The LT®8613 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 3μA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. The built-in current sense amplifier with monitor and control pins allows accurate input or output current regulation and limiting. Low ripple Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN undervoltage lockout or to shut down the LT8613 reducing the input supply current to 1μA. A capacitor on the TR/SS pin programs the output voltage ramp rate during start-up. The PG flag signals when VOUT is within ±9% of the programmed output voltage as well as fault conditions. The LT8613 is available in a small 28-lead 3mm × 6mm QFN package with exposed pad for low thermal resistance.
Part Number | Package | Temp | Price(1-99) | Price (1k)* |
---|---|---|---|---|
LT8613EUDE#PBF | 3x6 QFN-28 | E | $7.43 | $5.20 |
LT8613EUDE#TRPBF | 3x6 QFN-28 | E | $5.26 | |
LT8613IUDE#PBF | 3x6 QFN-28 | I | $8.17 | $5.72 |
LT8613IUDE#TRPBF | 3x6 QFN-28 | I | $5.78 |
Part Number | Description | Price |
---|---|---|
DC2011A | LT8613EUDE Demo Board | Sync Buck, 5.8V ≤ VIN ≤ 42V, Vout = 5V @ 6A | $175.00 |