• 简体中文
• English

LT3480 - 36V, 2A, 2.4MHz Step-Down Switching Regulator with 70µA Quiescent Current

The LT3480 is an adjustable frequency (200kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 36V (60V maximum). A high efficiency 0.25Ω switch is included on the die along with a boost Schottky diode and the necessary oscillator, control, and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Low ripple Burst Mode operation maintains high efficiency at low output currents while keeping output ripple below 15mV in a typical application. In addition, the LT3480 can further enhance low output current efficiency by drawing bias current from the output when VOUT is above 3V. Shutdown reduces input supply current to less than 1µA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUT reaches 86% of the programmed output voltage. The LT3480 is available in 10-Pin MSOP and 3mm x 3mm DFN packages with exposed pads for low thermal resistance.

Features Wide Input Range:  Operation from 3.6V to 36V  Over-Voltage Lockout Protects Circuits through  60V Transient 2A Maximum Output Current Low Ripple Burst Mode Operation   70µA IQ at 12VIN to 3.3VOUT   Output Ripple < 15mV Adjustable Switching Frequency: 200kHz to 2.4MHz Low Shutdown Current: IQ < 1µA Integrated Boost Diode Synchronizable Between 250kHz to 2MHz Power Good Flag Saturating Switch Design: 0.25Ω On-Resistance 0.790V Feedback Reference Voltage Output Voltage: 0.79V to 20V Soft-Start Capability Small 10-Pin Thermally Enhanced MSOP and (3mm x 3mm) DFN Packages Typical Application

Applications Automotive Battery Regulation Power for Portable Products Distributed Supply Regulation Industrial Supplies Packaging

Demo Boards