Features- Supports both Classic CAN or CAN Flexible Data Rate applications
- Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
- Meets the latest ISO/DIS 11898-2:2015 specification
- Supports Wake-up pattern
- AEC-Q100 Grade 0
- Very Low Standby Current (5 μA, typical)
- VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.7V to 5.5V I/O
- CAN Bus Pins are Disconnected when Device is Unpowered
- An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
- Detection of Ground Fault:
- Permanent Dominant Detection on TXD
- Permanent Dominant Detection on Bus
- Power-on Reset and Voltage Brown-Out Protection on VDD Pin
- Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
- Protection Against High-Voltage Transients in Automotive Environments
- Automatic Thermal Shutdown Protection
- Suitable for 12V and 24V Systems
- Extremely robust meeting automotive EMC hardware requirements
- Smallest package option in the industry 2x3 DFN-8L
- Also available in SOIC-8L and 3x3 DFN-8L
- Temperature ranges:
- Extended (E): -40°C to +125°C
- High (H): -40°C to +150°C
| Parameter|
Parameter Name
Value
| Value | |
Temp. Range (°C)
-40 to 150
|
-40 to 150
| |
Operating Voltage Range (V)
4.5 to 5.5
|
4.5 to 5.5
|
|
