• 简体中文
• English

EVB-USB5744 EVB-USB5744 USB3.1 Gen1 Controller Hub Evaluation Board

The EVB-USB5744 is a demonstration and evaluation platform that provides the necessary requirements and interface options for evaluating the USB5744 Smart Hub on a 4-layer RoHS-compliant Printed Circuit Board (PCB). This will allow the user to gain an understanding of the product and accelerate the integration of the EVB-USB5744 into the user’s design. The EVB-USB5744 is compliant with the USB 3.1 Gen 1 USB Specification and supports Super-Speed (SS), High-Speed (HS), Full-Speed (FS), and Low-Speed (LS) USB signaling for complete coverage of all defined USB operation speeds. The evaluation platform supports four downstream ports that are USB 2.0 and USB 3.1 Gen 1 compliant. The EVB-USB5734 is also designed for flexible configuration solutions. It can be configured via default internal register settings, downloadable external firmware to an on-board SPI Flash, through SMBus, or through the on-board configuration switches. 

• USB5744 in a 56-pin QFN RoHS compliant package
• USB 3.1 Gen 1 compliant (SS, HS, FS, and LS operation)
• USB pins are 5 V tolerant
• Self powered operation
• Four downstream USB 2.0/3.1 Gen 1 ports
• All downstream ports support individual port power and overcurrent sense
• All downstream ports are battery charge enabled (2.1A max per port)
• Can support up to 5A down stream Port Power at any one time
• Onboard SPI Flash for external downloadable firmware
• Low-cost 4-layer space saving design
• Operates from a single voltage (+12.0 V, regulated) external power supply
• Onboard 25 MHz crystal or external clock input
• Single onboard +5.25 V, 6 Amp regulator
• Single onboard +3.3 V, 0.5 Amp regulator
• Single onboard +1.2 V, 1 Amp regulator
• Port Power and Port Enable LED indicators
• LED indicators for SPI/Strap Configuration

Documentation & Software