LTC4065/LTC4065A - Standalone 750mA Li-Ion Battery Charger in 2 x 2 DFN

The LTC4065 is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion batteries. Its 2mm × 2mm DFN package and low external component count make the LTC4065 especially well-suited for portable applications. Furthermore, LTC4065 is specifically designed to work within USB power specifications.

The CHRG pin indicates when charge current has dropped to ten percent of its programmed value (C/10). An internal timer terminates charging according to battery manufacturer specifications.

No external sense resistor or blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates charge current to limit the die temperature during high power operation or high ambient temperature conditions.

When the input supply (wall adapter or USB supply) is removed, the LTC4065 automatically enters a low current state, dropping battery drain current to less than 1µA. With power applied, LTC4065 can be put into shutdown mode, reducing the supply current to less than 20µA.

The full-featured LTC4065 also includes automatic recharge, low-battery charge conditioning (trickle charging), soft-start (to limit inrush current) and an open-drain status pin to indicate the presence of an adequate input voltage (LTC4065A only).

The LTC4065 is available in a tiny 6-lead, low profile (0.75mm) 2mm × 2mm DFN package.

Features
  • Complete Linear Charger in 2mm × 2mm DFN Package
  • C/10 Charge Current Detection Output Timer Termination
  • Charge Current Programmable up to 750mA with 5% Accuracy
  • No External MOSFET, Sense Resistor or Blocking Diode Required
  • Preset 4.2V Float Voltage with 0.6% Accuracy
  • Constant-Current/Constant-Voltage Operation with
  • Thermal Feedback to Maximize Charging Rate Without Risk of Overheating
  • ACPR Pin Indicates Presence of Input Supply (LTC4065A Only)
  • Charge Current Monitor Output for Gas Gauging
  • Automatic Recharge
  • Charges Single Cell Li-Ion Batteries Directly from USB Port
  • 20µA Supply Current in Shutdown Mode
  • Soft-Start Limits Inrush Current
  • Tiny 6-Lead (2mm × 2mm) DFN Package
Typical Application

Applications
  • Wireless PDAs
  • Cellular Phones
  • Portable Electronics
Packaging
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC4065AEDC#PBF2x2 DFN-6E$1.58
LTC4065AEDC#TRMPBF2x2 DFN-6E$1.58$1.13
LTC4065AEDC#TRPBF2x2 DFN-6E$1.58$1.11
LTC4065EDC#PBF2x2 DFN-6E$1.58
LTC4065EDC#TRMPBF2x2 DFN-6E$1.58$1.13
LTC4065EDC#TRPBF2x2 DFN-6E$1.58$1.11
Demo Boards
Part NumberDescriptionPrice
DC763ALTC4065EDC Demo Board | Vin=3.75V-5.25V, 650mA Standalone Li-Ion Linear Battery Charger$75.00
Datasheet
Reliability Data
Press Release
Related Product
LTC4065/LTC4065A - Standalone 750mA Li-Ion Battery Charger in 2 x 2 DFN
LTC4065/LTC4065A - 2 x 2 DFN 封装的独立 750mA 锂离子电池充电器
R540 - Reliability Data
LTC4065/LTC4065A - 采用 2mm x 2mm 封装的微型 750mA 独立锂离子电池充电器
LTC4065 Footprints and Symbols