• 简体中文
• English

MAX792L, MAX792M, MAX792R, MAX792S, MAX792T：Microprocessor and Nonvolatile Memory Supervisory Circuits

Microprocessor and Non-Volatile Memory Supervisory Circuits

The MAX792/MAX820 microprocessor (µP) supervisory circuits provide the most functions for power-supply and watchdog monitoring in systems without battery backup. Built-in features include the following: µP reset: Assertion of RESET and active-low RESET outputs during power-up, power-down, and brownout conditions. Active-low RESET is guaranteed valid for VCC down to 1V. Manual-reset input. Two-stage power-fail warning: A separate low-line comparator compares VCC to a preset threshold 120mV above the reset threshold; the low-line and reset thresholds can be programmed externally. Watchdog fault output: Assertion of active-low WDO if the watchdog input is not toggled within a preset timeout period. Pulsed watchdog output: Advance warning of impending active-low WDO assertion from watchdog timeout that causes hardware shutdown. Write protection of CMOS RAM, EEPROM, or other memory devices. The MAX792 and MAX820 are identical, except the MAX820 guarantees higher low-line and reset threshold accuracy (±2%).

Key Features Manual-Reset Input 200ms Power OK/Reset Time Delay Independent Watchdog Timer-Preset or Adjustable On-Board Gating of Chip-Enable Signals Memory Write-Cycle Completion 10ns (max) Chip-Enable Gate Propagation Delay Voltage Monitor for Overvoltage Warning ±2% Reset and Low-Line Threshold Accuracy (MAX820, external programming mode)

MAX792, MAX792L, MAX792M, MAX792R, MAX792S, MAX792T, MAX820, MAX820L, MAX820M, MAX820R, MAX820S, MAX820T: Typical Operating Circuit Applications/Uses Computers: Desktop, Workstation, Server Controllers Critical µP Monitoring Intelligent Instruments

DataSheet

Parametrics

Related Products

• MAX791：Microprocessor Supervisory Circuit
• MAX800：Microprocessor Supervisory Circuits
• MAX794：3.0V/3.3V Adjustable Microprocessor Supervisory Circuits

Ordering Information