数据手册：MAX1760EVKIT .pdf [英文Rev.1(PDF,136kB)]
{状况：生产中。}
The MAX1760 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a boost switching-regulator circuit. The EV kit provides a regulated +3.3V output at up to 800mA of current. The input voltage range is +0.7V to +5.5V. However, the output voltage will rise above the regulation point for input voltages exceeding 3.3V. A one- or two-cell battery input can also be used to power the EV kit.
The MAX1760 features an internal N-channel MOSFET switch, a synchronous rectifier, and a pin-selectable forced PWM mode. The MAX1760 EV kit demonstrates low quiescent current and power efficiency up to 96%, thus increasing battery life. Operation at 1MHz allows the use of tiny surface-mount components.
产品关键特性
- +0.7V to +5.5V Input Voltage
- +3.3V Output Voltage
- Internal Synchronous Rectifier Provides up to 96% Efficiency
- Output is Adjustable with External Resistors
- Up to 800mA Output
- On-Chip N-Channel Switch
- 1µA Shutdown Current
- 1MHz Switching Frequency
- Fixed-Frequency PWM Operation
- Surface-Mount Components
- Fully Assembled and Tested
| 应用与使用范围
- 电缆调制解调器
- 蜂窝电话
- 消费类音频
- 无绳电话
- 数码相机
- 全球定位系统(GPS)
- 寻呼机
- 笔输入掌上电脑
- POS终端
- 无线数据
- 无线局域网(WLAN)
- 无线本地环路(WLL)
|
芯片订购型号
| 订购型号 | 产品状态 | 封装形式 | 工作温度 | RoHS/无铅 |
| MAX1760EVKIT | 生产中 | KIT；封装信息 | | 参考数据资料 |
相关芯片型号
