LT6350 - Low Noise Single-Ended to Differential Converter/ADC Driver
The LT6350 is a rail-to-rail input and output low noise single-ended to differential converter/ADC driver featuring fast settling time. It converts a high or low impedance, single-ended input signal to a low impedance, balanced, differential output suitable for driving high performance differential succesive approximation register (SAR) ADCs. The two op amp topology features very low noise op amps, that can support SNR >110dB in a 1MHz bandwidth.
The input op amp is trimmed for constant low input-referred voltage offset over the input range to prevent VOS steps from degrading distortion.
The LT6350 draws 4.8mA from a 5V supply and consumes just 60μA in shutdown mode.
The LT6350 is available in a compact 3mm × 3mm, 8-pin leadless DFN package and also in an 8-pin MSOP package and operates over a –40°C to 125°C temperature range.
Features
Typical Application  | Applications
Packaging  |
| Part Number | Package | Temp | Price(1-99) | Price (1k)* |
|---|---|---|---|---|
| LT6350CDD#PBF | 3x3 DFN-8 | C | $3.64 | $2.59 |
| LT6350CDD#TRPBF | 3x3 DFN-8 | C | $2.65 | |
| LT6350CMS8#PBF | MS-8 | C | $3.64 | $2.59 |
| LT6350CMS8#TRPBF | MS-8 | C | $2.65 | |
| LT6350HDD#PBF | 3x3 DFN-8 | H | $4.48 | $3.19 |
| LT6350HDD#TRPBF | 3x3 DFN-8 | H | $3.25 | |
| LT6350HMS8#PBF | MS-8 | H | $4.48 | $3.19 |
| LT6350HMS8#TRPBF | MS-8 | H | $3.25 | |
| LT6350IDD#PBF | 3x3 DFN-8 | I | $4.06 | $2.89 |
| LT6350IDD#TRPBF | 3x3 DFN-8 | I | $2.95 | |
| LT6350IMS8#PBF | MS-8 | I | $4.06 | $2.89 |
| LT6350IMS8#TRPBF | MS-8 | I | $2.95 |
Demo Boards
| Part Number | Description | Price |
|---|---|---|
| DC1500A-A | LTC2393-16 with LT6350 optimized driver, 5V 16-bit 1Msps Int Ref Parallel / Serial SAR ADC in LQFP-48, req DC718 | $150.00 |
| DC1500A-B | LTC2392-16 with LT6350 optimized driver, 5V 16-bit 500ksps Int Ref Parallel / Serial SAR ADC in LQFP-48, req DC718 | $150.00 |
| DC1500A-C | LTC2391-16 with LT6350 optimized driver, 5V 16-bit 250ksps Int Ref Parallel / Serial SAR ADC in LQFP-48, req DC718 | $150.00 |
| DC1538A | LT6350 demo board | $75.00 |
| DC1783A-A | LTC2380-16 with LTC6655-5/LT6350 Demo Board | 16-Bit, 2Msps, SAR ADC with 96dB SNR. Req DC718 or DC2026 | $150.00 |
| DC1783A-B | LTC2378-16 with LTC6655-5/LT6350 Demo Board | 16-Bit, 1Msps, SAR ADC with 97dB SNR. Req DC718 or DC2026 | $150.00 |
| DC1783A-C | LTC2377-16 with LTC6655-5/LT6350 Demo Board | 16-Bit, 500ksps, SAR ADC with 97dB SNR. Req DC718 or DC2026 | $150.00 |
| DC1783A-D | LTC2376-16 with LTC6655-5/LT6350 Demo Board | 16-Bit, 250ksps, SAR ADC with 97dB SNR. Req DC718 or DC2026 | $150.00 |
| DC1783A-E | LTC2379-18 with LTC6655-5/LT6350 Demo Board | 18-Bit, 1.6Msps, SAR ADC with 101dB SNR. Req DC718 or DC2026 | $150.00 |
| DC1783A-F | LTC2378-18 with LTC6655-5/LT6350 Demo Board | 18-Bit, 1Msps, SAR ADC with 102dB SNR. Req DC718 or DC2026 | $150.00 |
| DC1783A-G | LTC2377-18 with LTC6655-5/LT6350 Demo Board | 18-Bit, 500ksps, SAR ADC with 102dB SNR. Req DC718 or DC2026 | $150.00 |
| DC1783A-H | LTC2376-18 with LTC6655-5/LT6350 Demo Board | 18-Bit, 250ksps, SAR ADC with 102dB SNR. Req DC718 or DC2026 | $150.00 |
| Part Number | Description | Price |
|---|---|---|
| DC718C | USB Data Acquisition Controller, for PScope Evaluation Kits (<135Mbps) | $300.00 |
| DC2026C | Linduino One Isolated USB Demo Board: An Arduino- and QuikEval-Compatible Code Development Platform | $75.00 |
| DC1075A | Clock Divider board | $50.00 |
- DN494 - 驱动一个低噪声、低失真 18 位、1.6Msps ADC
- A/D 转换器的保真度测试
- 应对驱动 SAR ADC 的挑战
- 轨至轨单端至差分放大器驱动高速 16 位至 18 位 SAR ADC
- AN132 - Fidelity Testing for A to D Converters
- DN494 - Driving a Low Noise, Low Distortion 18-Bit, 1.6Msps ADC
- R378 Reliability Data
- 18-Bit 1.6Msps SAR ADC 101dB SNR
- LTC2383: 16-Bit, 1Msps, 13mW SAR ADC
- LTC2393-16 - 16-Bit 1Msps SAR ADC
- Precision Signal Chain Products Selector Guide
- SAR ADC Drivers
- Rail-to-Rail Single-Ended to Differential Amplifier Drives High Speed 16- to 18-bit SAR ADCs
- LT6350 Footprints and Symbols
