MCP4442

The MCP444X devices are non-volatile, 7-bit (129 wiper steps) digital potentiometers with EEPROM and an I2C compatible interface. The MCP444X family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer WiperLock™ Technology which allows the user unlimited reprogramming and locking of the wiper setting. It is useful for equipment that requires factory trimming or recalibration. The MCP444X devices offer a variety of configurations simplifying design while minimizing cost, package size and pin count.

Features
  • Quad Resistor Network
  • Potentiometer or Rheostat configuration options
  • Resistor Network Resolution: 7-bit – 128 Resistors (129 Taps)
  • 7-bit – 128 Resistors (129 Taps)
  • Four RAB Resistances options: 5kΩ 10kΩ 50kΩ 100kΩ
  • 5kΩ
  • 10kΩ
  • 50kΩ
  • 100kΩ
  • Zero-scale to Full-scale Wiper Operation
  • Low Wiper Resistance – 75Ω typical
  • Low Tempco: Absolute (Rheostat) – 50 ppm typical (0°-70°C) Ratiometric (Potentiometer) – 15 ppm typical
  • Absolute (Rheostat) – 50 ppm typical (0°-70°C)
  • Ratiometric (Potentiometer) – 15 ppm typical
  • Non-volatile Memory Automatic Recall of Saved Wiper Setting WiperLock™ Technology 5 General Purpose Memory Locations
  • Automatic Recall of Saved Wiper Setting
  • WiperLock™ Technology
  • 5 General Purpose Memory Locations
  • I2C™Compatible Serial Interface Support: 100 kHz 400 kHz 3.4 MHz
  • 100 kHz
  • 400 kHz
  • 3.4 MHz
  • Serial Protocol Allows : High-Speed Read/Write to wiper Read/Write to EEPROM Write Protect to be enabled/disable WiperLock to be enabled/disabled Resistor Network Terminal Disconnect Feature via Terminal Control (TCON) Register Reset Input Pin
  • High-Speed Read/Write to wiper
  • Read/Write to EEPROM
  • Write Protect to be enabled/disable
  • WiperLock to be enabled/disabled
  • Resistor Network Terminal Disconnect Feature via Terminal Control (TCON) Register
  • Reset Input Pin
  • Write Protect Feature: Hardware Write Protect (WP) Control pin Software Write Protect (WP) Configuration bit
  • Hardware Write Protect (WP) Control pin
  • Software Write Protect (WP) Configuration bit
  • Brown-out Reset Protection – 1.5V typical
  • Serial Interface Inactive Current – 2.5 uA typical
  • High-Voltage Tolerant Digital Inputs Up to 12.5V
  • Supports Split Rail Applications
  • Wide Operating Voltage: 2.7V to 5.5V - Device Characteristics Specified 1.8V to 5.5V - Device Operation
  • 2.7V to 5.5V - Device Characteristics Specified
  • 1.8V to 5.5V - Device Operation
  • Wide Bandwidth (-3 dB) Operation – 2 MHz typical for 5.0Ω Device
  • Extended Temperature Range (-40°C to +125°C)
  • Package Types: TSSOP-20
  • AEC-Q100 Grade 1 quarlified
Parameter
Parameter Name Value Value
Temp. Range (°C) -40 to +125 -40 to +125
Volatile / Non Volatile Non-volatile Non-volatile
Number of Taps 129 129
Resistance (ohms) K 5, 10, 50, 100 5, 10, 50, 100
# per Package 4 4
INL (Max) 0.8 0.8
DNL (Max) 0.375 0.375
Interface I²C™ I²C™
Documents
MCP444X Data SheetData Sheets09/29/20104745KB
AN1080 - Understanding Digital Potentiometers Resistor VariationsAppNote07/27/2009565KB
AN1316 - Using Digital Potentiometers for Programmable Amplifier GainAppNote04/14/2010441KB
AN219 - Comparing Digital Potentiometers to Mechanical PotentiometersAppNote11/20/2000133KB
AN691 - Optimizing the Digital Potentiometer in Precision CircuitsAppNote05/08/2001240KB
AN737 - Using Digital Potentiometers to Design Low Pass Adjustable FiltersAppNote02/24/2004277KB
Digital Potentiometer Design GuideDesign Guides01/03/2011706KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP4442-103E/ST14TSSOP-40C to +125CTUBE1.351.131.020.990.98
MCP4442-104E/ST14TSSOP-40C to +125CTUBE1.351.131.020.990.98
MCP4442-502E/ST14TSSOP-40C to +125CTUBE1.351.131.020.990.98
MCP4442-503E/ST14TSSOP-40C to +125CTUBE1.351.131.020.990.98
MCP4442T-103E/ST14TSSOP-40C to +125CT/R1.351.131.020.990.98
MCP4442T-104E/ST14TSSOP-40C to +125CT/R1.351.131.020.990.98
MCP4442T-502E/ST14TSSOP-40C to +125CT/R1.351.131.020.990.98
MCP4442T-503E/ST14TSSOP-40C to +125CT/R1.351.131.020.990.98
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP4442T-502E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4442T-103E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4442-502E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4442-103E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4442T-503E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4442-503E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4442-104E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4442T-104E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP444X Data Sheet MCP4462
AN1080 MCP4XXXDM-DB
AN1316 MCP46XXEV
AN1316 Excel Files MCP46XXEV
AN219 MCP4662
AN691 MCP4651
AN737 MCP4662
Digital Potentiometer Design Guide SOIC8EV