LTC1150 - ±15V Zero-Drift Operational Amplifier with Internal Capacitors

The LTC®1150 is a high-voltage, high-performance zero-drift operational amplifier. The two sample-and-hold capacitors usually required externally by other chopper amplifiers are integrated on-chip. Further, LTC’s proprietary high-voltage CMOS structures allow the LTC1150 to operate at up to 32V total supply voltage.

The LTC1150 has an offset voltage of 0.5µV, drift of 0.01µV/°C, 0.1Hz to 10Hz input noise voltage of 1.8µVP-P and a typical voltage gain of 180dB. The slew rate of 3V/µs and a gain bandwidth productof 2.5MHz are achieved with 0.8mA of supply current. Overload recovery times from positive and negative saturation conditions are 3ms and 20ms, respectively.

For applications demanding low power consumption, Pin 1 can be used to program the supply current. Pin 5 is an optional AC-coupled clock input, useful for synchronization.

The LTC1150 is available in standard 8-lead, plastic dual-in-line package, as well as an 8-lead SO package. The LTC1150 can be a plug-in replacement for most standard bipolar op amps with significant improvement in DC performance.

Features
  • High Voltage Operation, ±16V
  • No External Components Required
  • Maximum Offset Voltage 10µV
  • Maximum Offset Voltage Drift 0.05µV/°C
  • Low Noise 1.8µVp-p (0.1Hz to 10Hz)
  • Minimum Voltage Gain 135dB
  • Minimum PSRR 120dB
  • Minimum CMRR 110dB
  • Low Supply Current 0.8mA
  • Single Supply Operation 4.75V to 36V
  • Input Common Mode Range Includes Ground
  • 200µA Supply Current with Pin 1 Grounded
  • Typical Overload Recovery Time 20ms
Typical Application
LTC1150 Typical Application
LTC1150 Typical Application
Applications
  • Strain Gauge Amplifiers
  • Electronic Scales
  • Medical Instrumentation
  • Thermocouple Amplifiers
  • High Resolution Data Acquisition
Packaging
LTC1150 Package Drawing
LTC1150 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC1150CN8#PBFN-8C$4.60$3.70
LTC1150CS8#PBFSO-8C$5.40$4.40
LTC1150CS8#TRPBFSO-8C$4.46
Demo Boards
Part NumberDescriptionPrice
DC417BDIP8, MS8, S8, SOT23-6 | Multi-Footprint General Purpose Board for Single Op. Amp$25.00
Datasheet
Application Note
Design Note
Reliability Data
Product Selector Card
CAD Symbol
Related Products
LTC1150 - ±15V Zero-Drift Operational Amplifier with Internal Capacitors
AN43 - Bridge Circuits
AN45 - Measurement and Control Circuit Collection
AN78 - A Collection of Differential to Single-Ended Signal Conditioning Circuits for Use with the LTC2400, a 24-Bit No Latency Delta Sigma ADC in an SO-8
AN86 - A Standards Lab Grade 20-Bit DAC with 0.1ppm/° Drift: The Dedicated Art of Digitizing One Part Per Million
AN98 - Signal Sources, Conditioners and Power Circuitry Circuits of the Fall, 2004
DN42 - Chopper vs Bipolar Op Amps—An Unbiased Comparison
R235 Reliability Data
High Voltage Amplifiers
LTC1150 Footprints and Symbols