LTM2885 - 6500VRMS Isolated RS485/RS422 μModule Transceiver + Power

The LTM®2885 is a complete galvanically isolated full-duplex RS485/RS422 μModule® (micromodule) transceiver. No external components are required. A single supply powers both sides of the interface through an integrated, isolated, low noise, efficient 5V output DC/DC converter.

Coupled inductors and an isolation power transformer provide 6500VRMS of isolation between the line transceiver and the logic interface. This device is ideal for systems where the ground loop is broken allowing for large common mode voltage variation. Uninterrupted communication is guaranteed for common mode transients up to 50kV/μs.

Maximum data rates are 20Mbps or 250kbps in slew limited mode. Transmit data, DI, and receive data, RO, are implemented with event driven low jitter processing. The receiver has a one-eighth unit load supporting up to 256 nodes per bus. A logic supply pin allows easy interfacing with different logic levels from 1.62V to 5.5V, independent of the main supply.

Enhanced ESD protection allows this part to withstand up to ±15kV (human body model) on the transceiver interface pins to isolated supplies and ±25kV through the isolation barrier to logic supplies without latch-up or damage.

  • RS485/RS422 Transceiver: 6500VRMS for 1 Minute
  • Reinforced Insulation
  • Isolated DC Power: 5V at 150mA
  • No External Components Required
  • 20Mbps or Low EMI 250kbps Data Rate
  • High ESD: ±15kV HBM on Transceiver Interface
  • High Common Mode Transient Immunity: 50kV/μs
  • Integrated Selectable 120Ω Termination
  • Extended Creepage and Clearance ~14.6mm
  • 1.62V to 5.5V Logic Supply Pin for Flexible Digital Interface
  • Maximum Continuous Working Voltage: 690VRMS
  • High Input Impedance Failsafe RS485 Receiver
  • Current Limited Drivers and Thermal Shutdown
  • Compatible with TIA/EIA-485-A and PROFIBUS
  • High Impedance Output During Internal Fault Condition
  • Low Current Shutdown Mode (< 10μA)
  • General Purpose CMOS Isolated Channel
  • 22mm × 9mm × 5.16mm Surface Mount BGA Package
Typical Application
LTM2885 Typical Application
LTM2885 Typical Application
  • Isolated RS485/RS422 Interface
  • Industrial Networks
  • Breaking RS485 Ground Loops
  • Isolated PROFIBUS-DP Networks
LTM2885 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTM2885CY#PBF22mm x 9mm x 5.16mm BGAC$17.11$11.98
LTM2885HY#PBF22mm x 9mm x 5.16mm BGAH$24.23$16.96
LTM2885IY#PBF22mm x 9mm x 5.16mm BGAI$20.19$14.14
Demo Boards
Part NumberDescriptionPrice
DC1794ALTM2885 Demo Board | 6.5kV Isolated RS485/RS422 μModule Transceiver + Power$75.00
Product Selector Card
Press Release
Related Products
LTM2885 - 6500VRMS Isolated RS485/RS422 μModule Transceiver + Power
低 EMI、隔离型 RS485 µModule 收发器 可满足 IEC60601-1 严苛要求
6.5kV Isolated RS485 + 1W Power
μModule Isolators
Low EMI, Isolated RS485 µModule Transceiver Meets Stringent IEC 60601-1 Requirements