数据手册MAX1637 低电压、高精度降压控制器,用于便携式CPU供电 .pdf [英文Rev.2(PDF,312kB)]

{状况:生产中。}

The MAX1637 synchronous, buck, switch-mode power-supply controller generates the CPU supply voltage in battery-powered systems. The MAX1637 is a stripped-down version of the MAX1636 in a smaller 16-pin QSOP package. The MAX1637 is intended to be powered separately from the battery by an external bias supply (typically the +5V system supply) in applications where the battery exceeds 5.5V. The MAX1637 achieves excellent DC and AC output voltage accuracy. This device can operate from a low input voltage (3.15V) and delivers the excellent load-transient response needed by upcoming generations of dynamic-clock CPUs. Using synchronous rectification, the MAX1637 achieves up to 95% efficiency. Efficiency is greater than 80% over a 1000:1 load-current range, which extends battery life in system-suspend or standby mode. Excellent dynamic response corrects output load transients caused by the latest dynamic-clock CPUs within five 300kHz clock cycles. Powerful 1A on-board gate drivers ensure fast external N-channel MOSFET switching. The MAX1637 features a logic-controlled and synchronizable, fixed-frequency, pulse-width-modulation (PWM) operating mode. This reduces noise and RF interference in sensitive mobile-communications and pen-entry applications. Asserting the SKIP-bar pin enables fixed-frequency mode, for lowest noise under all load conditions. For a stand-alone device that includes a +5V VL linear regulator and low-dropout capabilities, refer to the MAX1636 data sheet.

产品关键特性
  • ±2% DC Accuracy
  • 0.1% (typ) DC Load Regulation
  • Adjustable Switching Frequency to 350kHz
  • Idle Mode™ Pulse-Skipping Operation
  • 1.10V to 5.5V Adjustable Output Voltage
  • 3.15V Minimum IC Supply Voltage (at VCC pin)
  • Internal Digital Soft-Start
  • 1.1V ±2% Reference Output
  • 1µA Total Shutdown Current
  • Output Overvoltage Crowbar Protection
  • Output Undervoltage Shutdown (foldback)
  • Tiny 16-Pin QSOP Package
应用与使用范围
  • 手持终端、PDA
  • 笔记本电脑
  • 亚笔记本电脑
典型工作电路

芯片订购型号
订购型号产品状态封装形式工作温度RoHS/无铅
MAX1637EEE生产中QSOP;16引脚;30.9mm²封装信息-40°C至+85°CRoHS/无铅:否材料分析
MAX1637EEE+生产中QSOP;16引脚;30.9mm²封装信息-40°C至+85°CRoHS/无铅:无铅材料分析
MAX1637EEE+T生产中QSOP;16引脚;30.9mm²封装信息-40°C至+85°CRoHS/无铅:无铅材料分析
MAX1637EEE-T生产中QSOP;16引脚;30.9mm²封装信息-40°C至+85°CRoHS/无铅:否材料分析
功能接近器件
MAX1636低电压、高精度降压型控制器,用于便携式CPU电源
评估板与开发套件
MAX1637EVKITMAX1637评估板
相关芯片型号
MAX1637EVKITMAX1637评估板
MAX1637.pdf MAX1637
Auto-Retry Controller Suits Telecom Applications MAX6342
HFAN-08.2.1: PWM Temperature Controller for Thermoelectric Modules Keeps Components within 0.1°C MAX4250
A 3.3V Input Step-Down Converter for CPU Cores MAX1637
DDR Memory-Termination Supply is Flexible for 2.5V and 1.8V Memory Systems MAX4130
典型工作电路 MAX1637