LTC3601 - 1.5A, 15V Monolithic Synchronous Step-Down Regulator

The LTC3601 is a high efficiency, monolithic synchronous buck regulator using a phase-lockable controlled on-time, current mode architecture capable of supplying up to 1.5A of output current. The operating supply voltage range is from 4V to 15V, making it suitable for a wide range of power supply applications.

The operating frequency is programmable from 800kHz to 4MHz with an external resistor enabling the use of small surface mount inductors. For switching noise sensitive applications, the LTC3601 can be externally synchronized over the same frequency range. An internal phase-locked loop aligns the on-time of the top power MOSFET to the internal or external clock. This unique constant frequency/ controlled on-time architecture is ideal for high step-down ratio applications that demand high switching frequencies and fast transient response.

The LTC3601 offers two operational modes: Burst Mode operation and forced continuous mode to allow the user to optimize output voltage ripple, noise, and light load efficiency for a given application. Maximum light load efficiency is achieved with the selection of Burst Mode operation while forced continuous mode provides minimum output ripple and constant frequency operation.

Features
  • 4V to 15V Operating Input Voltage Range
  • 1.5A Output Current
  • Up to 96% Efficiency
  • Very Low Duty Cycle Operation: 5% at 2.25MHz
  • Adjustable Switching Frequency: 800kHz to 4MHz
  • External Frequency Synchronization
  • Current Mode Operation for Excellent Line and Load Transient Response
  • User Selectable Burst Mode® (No Load IQ = 300μA) or Forced Continuous Operation
  • 0.6V Reference Allows Low Output Voltages
  • Short-Circuit Protected
  • Output Voltage Tracking Capability
  • Programmable Soft-Start
  • Power Good Status Output
  • Available in Small, Thermally Enhanced, 16-Pin QFN (3mm × 3mm) and MSOP Packages
Typical Application

Applications
  • Distributed Power Systems
  • Lithium-Ion Battery-Powered Instruments
  • Point-of-Load Power Supply
Packaging

Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC3601EMSE#PBFMS-16EE$3.29$2.30
LTC3601EMSE#TRPBFMS-16EE$2.36
LTC3601EUD#PBF3x3 QFN-16E$3.29$2.30
LTC3601EUD#TRPBF3x3 QFN-16E$2.36
LTC3601IMSE#PBFMS-16EI$3.87$2.71
LTC3601IMSE#TRPBFMS-16EI$2.77
LTC3601IUD#PBF3x3 QFN-16I$3.87$2.71
LTC3601IUD#TRPBF3x3 QFN-16I$2.77
Demo Boards
Part NumberDescriptionPrice
DC1353ALTC3601EUD Demo Board (QFN) | 4V ≤ VIN ≤ 15V, VOUT = 1.2V/1.8V/3.3V @ 1.5A$100.00
DC1454ALTC3601EMSE Demo Board (MSOP) | 4V ≤ VIN ≤ 15V, VOUT = 1.2V/1.8V/3.3V @ 1.5A$100.00
Datasheet
Reliability Data
LT Journal
Press Release
LTspice
LTpowerCAD
Related Product
LTC3601 - 1.5A, 15V Monolithic Synchronous Step-Down Regulator
LTC3601 Package Drawing LTC3601
R539 - Reliability Data
Two Monolithic DC/DC Converters Take 3.6V–15V Inputs Down to 0.6V at High Frequency, Shrinking Battery-Powered Applications in Everything from Handhelds to Automobiles
单片 DC/DC 转换器缩小汽车电池供电型应用尺寸
采用 3mm x 3mm QFN 封装的 15V、4MHz、同步降压型稳压器提供 1.5A 电流
LTC3601 Footprints and Symbols
LTC3601 Demo Circuit - 1.5A, 15V Synchronous Step-down Regulator (12V to 1.2V @ 1.5A)
LTC3601 Project - 1.5A, 15V Monolithic Buck Regulator (4.5-15V to 1.2V @ 1.5A)
LTC3601 Project - 1.5A, 15V Monolithic Buck Regulator (4.5-15V to 1.8V @ 1.5A)