 0.025 | 8 | | 240 | |
|
|
X93154UM8I-3T1 | 8 Ld MSOP T+R | 0.025 | 8 | | 240 | |
|
|
X93154UM8IZ-3 | 8 Ld MSOP | 0.025 | 8 | 2 | 260 | RoHS |
|
|
X93154UM8IZ-3T1 | 8 Ld MSOP T+R | 0.025 | 8 | 2 | 260 | RoHS |
|
|
X93154UU8I-3-Z | 8 Ld DFN | NA | 8 | | 240 | |
|
|
X93154UU8IZ-3T1 | 8 Ld DFN T+R | NA | 8 | | 260 | RoHS |
|
|
X93154UX8I-3 | Retired - Please contact us for package data | | | | | |
|
|
X93154UX8I-3T1 | Retired - Please contact us for package data | | | | | |
|
|
|
|
XLABVIEW01Z | | | | N/A | | RoHS |
|
|