数据手册：MAX1710EVKIT .pdf [英文Rev.0(PDF,296kB)]
{状况：生产中。}
The MAX1710 evaluation kit (EV kit) demonstrates the data sheet’s standard 7A notebook CPU application circuit (see MAX1710/MAX1711 data sheet). This DC-DC converter steps down high-voltage batteries and/or AC adapters, generating a precision, low-voltage CPU core VCC rail.
The circuit was designed for a 7V to 24V battery range, but accommodates from 4.5V to 24V. Some parameters, such as load-transient response and maximum thermal load capability, may be degraded by going outside the 7V to 24V range. The continuous output current rating, based on worst-case MOSFET RDS(ON), heat sinking, and other thermal stress issues, is 5.5A at TA = +70°C.
This EV kit is a fully assembled and tested circuit board. It also allows the evaluation of the MAX1711.
产品关键特性
- High Speed, Accuracy, and Efficiency
- Fast-Response QUICK-PWM™ Architecture
- 7V to 24V Input Voltage Range
- 1.25V to 2V Output Voltage Range
- 7A Peak Load-Current Capability
(5.5A Continuous)
- 93% Efficient (VOUT = 2V, VBATT = 7V,
ILOAD = 4A)
- 300kHz Switching Frequency
- No Current-Sense Resistor
- Remote GND and VOUT Sensing
- Power-Good Output
- 24-Pin QSOP Package
- Low-Profile Components
- Fully Assembled and Tested
| 应用与使用范围
- CPU核DC-DC转换器
- 坞站
- 笔记本电脑
- 单级(电池至VCORE)变换器
- 两级(+5V至VCORE)变换器
|
芯片订购型号
| 订购型号 | 产品状态 | 封装形式 | 工作温度 | RoHS/无铅 |
| MAX1710EVKIT | 生产中 | KIT；封装信息 | | 参考数据资料 |
相关芯片型号
