Features- Quad Resistor Network
- Potentiometer or Rheostat configuration options
- Resistor Network Resolution:
7-bit – 128 Resistors (129 Taps)
8-bit: 256 Resistors (257 Taps)
- 7-bit – 128 Resistors (129 Taps)
- 8-bit: 256 Resistors (257 Taps)
- Four RAB Resistances options:
5 kohm
10 kohm
50 kohm
100 kohm
- 5 kohm
- 10 kohm
- 50 kohm
- 100 kohm
- Zero-scale to Full-scale Wiper Operation
- Low Wiper Resistance – 75 ohm typical
- Low Tempco:
Absolute (Rheostat) – 50 ppm typical (0°-70°C)
Ratiometric (Potentiometer) – 15 ppm typical
- Absolute (Rheostat) – 50 ppm typical (0°-70°C)
- Ratiometric (Potentiometer) – 15 ppm typical
- I2C™Compatible Serial Interface Support:
100 kHz
400 kHz
3.4 MHz
- 100 kHz
- 400 kHz
- 3.4 MHz
- Serial Protocol Allows :
High-Speed Read/Write to wiper
Read/Write to EEPROM
Write Protect to be enabled/disable
WiperLock to be enabled/disabled
Resistor Network Terminal Disconnect Feature via Terminal Control (TCON) Register
Reset Input Pin
Write Protect Feature:
Hardware Write Protect (WP) Control pin
Software Write Protect (WP) Configuration bit
Brown-out Reset Protection – 1.5V typical
Serial Interface Inactive Current – 2.5 uA typical
High-Voltage Tolerant Digital Inputs Up to 12.5V
Supports Split Rail Applications
Internal Weak Pull-up on All Digital Inputs, except SCL and SDA
Wide Operating Voltage:
2.7V to 5.5V - Device Characteristics Specified
1.8V to 5.5V - Device Operation
Wide Bandwidth (-3 dB) Operation – 2 MHz typical for 5.0 kohm Device
Extended Temperature Range (-40°C to +125°C)
Package Types: 4x4 QFN-20 and TSSOP-20
AEC-Q100 Grade 1 quarlified
- High-Speed Read/Write to wiper
- Read/Write to EEPROM
- Write Protect to be enabled/disable
- WiperLock to be enabled/disabled
- Resistor Network Terminal Disconnect Feature via Terminal Control (TCON) Register
- Reset Input Pin
- Write Protect Feature:
Hardware Write Protect (WP) Control pin
Software Write Protect (WP) Configuration bit
- Hardware Write Protect (WP) Control pin
- Software Write Protect (WP) Configuration bit
- Brown-out Reset Protection – 1.5V typical
- Serial Interface Inactive Current – 2.5 uA typical
- High-Voltage Tolerant Digital Inputs Up to 12.5V
- Supports Split Rail Applications
- Internal Weak Pull-up on All Digital Inputs, except SCL and SDA
- Wide Operating Voltage:
2.7V to 5.5V - Device Characteristics Specified
1.8V to 5.5V - Device Operation
- 2.7V to 5.5V - Device Characteristics Specified
- 1.8V to 5.5V - Device Operation
- Wide Bandwidth (-3 dB) Operation – 2 MHz typical for 5.0 kohm Device
- Extended Temperature Range (-40°C to +125°C)
- Package Types: 4x4 QFN-20 and TSSOP-20
- AEC-Q100 Grade 1 quarlified
| Parameter|
Parameter Name
Value
| Value | |
Temp. Range (°C)
-40 to +125
|
-40 to +125
| |
Volatile / Non Volatile
Volatile
|
Volatile
| |
Number of Taps
257
|
257
| |
Resistance (ohms) K
5, 10, 50, 100
|
5, 10, 50, 100
| |
# per Package
4
|
4
| |
INL (Max)
1
|
1
| |
DNL (Max)
0.5
|
0.5
| |
Interface
I²C™
|
I²C™
|
|
