The LT®8609/LT8609A/LT8609B is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7μA of non-switching quiescent current. The LT8609/LT8609A/LT8609B can deliver 2A of continuous current with peak loads of 3A (<1sec). Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock, or spread spectrum modulation for low EMI operation. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN UVLO or to shut down the part. A capacitor on the TR/SS pin programs the output voltage ramp rate during start-up while the PG flag signals when VOUT is within ±8.5% of the programmed output voltage as well as fault conditions. The LT8609A has slower switch edges for lower EMI emissions. The LT8609B operates in pulse-skipping mode only.
Part Number | Package | Temp | Price(1-99) | Price (1k)* |
---|---|---|---|---|
LT8609AEMSE#PBF | MS-10E | E | $3.57 | $2.50 |
LT8609AEMSE#TRPBF | MS-10E | E | $3.63 | $2.56 |
LT8609AIMSE#PBF | MS-10E | I | $3.93 | $2.75 |
LT8609AIMSE#TRPBF | MS-10E | I | $3.99 | $2.81 |
LT8609BEMSE#PBF | MS-10E | E | $3.43 | $2.40 |
LT8609BEMSE#TRPBF | MS-10E | E | $3.49 | $2.46 |
LT8609BIMSE#PBF | MS-10E | I | $3.77 | $2.64 |
LT8609BIMSE#TRPBF | MS-10E | I | $3.83 | $2.70 |
LT8609EMSE#PBF | MS-10E | E | $3.57 | $2.50 |
LT8609EMSE#TRPBF | MS-10E | E | $2.56 | |
LT8609HMSE#PBF | MS-10E | H | $4.29 | $3.00 |
LT8609HMSE#TRPBF | MS-10E | H | $3.06 | |
LT8609IMSE#PBF | MS-10E | I | $3.93 | $2.75 |
LT8609IMSE#TRPBF | MS-10E | I | $2.81 |
Part Number | Description | Price |
---|---|---|
DC2195A | LT8609EMSE Demo Board | µPower Sync Buck, 5.5V ≤ VIN ≤ 42V, 5Vout at 2A, FSW=2MHz | Contact Factory |
DC2195B-A | LT8609AEMSE Demo Board | µPower Sync Buck, Low EMI, 5.5V ≤ VIN ≤ 42V, Vout = 5V @ 2A, FSW = 2MHz | Contact Factory |